User Manual
Table Of Contents
- TTM-200シリーズユーザーズマニュアル 英語 48-7009-D.pdfから挿入したしおり
- TOP
- Contents
- 2. Installation
- 3. Wiring
- 4. Basic operation
- 5. Operating the equipment
- 5.1 Precautions on operating the equipment
- 5.2 Operating monitor display
- 5.3 How to set run settings
- 5.4 How to set each function and description of function
- 5.5 Explanation of the program run function
- 5.5.1 Operation flow of the program run
- 5.5.2 SET 21 program function setting
- 5.5.3 SET 21 program function setting screen
- 5.5.4 SET 22 program setting
- 5.5.5 SET 22 program setting screen
- 5.5.6 Explanation of the screen display and operation of a program run
- 5.5.7 Complementary explanation of the program run
- 5.6 Explanation of the bank automatic switching function
- 6. Explanation on parameters
- 6.1 Input 1 type setting
- 6.2 Remote SV input type setting
- 6.3 Function key function setting
- 6.4 Control function setting
- 6.5 Output (from OUT 1 to OUT 7) type setting
- 6.6 Current transformer (CT) setting
- 6.7 DI setting
- 6.8 Timer function setting
- 6.9 Communication function setting
- 6.10 Initial setting
- 6.11 Priority screen setting
- 6.12 Bank function setting
- 6.13 PROGRAM FUNCTION SETTING
- 6.14 PROGRAM SETTING
- 6.15 BANK AUTOMATIC SWITCHING FUNCTION SETTING
- 7. Appendix
- 7.1 Product specifications
- 7.2 Accessories
- 7.3 Error (abnormality) display
- 7.4 Troubleshooting
- 7.5 Setting list
- 7.5.1 Run mode
- 7.5.2 Input 1 setting mode (SET 01)
- 7.5.3 Input 2 setting mode (SET 02)
- 7.5.4 Key function setting mode (SET 03)
- 7.5.5 Control setting mode (SET 04) (1/4)
- 7.5.6 OUT 1 and 2 setting modes (SET 05 and 06) (1/3)
- 7.5.7 OUT 3 to 7 setting modes (SET 07, 08, 09, 10 and 11) (1/2)
- 7.5.8 CT setting mode (SET 12)
- 7.5.9 DI setting mode (SET 13)
- 7.5.10 Timer 1 to 3 setting modes (SET 14, 15 and 16)
- 7.5.11 Communication setting mode (SET 17)
- 7.5.12 Initial setting mode (SET 18)
- 7.5.13 Priority screen setting mode (SET 19)
- 7.5.14 Bank setting mode (SET 20)
- 7.5.15 Program function setting mode (SET 21)
- 7.5.16 Program setting mode (SET 22)
- 7.5.17 Bank automatic switching function setting mode (SET 23)
48-7009-E 7-4
(2) Control output section
1) No. of output points
2 points
2) Output type (fixed per model designation)
① Relay contact output
a) Contact type 1a contact
b) Contact capacity 250 VAC, 3A (resistance loads)
c) Min. loads 5 VDC, 100 mA
d) Mechanical life 5 million counts or more
e) Electric life 100 thousand counts or more
(More than 80 thousand counts at the UL approval)
f) Isolation Isolated from power circuit and CPU circuit
② Voltage output for SSR drive
a) Output type ON/OFF
b) Output voltage 12 VDC
c) Output voltage accuracy ±1 V (23 ± 10 °C)
d) Load resistance 600 or larger
e) Leak current 21 μA or smaller (at output off)
f) Isolation Isolated from power circuit and CPU circuit
③ Open collector output
a) Output type Open collector
b) Output rating 24 VDC, 100 mA
c) Leak current 0.3 mA or smaller (at output tuned off)
d) Residual voltage 3 V or smaller (at output tuned on)
e) Isolation Isolated from power circuit and CPU circuit
④ Voltage 0 - 1 VDC output
a) Output type Continuous
b) Output accuracy ±0.3 % (23 ± 10 °C)
c) Output resolution Better than display resolution
d) Load resistance 500 k or larger
e) Isolation Isolated from power circuit and CPU circuit
⑤ Voltage 0 - 5 VDC output
a) Output type Continuous
b) Output accuracy ±0.3 % (23 ± 10 °C)
c) Output resolution Better than display resolution
d) Load resistance 1 k or larger
e) Isolation Isolated from power circuit and CPU circuit
⑥ Voltage 1 - 5 VDC output
a) Output type Continuous
b) Output accuracy ±0.3 % (23 ± 10 °C)
c) Output resolution Better than display resolution
d) Load resistance 1 k or larger
e) Isolation Isolated from power circuit and CPU circuit
⑦ Voltage 0 - 10 VDC output
a) Output type Continuous
b) Output accuracy ±0.3 % (23 ± 10 °C)
c) Output resolution Better than display resolution
d) Load resistance 1 k or larger
e) Isolation Isolated from power circuit and CPU circuit
⑧ Voltage 0 - 10 mVDC output
a) Output type Continuous
b) Output accuracy ±0.3 % (23 ± 10 °C)
c) Output resolution Better than display resolution
d) Load resistance 500 k or larger
e) Isolation Isolated from power circuit and CPU circuit
⑨ Voltage 4 - 20 mADC output
a) Output type Continuous
b) Output accuracy ±0.3 % (23 ± 10 °C)
c) Output resolution Better than display resolution
d) Load resistance 600 k or smaller
e) Isolation Isolated from power circuit and CPU circuit
3) Connection method
Terminal block










