User's Manual

2.3 Power Supply and Batteries

The Tobii Dynavox I-Series device contains a rechargeable battery. All rechargeable batteries degrade over time. Thus

the possible usage times for the Tobii Dynavox I-Series after a full charge can become shorter over time than when

the device was new.

The Tobii Dynavox I-Series device uses a Li-ion Polymer battery.

If you are in a hot environment, be aware that it can affect the ability to charge the battery. The internal temperature

has to be between 0 ഒ/32 ഘ and 45 ഒ/113 ഘ for the battery to charge. If the internal battery temperature raises

above 45 ഒ/113 ഘ the battery will not charge at all.

Move the Tobii Dynavox I-Series device to a cooler environment to let the battery charge properly.

Avoid exposing the Tobii Dynavox I-Series device to fire or to temperatures above 60 ഒ/140 ഘ. These conditions

may cause the battery to malfunction, generate heat, ignite or explode. Be aware that it is possible, in a worst case

scenario, for temperatures to reach greater than those stated above in, for example, the trunk of a car on a hot day.

So, storing the Tobii Dynavox I-Series device, in a hot car trunk could conceivably lead to a malfunction.

Only charge the Tobii Dynavox I-Series battery in an ambient temperature of 0 ഒ/32 ഘ to 45 ഒ/113 ഘ.

Use only the supplied power adapter to charge the Tobii Dynavox I-Series device. Using unauthorized power adapters

may severely damage the Tobii Dynavox I-Series device.

Do not open, or modify, the casing of the Tobii Dynavox I-Series device or of the power supply, since you may be ex-

posed to potentially hazardous electrical voltage. The device contains no serviceable parts. If the

Tobii Dynavox I-Series device or it’s accessories are mechanically damaged, do not to use them.

If the battery are not charged or the Tobii Dynavox I-Series is not connected to the power supply, the

Tobii Dynavox I-Series device will shut down.

If the Power Supply Cord is damaged it needs to be replaced by Service Personnel only. Do not use the Power Sup-

ply Cord until replaced.

Only connect the Tobii Dynavox I-Series to the Power adapters shipped with this device.

The appliance coupler of the power supply is used as the Mains Disconnection Device, please do not position the

Tobii Dynavox I-Series device so that it is difficult to operate the disconnection device.

Special regulations apply to shipping devices containing Li-ion Polymer batteries. If dropped, crushed, or short-

circuited, these batteries can release dangerous amounts of heat and may ignite, and are dangerous in fires.

Please reference IATA regulations when shipping lithium metal or lithium ion batteries or cells: http://www.iata.org/

whatwedo/cargo/dangerous_goods/Pages/lithium_batteries.aspx

The Power adapters shall not be used without an adult or Caregiver supervision.

2.4 Mounting

The Tobii Dynavox I-Series should be mounted according to MANUFACTURER instructions of approved mounts.

Tobii Dynavox or its agents are not liable for damage or injuries to a person or its property due to a

Tobii Dynavox I-Series falling from a mounted configuration. The mounting of a Tobii Dynavox I-Series is done entirely

at the user’s own risk.

2 Safety

Tobii Dynavox I-Series User’s manual v.1.0 - en-US