User's Manual

5 Using the Tobii Dynavox I-Series

No skill other then reading is necessary for setting up the Tobii Dynavox I-Series device. Follow this User´s Manual and the

Quick Start Manual.

5.1 Starting the Device

Press the power button on the top of the device. (Position 1 in Figure 3.1 Tobii Dynavox I-Series Tablet, page 13) to start the

Tobii Dynavox I-Series.

5.1.1 First Start Up

When you start your Tobii Dynavox I-Series for the first time, you are required to go through a couple steps to set your I-Series

up with the correct software and language installation. The whole process usually takes between 10-15 minutes.

Immediately after booting up the I-Series, you will be taken through the Windows Out-of-box experience (OOBE). It will require

you to acknowledge both Microsoft and Tobii Dynavox End User License Agreement. This is also where you set up language

and time-zone preferences. You will also be able to connect to a WIFI-network. Simply follow the instructions on screen to

progress to the next step.

Internet-connectivity is not a requirement.

Once completing the above steps, a Tobii Dynavox setup guide will launch. The setup guide will ask you for a QR-code that de-

fines what Tobii Dynavox software is to be installed. The QR-code is supplied on paper with your device, and the setup guide

will let you use the built-in rear camera to scan it. Alternatively, you can also manually enter the license code, found on the same

paper as the QR-code. Once the QR-code/license number is successfully read, the system will spend approximately 5-10 mi-

nutes configuring your Tobii Dynavox Communication software. In the meantime, you will be asked to acknowledge safety infor-

mation and manage device settings. Once your software is configured and ready to go, you will be automatically notified.

5.1.2 Password Information

The Tobii Dynavox I-Series device is configured to start up without a password. Though unusual, there are situations in which

the password window could pop up; for example, when creating a new user in the operating system, when returning from the

operating system’s sleep mode or when downloading software updates from the internet.

If you decide to use a password for your user account on your Tobii Dynavox I-Series device, be sure to write it down

in a safe place for later use. Without the operating system’s access password, Tobii Dynavox Support may be unable

to assist you until you have recovered it through Microsoft.

The password is case sensitive.

Should the password window pop up, requiring a password, you need to know the password or where to find it. In order to type

in the password use the Windows On-Screen Keyboard or an external USB keyboard (not included).

5.1.3 The Discover Tobii Dynavox app

Every Tobii Dynavox I-Series comes with the Discover Tobii Dynavox app pre-installed. Discover Tobii Dynavox is a resource for

users and caregivers providing useful information and tips about your device and installed software, such as implementation

guides, support information and instructional videos. The Discover Tobii Dynavox app is continuously maintained with up to date

information and links.

The Discover Tobii Dynavox will open some content in a new web browser window.

5.2 Shutting Down the Tobii Dynavox I-Series

The device should be shut down using the following:

5 Using the Tobii Dynavox I-Series

Tobii Dynavox I-Series User’s manual v.1.0 - en-US