User Manual

48-7009-E 5-3
5.2 Operating monitor display
5.2.1 Operating amount monitor: SET 04 (control setting mode)
★ Output percentage at control is displayed.
1) Primary control operating amount monitor screen
S04-10 Primary control operating amount
* Smaller number indicates smaller operating (output) amount; larger number
indicates larger operating (output) amount.
* The control (output) amount is provided as output within the operating amount
setting limiter setting range.
For setting the operating amount setting, see page 6-20.
2) Secondary control operating amount display screen
S04-33 Secondary control operating amount
* Smaller number indicates smaller operating (output) amount; larger number
indicates larger operating (output) amount.
* The control (output) amount is provided as output within the operating amount
setting limiter setting range.
For setting the operating amount setting, see page 6-29.
5.2.2 Timer remaining time monitor: Run mode
★ Remaining time is displayed when the timer is operating.
Timer 1 remaining time monitor screen
Operating mode items 2, 3 and 4
* Upper row: ON delay
Lower row: OFF delay
* While operating, [:] blinks.
* ▲/▼ key to change remaining time
* Analogous to the remaining time monitor screens for timers 2 and 3
5.2.3 Temperature measurement monitor: Run mode
★ The present value being measured by the sensor is displayed.
Present measurement value monitor screen
* Upper row: Measurement value
* Lower row: Target value
5.2.4 CT monitor: SET 12 (CT setting mode)
★ The present value being measured by CT (current transformer) is displayed.
1) CT 1 measurement value monitor screen
S12-2 CT 1 current value monitor
* The present value being measured by the current transformer (CT) is displayed.
* Measurement value: 0.0 - 50.0 A
2) CT 2 measurement value monitor screen
S12-5 CT 2 current value monitor
* The present value being measured by the current transformer (CT) is displayed.
* Measurement value: 0.0 - 50.0 A