User's Manual
Table Of Contents
- 1 Safety and Compliance
- 1.1 Safety and Usage
- 1.1.1 Usage Warning
- 1.1.2 Emergency Warning
- 1.1.3 Child Safety
- 1.1.4 Infrared Warning
- 1.1.5 Epilepsy Warning
- 1.1.6 Mechanical Shock Warning
- 1.1.7 Bending Warning
- 1.1.8 Do not open the devices
- 1.1.9 Connectors
- 1.1.10 HDMI Cable Warning
- 1.1.11 Environment
- 1.1.12 Battery Warning
- 1.1.13 Wireless Warning
- 1.1.14 Transportation
- 1.1.15 Accessories
- 1.1.16 Cleaning
- 1.1.17 Disposal
- 1.2 Compliance Information
- 1.3 Other limitations and considerations
- 1.3.1 Intended use
- 1.3.2 SD memory cards
- 1.3.3 Multiple connections between Glasses Controller Software and Recording Unit
- 1.3.4 Eye movement classification
- 1.3.5 Light conditions
- 1.3.6 Eyelashes
- 1.3.7 Droopy eyelids
- 1.3.8 Eye glasses and contact lenses
- 1.3.9 WLAN connectivity
- 1.3.10 Power
- 1.3.11 Keeping Tobii Glasses Controller Software and the Recording Unit firmware up to date
- 1.1 Safety and Usage
- 2 Introduction
- 3 Installing and Updating Tobii Glasses Controller Software
- 4 Updating the Tobii Glasses Recording Unit firmware
- 5 Getting to know Tobii Glasses 2
- 6 Workflow Quick Guide
- 7 Basic Operations with Tobii Glasses 2
- 7.1 Setting up Tobii Glasses 2 hardware
- 7.1.1 Charging Recording Unit batteries
- 7.1.2 Inserting/removing the battery – Glasses Recording Unit
- 7.1.3 Inserting/removing an SD memory card in the Recording Unit
- 7.1.4 Connecting the HDMI cable
- 7.1.5 Changing nose pads (remove and mount new):
- 7.1.6 Changing the lenses on the Head Unit
- 7.1.7 Turning Tobii Glasses 2 on and off
- 7.2 Managing study data in Tobii Glasses Controller Software
- 7.3 Connecting the Tablet running Tobii Glasses Controller Software to a Recording Unit
- 7.4 Fitting the Tobii Glasses 2 Eye Tracker onto a participant for recording
- 7.5 Recording with Tobii Glasses 2
- 7.6 Watching a recording live with the Live Viewer
- 7.7 Locating recordings
- 7.8 Replaying a recording
- 7.9 Exporting a gaze replay video
- 7.10 Deleting a recording
- 7.11 Backing up recorded data
- 7.12 Other operations and information
- 7.13 Tobii Glasses Controller Software considerations and limitations
- 7.1 Setting up Tobii Glasses 2 hardware
- 8 Advanced Usage with Multiple Units
- 9 Accessories
- Appendix A Technical Specifications
- Appendix B Calibration target
known beforehand, entering this information into the Tobii Glasses Controller Software in advance of data collection may simpli-
fy the participant set up process in the field.
Participants cannot be deleted or removed once they have been created in Tobii Glasses Controller Software.
To add a new participant to your study:
1. Tap Participants on the Menu bar.
2. Tap New Participant in the lower right hand corner. A Create new participant dialog box opens.
3. Type the participant’s name in the participant field and participant details in the participant info field.
4. Tap Create to add the participant to the study.
7.2.3 Opening a study (and switching from one study to another)
To open a study:
1. Tap Studies.
2. Tap Open for the study that you want to open. The list of studies can be sorted and searched.
7.2.4 Deleting a study in Tobii Glasses Controller Software
Deleting a study will only erase the meta data and information in Tobii Glasses Controller Software. It will not affect
any recordings and data stored on any SD memory card in the Recording Unit. Once a study is deleted it is no longer
possible to replay recordings or view information about recordings or participants from Glasses Controller Software.
Data on the SD memory cards can still be imported into Tobii Glasses Analysis Software.
To delete a study:
1. Tap Studies.
2. In the My Studies dialog, select the studies you want to delete by ticking the boxes.
3. Tap Delete. A confirmation dialog box appears.
4. Tap Yes, delete this study to confirm deleting of the study.
7.3 Connecting the Tablet running Tobii Glasses Controller Software to a
Recording Unit
For Tobii Glasses Controller Software to be able to send or receive information to/from Tobii Glasses 2, the Recording Unit and
the tablet/computer running Tobii Glasses Controller Software must be connected to each other. The connection can either be
established over WLAN
6
(wireless) or with an Ethernet cable (if using an Ethernet cable, a USB/LAN adapter needs to be in-
stalled on the tablet running Tobii Glasses Controller Software). The Recording Unit works as a network access point, and a
computer running Tobii Glasses Controller Software connects to it in a way similar to how a computer would connect to any
network.
7.3.1 Connecting/Disconnecting over WLAN
To wirelessly connect the tablet/computer running Tobii Glasses Controller Software to the Recording Unit:
7
1. Open the Charms bar by sliding your finger inward from the screen’s right edge in Windows 8/8.1.
2. Tap settings in the Charms bar.
3. Tap the Wireless network icon. A list of available networks will appear. (It may take up to two minutes before a newly
started Recording Unit appears in the list of available networks.)
Tobii Glasses 2 Eye TrackerUser’s manual v.1.0.2 - en-US
7 Basic Operations with Tobii Glasses 2
23
6. Not available in the Tobii Glasses 2 Live View Package.
7. Not available in the Tobii Glasses 2 Live View Package.