Technical Specifications

ManualsBrandsTOGGLER ManualsAnchors#6-12 x 1-3/16" Plastic Expansion Wall Anchor - 6 Count

Heavy-duty anchoring in concrete & brick ... even in tile!

• Strongest—holds up to

2x more

than metal, adhesive,

epoxy, and chemical anchors*

• Anchor

bonds screw

to concrete, brick & stone—

sealing the hole [prevents moisture from entering hole]

• Sets instantly • Non-toxic • Rustproof • No-shelf life worry

• Resists

vibration & shock

both

solid & hollow walls

• Can use a screw gun—anti-rotation fins

prevent spinning

• Greatest

screw range

for each anchor:

[see Specifications chart below]

•

More versatile

than metal or chemical anchors—

holds securely even in hollow walls / ceilings

Ultimate Load in Pounds

Ideal for Mounting:

For Maximum Holding in:

Flanged

for hollow brick, drywall,

or tile over drywall, etc.

Flush-mount

for through-the-fixture /

push-through installation

Benefits:

1233a

Anchor & drill dia.:

3/16" 1/4" 5/16" 3/8"

Anchor:

A5/AF5 A6/AF6 A8/AF8 A10

Tensile

4000 psi Concrete 2,316 2,633 3,083 4,270

1/2" Drywall 57 69 85 N/A

Shear

1/2" Drywall 125 153 171 N/A

• Concrete

• Brick

• Stone

• Masonry

• Cinder block

• Aerated concrete

• Wood

• Stucco

• Plaster

• Tile

• Drywall

• Greenboard

• RTA furniture

• Foam insulated panels

• Electrical equipment

• Lighting fixtures

• Plumbing fixtures

• Partitions

• Hand rails & grab bars

• Telephone equipment

• Shelving

• Cabinets

• Awnings

• Circuit breakers

• Framing

• Alarms

• Signs

• DSS antennas

• Fire extinguishers

• Window frames

• Door jambs

• Transformers

• Storefront gates

• Smoke detectors

www.toggler.com 1-888-TOGGLER (1-888-864-4537)

Drill hole same diameter as anchor.

Push in anchor and tap flush.

Place item over anchor, insert

screw and tighten flush with item.

Anti-rotation fins prevent spinning

while the ALLIGATOR anchor

expands along the screw in solid

walls ... up to

2x its original length.

In unexpected cavities or in hollow

walls (hollow brick, hollow block,

tile over drywall, etc.), the screw

opens the anchor and its thread

locks into the anchor’s teeth.

A5 3/16" dia.

(Ø5mm)

AF5

A6 1/4" dia.

(Ø6mm)

AF6

A8 5/16"dia.

(Ø8mm)

AF8

A10 3/8" dia.

(Ø10mm)

TBS1 TBS2TH TBW

Hook

Anchor

TBS1

Shelving

Anchor

TBS2

Pegboard

Anchor

TBW

Wire Shelf

Anchor

with locking retainer clip

www.toggler.com 1-888-TOGGLER (1-888-864-4537)

Built-in spacer

prevents the

anchor from being jacked out of

the wall during installation.

Also useful installing equipment

on warm or wet walls when

ventilation

is needed behind the

installed object.

Specially designed

built-in hook

holds the weight of the picture on

the screw—

not below it. This

provides maximum holding and

prevents pull-out

Ideal for hanging paintings, prints,

mirrors, and

anything framed

Built-in spacer

holds the pegboard

the proper distance from the wall to

allow peg hooks to work.

This eliminates the need for furring

strips,

saving time & money

, and

allows

full use

of the pegboard

space.

ALL BRAND

anchors are proudly made

in the USA

All

TOGGLER specialty anchors hold securely, even if you hit a solid area, like a

stud

... or in

concrete, brick & stone

Includes a

locking retainer clip

shelves

don’t tip

, even when the

load they support is distributed

unevenly or near the edge. Ideal for

use with systems like

Closet

Maid

Perfect for closet systems & kitchen,

garage or workshop shelves.

* with the same screw diameter and embedment depth

Satisfaction Guaranteed

TOGGLER Anchor System is proud of its unique, patented

anchors, but if they fail to perform to your satisfaction,

please send the sales receipt together with any unused anchors

for a full refund. Your comments would be appreciated.

This guarantee is not to be construed as conferring any liability

beyond the purchase price of the product.

Industry safety standards recommend

1/4 of ultimate test load.

See MPC

technical bulletins for full results of tests

and for safety factors that should be

applied when evaluating an application ...

also for proper screw sizes and lengths.

All pull-out values are from independent

laboratory tests done according to U.S.

Government standards. They should be

used as guides only. The age, condition,

and capacity of the substrate must be

considered.

Holding strength for a TOGGLER BRAND

anchor varies directly with the strength of

the wall material, the screw size & the

extent of the screw engagement—and

inversely with variations in hole diameter

and the distance of the load from the wall.

TOGGLER anchors are patented under one or more of U.S. Patent Nos. 4,993,901; 5,028,186; 5,161,296; 5,938,385; 6,161,999; 7,144,212; and foreign counterparts thereof and of 4,650,386; 4,673,150; 4,752,170; and 4,878,790.

