User's Manual

-12 -
Following illustration shows a connection example with ICOM radio(CI-V) and Tokyo Hy-Power HC-
1500AT, auto antenna tuner. HC-1500AT is equipped with such an advanced function as receiving
v
arious data (ex. Band data, SEND command etc.) from the radio and then passing them to the
linear amp. Example below utilizes this feature. (Refer to the HC-1500AT manual for the details.)
FUSE
FUSE
ANT B ANT A
INPUT
ALC ADJALC
SEND
TUNER
SELECT
AC IN
FUSE
FUSE
REMOTE
DC OUT
12V1A
CONT
SERIAL
USB
GND
ANT A
INPUT
AC IN
ANT
ALC RELAY
Transceiver
HL-2500FX
Coax cable
RCA plug cable
R
EMOTE
Option : ICOM cable
A
NT 3 ANT 2 ANT 1
C
ONTYAESU
K
ENWOOD
I N
T
RX
OUT
C
IVSTBY
I N
OUT
I N
OUT
D
C12V
Antenna
HC-1500AT
RCA plug cable
RCA plug cable
CI-V connection cable
Coax cable
Rower cable
８-B Connection with Auto Tuner HC-1500AT
Note
HL-2500FX can be combined with our HC-1.5AT, auto tuner as well. Connect
TUNER socket of HL-2500FX to CONT’L socket of HC-1.5KAT. Interface
technology of our original design enables the joint frequency band setting.
DC power for HC-1.5KAT can also be fed from auxiliary DC supply (DC OUT
12V/2A) terminal of HL-2500FX.
However, tuner will get “THRU (By-pass) mode when 50MHz is band set, as HC-
1.5KAT has no 50MHz position.