User's Manual

4
4. Specification
Table 1
 FM96MCU Specification
Transmitter Receiver
Model F-FM96MCU R-FM96D
Frequency Band
41MHz Band
(41.025~41.300MHz、25kHz Space、12 Types)
Wave Type FM (F3E)
Channel Change
(by DIP Switch)
Radio Frequency (Fixed) 1ch
Tone Frequency 16 Channels Selection
Radio Frequency
A series: 6 Channels Selection
B series: 6 Channels Selection
Tone Frequency
A, B series: 6 Channels Selection
Channel ／Unit
16ch 96ch
Total Channel 192ch
Identification Signal Dual Tone System
Signal Output
No-Voltage Contact Output(1a)
DC30V 1A, AC125V 0.3A
Power DC1.5V R3 (Alkaline Battery)
AC100〜115V± 10%
Antenna Wire
1/4λ whip
Operating Temperature
Range
0~40℃
LED Lamp Operating Check Lamp Power, Receiving Lamp
Check Function
Battery Check Terminal
Transmitting
Dimension
18.2× 36× 68(H× W× D) 51× 150× 210(H× W× D)
Note 1 : A series frequency of the Receiver is not compatible with B series
frequency of the Receiver.
Note 2 : Refer to the bale 3, 4 & 5 for the combination for radio frequency
and tone frequency.