Other patents pending. TOGGLER and typeface, logo symbol, TA, TB, TC, TH, SNAPTOGGLE, SnapSkru, and ALLIGATOR are worldwide registered trademarks of Mechanical Plastics Corp.

Closet

Maid is a registered trademark of

Closet

Maid, a division of Emerson

Specialty Anchors

Hang wall decor quickly,

easlly & securely

No more fumbling with

shelving standards

Give peg hooks the

space they need

Installing wire shelving

securely is a snap

TBS1 TBS2TH TBW

www.toggler.com

Installation videos & technical bulletins

MECHANICAL PLASTICS CORP.

P.O. Box 554 • 444 Saw Mill River Road

Elmsford, NY 10523 USA

1-888-TOGGLER [1-888-864-4537]

Fax: (914-347-3634) Tel: (914)347-2727

Email:

info@toggler.com

Specifications:

UNC

Anchor:

A5/AF5 A6/AF6 A8/AF8 A10

Anchor & drill diameter:

3/16" 1/4" 5/16" 3/8"

Screw sizes:

#4 - #10 #6 - #14 #8 - 5/16" #10 - 3/8"

Minimum hole depth:

Metric

Anchor & drill diameter:

5mm 6mm 8mm 10mm

Screw sizes:

Ø3 - 5mm Ø3.5 - 6mm Ø4 - 8mm Ø4.5 -10mm

Minimum hole depth:

40mm 45mm 50mm 65mm

Lighting fixtures,

Plumbing fixtures,

Partitions, Grab bars,

Shelving, Cabinets...

HEAVY

Duty

Alarms, Thermostats,

Smoke detectors...

LIGHT

Duty

Large TV’s, Mirrors,

Bookshelves, Sinks,

Cabinets...

Bathroom accessories,

Window treatments,

Speaker mounts...

Small lighting fixtures,

Picture frames...

Alarms, Thermostats,

Smoke detectors...

HEAVY

Duty

MEDIUM

Duty

MEDIUM

- LIGHT

Duty

High-Performance

™

Anchors

Fast, easy & secure anchoring

ALL

building materials

www.toggler.com 1-888-TOGGLER (1-888-864-4537)

Hollow Materials

Drywall, Plaster, Block...

Solid Materials

Concrete, Brick, Stone...

SNAPTOGGLE

Toggle Bolts

ALLIGATOR

Solid-Wall Anchors

TOGGLER

Plastic Toggle Anchors

SnapSkru

Regular

Self-Drilling Drywall Anchors

SnapSkru

MINI

Self-Drilling Drywall Anchors

Locks

on wall!

pop!

Locks

on wall!

Anchor expands up to

2x its length, bonding

screw to the wall!

Anchor expands up to

2x its length, bonding

screw to the wall!

pop!

LIGHT

Duty

Picture

Hook

Wire

Shelf

Shelving

Pegboard

In All Walls ... Hollow and

Solid ... Drywall to Concrete

TOGGLER

Anchors

for Special Projects

Simplify specialized installations!

ALLIGATOR

Solid-Wall Anchors

MPC_Catalog_2007_Rev6.QX6 10/18/07 1:54 PM Page 4

Summary of content (5 pages)

PAGE 1
MPC_Catalog_2007_Rev6.QX6 10/18/07 1:54 PM Page 4 ® ® ® ALLIGATOR Solid-Wall Anchors Heavy-duty anchoring in concrete & brick ...
PAGE 2
ANCHOR SYSTEM Technical Bulletin ALLIGATOR® SOLID-WALL ANCHORS Benefits: The latest generation of the ever-evolving TOGGLER solid-wall anchor technology... • Strongest—holds up to 2x more than metal, adhesive, epoxy and chemical anchors with the same screw diameter and embedment depth ALLIGATOR anchors are designed to hold high loads in solid walls, ceilings, and floors ...
PAGE 3
ALLIGATOR® SOLID-WALL ANCHORS Specifications Description — ALLIGATOR Solid-Wall Anchors Material — specially formulated grade of self-lubricating, translucent polypropylene Screw specification — see chart below [NOTE: only the threaded portion of the screw should be in the anchor itself; any unthreaded shank portion of the screw may be in the fixture or item being anchored, but not in the anchor] D AL HD Ø Flush-Mount Flanged For through-the-fixture / push-through installation For hollow brick,dryw
PAGE 4
ALLIGATOR® SOLID-WALL ANCHORS Safety • All TOGGLER anchors are constructed completely out of inert materials. • OSHA standard 29 CFR 1910.1200 and DOT standards are not applicable. • No MSDS is required for any TOGGLER anchor. Installation Instructions • The ALLIGATOR anchor is supplied in the closed position, ready for rapid and immediate utilization. • The screw used to fasten the item also opens & sets the anchor in place: in both solid & hollow (cavity) walls.
PAGE 5
ALLIGATOR® SOLID-WALL ANCHORS The Unique Way the ALLIGATOR anchor works The ALLIGATOR anchor has several features that dramatically increase its holding strength in solid and thick walls as compared to other solid-wall anchors. The anchor has a circular cross-section and is completely solid.