User's Manual

3
1. Outline
The FM Remote Signal Torque Wrench integrates a wireless signal
generator that counts down the number of bolts or nuts after tightened.
The signal transmitter can be installed onto TOHNICHI torque wrenches,
such as Models QSP, CSP, PQL, PCL, SP, RSP, etc.
It is easy to set the required channel on customer side. 96 channels are
available for the Receiver and 16 channels for the Transmitter.
The receiver can be connected to the CNA-4mk2 Count Checker to
provide complete tightening assurance system to eliminate missed
tightening.
2. Features
This Remote Signal Type torque wrench sends the tightening completion
signal to the Receiver far from the wrench through FM-wave. Tone
frequency of FM-wave can be easily set. This feature reduces the number
of the Remote Signal torque wrenches for spare and a few torque
wrenches enable the more tightening control applications.
3. Construction
Receiver R-FM96D 1 Set
Antenna 1 Set
Transmitter Torque Wrench+F-FM96MCU 1 Set
(Battery Incorporated)
Instruction manual 1 Set