Operation Manual

BASIC SETTINGS
ON/Off /Mode Selection
- Press the button repeatedly (2) to turn the unit on and select a mode.
- To switch off, long press the button (2).
NOTE: The last active mode before stopping device is selected by default at startup.
Volume adjustment
Press the buttons (5) and (6) to adjust the volume from 0 to 16.
To set the clock time
- In Standby off mode
- Press and hold the (9) button, the alarm1 icon and the TIME display will blink.
- Press  button to set the hours ,
- Press  button to set the minutes.
- Then press (9) button to confirm.
Clock time check function
If you want to check the clock time during the PLAY mode, press the button once.
To set alarm function
In Standby off mode:
- Press and hold the button, the alarm1 icon and the TIME display will blink.
- Press  button to set the hours
- Press  button to set the minutes.
- After setting the alarm time as your desired, to press button again. You can now select
whether the alarm should go on to Buzzer, Radio or USB
Wake to buzzer
Press the / button until “bb” icon is shown in the display, the buzzer sound will start the set
alarm time.
Wake to Radio
Press the / button until the frequency is shown in the display. At the set time the alarm will go on
at the radio station you last listened to.
Wake to USB
Press the / button until the “USB” icon is shown in the display. This feature only works when you
have a USB disk inserted in the USB port. This USB will be played at the set alarm time
- Press the (6) button again to confirm your settings for Alarm 1.
- The alarm icon (Alarm 2) appears and the TIME display is blinking.
- Repeat step 2-6 in order to set Alarm 2.
To select which of the 2 alarms should be active, press the button repeatedly while the unit is in
standby mode (clock display). The display will show consecutively the Alarm 1 icon, the Alarm 2 icon, the
both Alarm icons. Press the button once again to deactivate the alarms (no alarm icon will be
displayed).
16