User Manual
Table Of Contents
- TTM-200ｼﾘｰｽﾞﾕｰｻﾞｰｽﾞﾏﾆｭｱﾙ 英語 48-7009-Ｄ.pdfから挿入したしおり
- TOP
- Contents
- 2. Installation
- 3. Wiring
- 4. Basic operation
- 5. Operating the equipment
- 5.1 Precautions on operating the equipment
- 5.2 Operating monitor display
- 5.3 How to set run settings
- 5.4 How to set each function and description of function
- 5.5 Explanation of the program run function
- 5.5.1 Operation flow of the program run
- 5.5.2 SET 21 program function setting
- 5.5.3 SET 21 program function setting screen
- 5.5.4 SET 22 program setting
- 5.5.5 SET 22 program setting screen
- 5.5.6 Explanation of the screen display and operation of a program run
- 5.5.7 Complementary explanation of the program run
- 5.6 Explanation of the bank automatic switching function
- 6. Explanation on parameters
- 6.1 Input 1 type setting
- 6.2 Remote SV input type setting
- 6.3 Function key function setting
- 6.4 Control function setting
- 6.5 Output (from OUT 1 to OUT 7) type setting
- 6.6 Current transformer (CT) setting
- 6.7 DI setting
- 6.8 Timer function setting
- 6.9 Communication function setting
- 6.10 Initial setting
- 6.11 Priority screen setting
- 6.12 Bank function setting
- 6.13 PROGRAM FUNCTION SETTING
- 6.14 PROGRAM SETTING
- 6.15 BANK AUTOMATIC SWITCHING FUNCTION SETTING
- 7. Appendix
- 7.1 Product specifications
- 7.2 Accessories
- 7.3 Error (abnormality) display
- 7.4 Troubleshooting
- 7.5 Setting list
- 7.5.1 Run mode
- 7.5.2 Input 1 setting mode (SET 01)
- 7.5.3 Input 2 setting mode (SET 02)
- 7.5.4 Key function setting mode (SET 03)
- 7.5.5 Control setting mode (SET 04) (1/4)
- 7.5.6 OUT 1 and 2 setting modes (SET 05 and 06) (1/3)
- 7.5.7 OUT 3 to 7 setting modes (SET 07, 08, 09, 10 and 11) (1/2)
- 7.5.8 CT setting mode (SET 12)
- 7.5.9 DI setting mode (SET 13)
- 7.5.10 Timer 1 to 3 setting modes (SET 14, 15 and 16)
- 7.5.11 Communication setting mode (SET 17)
- 7.5.12 Initial setting mode (SET 18)
- 7.5.13 Priority screen setting mode (SET 19)
- 7.5.14 Bank setting mode (SET 20)
- 7.5.15 Program function setting mode (SET 21)
- 7.5.16 Program setting mode (SET 22)
- 7.5.17 Bank automatic switching function setting mode (SET 23)
48-7009-E 7-7
TTM-204 (9 pcs)
TTM-207 (12 pcs)
TTM-205 and 209 (14 pcs)
Output 1 monitor
Output 2 monitor
Output 3 monitor
Output 4 monitor
Output 5 monitor
Output 6 monitor
Output 7 monitor
RDY lamp
COM lamp
DI 1 monitor
DI 2 monitor
DI 3 monitor
DI 4 monitor
Timer lamp
5) Operation section
Key switch, 4 pcs (TTM-204) or 8 pcs (TTM-205, 207 and 209)
UP :
DOWN :
Function 1 : FUNC 1
Mode : MODE
Function 2 : FUNC 2
Function 3 : FUNC 3
Function 4 : FUNC 4
Function 5 : FUNC 5
(6) Other functions
The following functions are equipped with. For details, see the operation specification.
1) Process control Signals are output for matching the measurement value to the setting
value.
2) Blind function Any parameter can be set to non-display.
3) Priority screen function Any parameter screen can be displayed in the run mode screen.
(Max. 16 points)
4) Key assignment function FUNC keys 1 to 5 can be assigned for designated specifications.
5) Timer function Function of simplified timer can be set as listed below.
Setting accuracy: ± (1.5 % + 0.5 second) of setting time
6) Bank function A series of parameters for setting can be switched over.
7) Program run function A simple program run of eight steps at most is possible.
7.1.2 Environmental conditions
(1) Standard environment conditions
1) Temperature range 23 ± 10 °C
2) Humidity range 45 - 75 %RH
3) Installation gradient Base plane ± 3 degrees
4) Vibration condition 0 G
(2) Use environment conditions
1) Temperature range 0 - 50 °C
2) Humidity range 20 - 90 %RH (no dew condensation allowed)
3) Installation gradient Base plane ± 10 degrees
(3) Storage environment conditions
1) Temperature range -20 - +70 °C (no freeze or dew condensation allowed)
2) Humidity range 5 - 95 %RH (no dew condensation allowed)
(4) Power supply voltage 100 - 240 VAC, 50/60 Hz
(Allowable voltage range: 85 - 110 %)
24 VAC/DC, 50/60 Hz (205,207,209 are under development.)
(Allowable voltage range: 90 - 110 %)
TTM-204
TTM-205, 207 and 209