Specification Sheet

3
SNAPTOGGLE
®
HEAVY
-DUTY HOLLOW
-
WALL ANCHORS
Applications
Benefits
• Cinder block
• Concrete block
• Gypsum board
• Drywall
• Tile over drywall
• Plasterboard
• Composite panels
• Cement board
• Greenboard
• Plaster
• Stucco
• Fiberglass
• Plywood
• Steel plate
• Plastic
• Wood studs / beams
• Flat panel TV’s
• TV mounts
• Lighting fixtures
• Window treatments
• Marine applications
• Hand rails
• Grab bars
• ADA hardware
• Office furniture
• Heavy machinery
• Partitions
• Cabinets
• Shelving
• Solar panels
• Garage doors
• Sinks
• Heavy fans
• DSS antennas
• Reinstallations
• Roofs & decking
For maximum holding in
• Strong—up to
2x the load of an old-fashioned wing toggle
• Solid metal channel resists vibration and shock
° bolt is centered in channel and positioned for precise installation
° bolt threads never touch interior surface of hole and so can’t saw through substrate
• Save time—at least
6 minutes per anchor versus wing toggles
• Can use a screw gun—anchor does not spin
• Save money—turn a 2-person job into a 1-person job
• Use a shorter bolt—no need to carrry a wing through the wall
• New, patented strap design with sturdier straps and smaller ratchet interval:
° adjusts more precisely and snaps off
flush to wall, ceiling, or floor
° does not break prematurely
° pushes aside insulation
•
Smallest installation hole for each bolt size—
° maintains integrity of wall, ceiling, or floor, strengthening the anchoring
° ends the need to patch an oversized hole
[a 1/4" wing toggle requires a 3/4" diameter hole:
50% larger than the 1/2" diameter hole
used by the 1/4” SNAPTOGGLE anchor]
• New plating is 7x more corrosion-resistant than B633-85 Type III/SC 1 government spec high
quality zinc plating [350 hours to red rust in salt spray test versus only 48 hours for government spec]
• Pre-installs without the bolt to make handling of fixture easier
• Reusable in the same hole—remove the bolt without losing the anchor
• New ergonomic design—fingers grip straps more naturally and more easily with
no slipping
TOGGLER and typeface, logo symbol, and SNAPTOGGLE are worldwide registered trademarks of Mechanical Plastics Corp. BA, BB, BC, BD, BE, BAL, BBL, BAS, BBS, BCS, BDS, BES, BALS, BBLS,
BM5, BM6, BM8, BM10, BM5L, BM6L, BM5S, BM6S, BM8S, BM10S, BM5LS, and BM6LS are worldwide trademarks of Mechanical Plastics Corp. U.S. Patent no. 6,161,999 and foreign counterparts
thereof. Other patents pending. © 2008, 2010, 2012 Mechanical Plastics Corp. SNAPTECH0412
TOGGLER Anchor System 888.864.4537 Toll-Free
Div. of Mechanical Plastics Corp. 203.857.2200 Phone
110 Richards Avenue 203.857.2201 Fax
Norwalk, CT 06854 [e-mail]
USA www.toggler.com