User's Manual

7
7. Precaution
1 Power Supply
Use 100〜115VAC± 10％(50/60Hz)power source for the Receiver.
Use the constant-voltage transformer where the power supply is not
constant.
Always use LR03 Alkaline battery for the Transmitter.
2. Placing FM Receiver
Avoid placing the antenna near the steel columns or other metal pipes,
which will affect the receiving condition.
Press the Transmission check Button, then confirm that operation
check LED for Transmission turns on and the “SIGNAL” lamp for
Receiver turns on.
3. Connection with Other Apparatus.
Verify that both the Receiver and the equipment are turned off.
Connect the equipment to the output terminal of the Receiver with a
two-core shielded wire.
(Connect a separate shielded wire to the GND terminal.)
First, turn on the Receiver, and then the equipment.