User Manual
Table Of Contents
- TTM-200ｼﾘｰｽﾞﾕｰｻﾞｰｽﾞﾏﾆｭｱﾙ 英語 48-7009-Ｄ.pdfから挿入したしおり
- TOP
- Contents
- 2. Installation
- 3. Wiring
- 4. Basic operation
- 5. Operating the equipment
- 5.1 Precautions on operating the equipment
- 5.2 Operating monitor display
- 5.3 How to set run settings
- 5.4 How to set each function and description of function
- 5.5 Explanation of the program run function
- 5.5.1 Operation flow of the program run
- 5.5.2 SET 21 program function setting
- 5.5.3 SET 21 program function setting screen
- 5.5.4 SET 22 program setting
- 5.5.5 SET 22 program setting screen
- 5.5.6 Explanation of the screen display and operation of a program run
- 5.5.7 Complementary explanation of the program run
- 5.6 Explanation of the bank automatic switching function
- 6. Explanation on parameters
- 6.1 Input 1 type setting
- 6.2 Remote SV input type setting
- 6.3 Function key function setting
- 6.4 Control function setting
- 6.5 Output (from OUT 1 to OUT 7) type setting
- 6.6 Current transformer (CT) setting
- 6.7 DI setting
- 6.8 Timer function setting
- 6.9 Communication function setting
- 6.10 Initial setting
- 6.11 Priority screen setting
- 6.12 Bank function setting
- 6.13 PROGRAM FUNCTION SETTING
- 6.14 PROGRAM SETTING
- 6.15 BANK AUTOMATIC SWITCHING FUNCTION SETTING
- 7. Appendix
- 7.1 Product specifications
- 7.2 Accessories
- 7.3 Error (abnormality) display
- 7.4 Troubleshooting
- 7.5 Setting list
- 7.5.1 Run mode
- 7.5.2 Input 1 setting mode (SET 01)
- 7.5.3 Input 2 setting mode (SET 02)
- 7.5.4 Key function setting mode (SET 03)
- 7.5.5 Control setting mode (SET 04) (1/4)
- 7.5.6 OUT 1 and 2 setting modes (SET 05 and 06) (1/3)
- 7.5.7 OUT 3 to 7 setting modes (SET 07, 08, 09, 10 and 11) (1/2)
- 7.5.8 CT setting mode (SET 12)
- 7.5.9 DI setting mode (SET 13)
- 7.5.10 Timer 1 to 3 setting modes (SET 14, 15 and 16)
- 7.5.11 Communication setting mode (SET 17)
- 7.5.12 Initial setting mode (SET 18)
- 7.5.13 Priority screen setting mode (SET 19)
- 7.5.14 Bank setting mode (SET 20)
- 7.5.15 Program function setting mode (SET 21)
- 7.5.16 Program setting mode (SET 22)
- 7.5.17 Bank automatic switching function setting mode (SET 23)
48-7009-E 6-12
6.3 Function key function setting
■ Function settings for function keys 1 to 5
SEt03
KEY
Setting content
Initial value
1 to 5
FU1 to FU5
Press the MODE key for making a setting effective.
00
Function settings
*0
No function
*1
Digit shift
*2
Follow the Set21 C/P Operatioin Type Setting
＜Constant Operation Mode＞
Control Mode (MD) / Control Stop (RdY)
＜Program Mode＞ 3
Program Start / Stop
*3
AT start/AT stop
*4
Timer start/reset
*5
Screen reverse feed
*6
ENT
*7
Bank switchover
*8
Control mode/manual
*9
SV/MV Display Switchover 3
*A
Constant Operation Mode / Program Mode switchover 3
*b
Step Forward 3
*C
Pause 3
*d
＜For Program Operation Mode Only＞ 3
SET 22 Call-out Function (SET 22 Short-cut)
Pressing time setting
0*
None
1*
Pressing time 1 second
2*
Pressing time 2 seconds
3*
Pressing time 3 seconds
4*
Pressing time 4 seconds
5*
Pressing time 5 seconds
Set functions for the function keys 1 to 5
(1) Digit shift
The digit shifts each time when the FUNC key is pressed: 1 10 100 1000 1.
Thereby, changes of setting values can be executed with ease.
(2) Control mode/control stop
Pressing the FUNC key results in changing the modes from control mode to control stop or vice versa.
(3) AT start/AT stop
The FUNC key is set to the auto-tuning start/stop key during the PID control.
(4) Timer start/reset
The FUNC key is set to the start/reset key when the timers 1 - 3 setting mode is set for manual start, as well as to the restart/reset
key when a timer operation is once terminated.
(5) Screen reverse feed
Press the FUNC key when feeding a screen back to the one desired to display when it is passed beyond. (Reverse feed)
Note Take care that the reverse feed of SET 18 is not possible.