Information Sheet

ManualsBrandsToggler ManualsAnchorsSleeve Anchor (5/16 x 2-1/4" / Box of 100)

Sleeve-TITE

™

Sleeve Anchors

1-203-857-2200 • www.wejit.com Page 1 of 6

6-dimple

expansion sleeve

Description

The Sleeve-TITE

™

sleeve anchor is a high-strength

pre-assembled expansion anchor designed for anchoring

into concrete, masonry, and brick. The Sleeve-TITE anchor

has a 6-dimple expansion sleeve over a threaded stud bolt

which provides superior performance in all conditions. These

anchors are available in a number of head styles for a wide

array of applications.

Key Features & Benets

 Pre-assembled with nut and washer for

immediate installation

– Eliminates the problem of missing components

 Anchor size = Drill bit size

 Can be used for solid and hollow concrete and

masonry applications

 New 6-dimple expansion sleeve allows the anchor to

grip imperfections in the base material

 One-piece sleeve design allows stress to be distributed

over the entire contact area

 Available in a variety of lengths and diameters

 Available in a variety of head styles:

– Acorn Nut

– Hex Bolt

– Hex Nut

– Phillips Flat Head

– Rod Coupling

– Tie Wire

 Available in zinc-plated carbon steel and

Type 304 stainless steel

Specications, Listings

and Approvals

Diameters: 1/4" – 3/4"

Carbon Steel Anchor Materials:

Body:

1/4 through 5/16: C1035

3/8 through 3/4: C1010/ C1018

Expansion Sleeve:

All sizes: C1010/C1018

Washer:

All sizes: C1010/C1018

Finish: Zinc plating

Meets ASTM B633, SC1 Type III with

clear chromate, SC1 class mild

Stainless Steel Anchor Material:

All components:

ASTM F593 Group 1 Type 304

Federal Specications:

– QQZ-325C, Type II, Class 3 (clear

chromate added)

– GSA FFS-325, Group II, Type 3, Class 3

Available Nut and Head Styles

Acorn NutHex Nut Hex Bolt

Flat Rod Coupling Tie Wire

Applications

 Shelving

 Cable Trays

 Sill Plates

 Door Frames

 Window Frames

 Railing

USA

ENGINEERED

Summary of content (6 pages)

PAGE 1
Sleeve-TITE™ Sleeve Anchors Description The Sleeve-TITE™ sleeve anchor is a high-strength pre‑assembled expansion anchor designed for anchoring into concrete, masonry, and brick. The Sleeve-TITE anchor has a 6-dimple expansion sleeve over a threaded stud bolt which provides superior performance in all conditions. These anchors are available in a number of head styles for a wide array of applications.
PAGE 2
Sleeve-TITE™ Sleeve Anchors Installation Information Instructions 1. Drill the hole perpendicular to the work surface. To assure full holding power, do not ream the hole or allow the drill to wobble. Drill the hole at least 1 anchor diameter deeper than the calculated embedment depth, but not closer than two anchor diameters to the bottom surface of the concrete. Through drilling is allowed when using sleeve anchors in hollow concrete block. 1 2 2. Clean the hole using compressed air and a nylon brush.
PAGE 3
Sleeve-TITE™ Sleeve Anchors Performance Data Ultimate and Allowable Loads (lbs.) – Normal-Weight Concrete/Aggregate/Stone Anchor Drill Head Dia. Dia. Style (in.) (in.) Bolt Size (in.) Install. Embed. Torque 2,000 psi (in.) (ft-lb) Tens.
PAGE 4
Sleeve-TITE™ Sleeve Anchors Load Adjustment Factors Load Adjustment Factors – Spacing* Anchor Diameter Embedment hnom 1/4 1-1/8 5/16 1-7/16 3/8 1-1/2 Critical Spacing Scr 3-3/8 4-5/16 4-1/2 Minimum Spacing Smin 1-11/16 2-3/16 2-1/4 Actual Spacing Sact 1/2 2-1/4 5/8 2-3/4 3/4 3-3/8 6-3/4 8-1/4 10-1/8 3-3/8 4-1/8 5-1/16 1-11/16 0.50 – – – – – 2-3/16 0.65 0.50 – – – – 2-1/4 0.67 0.52 0.50 – – – 3-3/8 1.00 0.78 0.75 0.50 – – 4-1/8 – 0.96 0.92 0.61 0.
PAGE 5
Sleeve-TITE™ Sleeve Anchors Order Information Acorn Nut: Zinc-Plated Carbon Steel Catalog No. ASA1413 ASA1421 Anchor Drill Bit Min. Box Carton Size Dia. Embed. Quantity Quantity (in.) (in.) (in.) 1/4 x 1-3/8 1/4 1-1/8 100 1000 1/4 x 2-1/4 1/4 1-1/8 100 800 Hex Nut: Zinc-Plated Carbon Steel Catalog No. HSA5612 HSA5622 HSA3813 HSA3830 HSA3840 HSA1221 HSA1230 HSA1240 HSA1260 HSA5821 HSA5830 HSA5841 HSA5860 HSA3422 HSA3440 HSA3461 Anchor Drill Bit Min. Box Carton Size Dia. Embed. Quantity Quantity (in.
PAGE 6
Sleeve-TITE™ Sleeve Anchors Flat Head: Type 304 Stainless Steel Acorn Nut: Type 304 Stainless Steel Catalog No. ASAX1413 ASAX1421 Anchor Drill Bit Min. Box Carton Size Dia. Embed. Quantity Quantity (in.) (in.) (in.) 1/4 x 1-3/8 1/4 1-1/8 100 1000 1/4 x 2-1/4 1/4 1-1/8 100 800 Catalog No. FSAX1420 FSAX1430 FSAX3830 FSAX3840 FSAX3850 FSAX3860 Anchor Size (in.) 1/4 x 2 1/4 x 3 3/8 x 3 3/8 x 4 3/8 x 5 3/8 x 6 Drill Bit Min. Box Carton Dia. Embed. Quantity Quantity (in.) (in.