User Manual

1
How to Anchor Heavy Loads in Hollow Materials
What we tell you...
•
TOGGLER
®
BRAND
toggle bolts pre-install without
the bolt (prior to mounting the fixture).
•
Use a screw gun for fast, easy installation.They
do not spin in the wall.
•
Increased grip range now 3/8” - 3 5/8” (9-95mm).
•
Use a shorter bolt, because the bolt does not
have to carry the anchor through the wall.
•
New golden plating resists corrosion much longer.
What we tell you...
•
Our toggle bolts have a solid metal channel that
distributes the load over its entire length.
•
TOGGLER BRAND toggle bolts require a smaller
hole than the old-fashioned spring-wing toggle.
•
New patented, ergonomic strap design with
smaller ratchet interval prevents premature
breakage and guarantees flush fit to wall.
What this means to you...
•
TOGGLER
BRAND toggle bolts do NOT fall
behind the wall when the bolt is removed!
•
Save 3 to 10 minutes with each toggle bolt
installed. This reduces labor cost enough to pay
for the anchor many times over.
•
Shorter bolt is less expensive and takes less time
to install. Allows one-person installation, not two.
•
7x longer than government standard zinc plating.
What this means to you...
•
The highest strength design available — over 2x
stronger than toggle wings the same bolt size.
•
TOGGLER BRAND toggle bolts leave more of the
wall intact, resulting in
•
increased holding power, and
•
neater, quicker, lower-cost installation.
•
Reliable installation eliminates callbacks & rework.
TOGGLER
®
BRAND
SNAPTOGGLE
®
Toggle Bolts — new and improved!
Smaller hole is easier and cheaper to drill !
Smaller hole leaves more of the wall intact for
better holding power !
1/4" spring-wing toggle
requires 50% larger hole
1/2" hole
TOGGLER BRAND
3/4" hole
Spring-wing toggle
Shorter
bolt
Load distribution
over entire solid channel
Super Holding
Power with Solid
Metal Channel