Instruction Manual

- 4 -

TOKYO HY-POWER LABS.,INC.

PAWER AMP

HL-45B

TX(IN) REMOTE ANT(OUT) DC13.8V

S/N

MADE IN JAPAN

0 0 00 000

7 8

⑥ TX (RF Input connector) :

Connector to apply RF drive signal from the transceiver.

Connect the coaxial jumper cable from the transceiver “ANT”.

Please note that input power for HL-45B is 5W max.

⑦ REMOTE :

Socket for remote cable from the transceiver.

To work hard-key (Standby), ALC feedback, and auto band-set (FT-817 only).

Refer to (4) TYPICAL CONNECTION AND SETTING.

⑧ ANT (RF Out connector) :

Connector to connect the antenna cable.

Use a 50Ω coaxial cable with PL-259 plug.

⑨ DC13.8V terminal :

Connect the supplied DC power cord to either regulated DC power supply or DC

12V battery.

RED is for positive (+), and BLACK is for negative (-).

Current capacity of the power supply should be 10A or more.