User's Manual
29
Tobii C-Series User’s Manual
Using the Touch Screen software calibration:
1. For Windows Vista: Go to Start menu > All Programs >
TouchKit > Congure Utility.
For Windows 7: Go to Start menu > All Programs >
eGalaxTouch> Congure Utility.
2. Select the Tools tab.
3. Click on 4 Points Calibration to start the calibration of the
touch screen. The screen will turn white and display an active red
target in the bottom left corner with a progress bar beside it.
4. Touch and hold the target before the 15 seconds is up, it will turn
yellow. Continue holding until the timer clock has counted up to
100%. The target will then move to the next corner, anticlockwise/
counterclockwise.
Chapter 5 Using the Tobii C-Series