User's Manual
29
Tobii C-Series User’s Manual
Using the Touch Screen software calibration:
1. Go to Start menu > All Programs > TouchKit > Congure
Utility.
2. Select the Tools tab.
3. Click on 4 Points Calibration to start the calibration of the
touch screen. The screen will turn white and display an active red
target in the bottom left corner with a 15 second timer beside it.
4. Touch and hold the target before the 15 seconds is up, it will turn
blue. Continue holding until the timer clock has counted up to
100%. The target will then move to the next corner, anticlockwise/
counterclockwise.
Chapter 5 Using the Tobii C-Series