Installation Manual

ManualsBrandsToledo Locks ManualsCommercial Access ControlElectric Magnetic Lock 600lbs. and Wireless Remote System : Standard Buzz In Lock Kit : By TOLEDO

Electromagnetic Lock Installation Instruction

(Indoor Series)

In-swinging

Frameless

Glass Door

Out-swinging

Specifications

Holding Force Curve & Accessories

Optional Bracket

Regular Installation

With L-bracket for

narrow door frames

With U-bracket for frameless

glass door leaf

With LZ-bracket for

in-swinging door frames

P-MU-AM-EM Ver. G Publish:2007.11.07

4-1

Model Holding Force Current Draw Optional Bracket Sensor Output

EM-150 Series

10001 Series

10010 Series

10060 Series

EM-300 Series

EM-350 Series

10004 Series

420mA@12VDC

210mA@24VDC

500mA@12VDC

250mA@24VDC

500mA@12VDC

250mA@24VDC

500mA@12VDC

250mA@24VDC

500mA@12VDCX2

250mA@24VDCX2

500mA@12VDC

250mA@24VDC

500mA@12VDCX2

250mA@24VDCX2

L-300, EM-10001L bracket for narrow

door frames.

LZ-300, LZ-300N, EM-10001LZ bracket for

in-swinging doors.

EM-300L bracket for narrow door frames.

EM-300LZ bracket for in-swinging doors.

L-500 bracket for narrow door frames.

LZ-500,LZ-500N bracket for in-swinging

doors.

L-500 bracket for narrow door frames.

LZ-500N bracket for in-swinging doors.

L-300, EM-10001L bracket for narrow

door frames.

LZ-300N, EM-10001LZ bracket for

in-swinging doors.

L-350 bracket for narrow door frames.

LZ-350 bracket for in-swinging doors.

600 lbs(272 Kg)

600 lbs (272 Kg)

1200 lbs (545 Kg)

600 lbsX2 (272 KgX2)

800 lbs (363 KgX2)

1200 lbsX2

(545 KgX2)

Please note that the actual accessory pack varies according to the

electromagnetic lock model.

Electromagnet

Mounting Plate

Armature

Plate

Sexnut Bolt

Guide Pins

Rubber Washer

Washer

Armature screw

Door spacer

" L Z " Bracket

UBK Bracket

" L " Bracket

Out-swinging

Identify the door swinging direction and inspect the door frame header to determine if bracket is required. A L- bracket, LZ-bracket or U-bracket(optional)

may be required for the electromagnet depending on the frame header and swinging direction.

Narrow frame

The holding force of the electromagnetic lock is depending on the voltage of

the power supply. The graph below illustrates the change of the holding force

under different voltage. The holding forces of the electromagnetic lock used

here by the manufacture here "Colinear" force.

Fixing screw

Anti-tamper Cap

Holding force

Voltage (12 VDC)

300 lbs(136 Kg)

10002,10002TD,

10005,10005TD

EM-300M

EM-150M

10005,10005TD

EM-350M

10020,10020TD,

10020BZ

10040,10040TD,

10040BZ

Summary of content (4 pages)

PAGE 1
Electromagnetic Lock Installation Instruction (Indoor Series) Specifications Model Holding Force Current Draw Optional Bracket Sensor Output EM-150 Series 300 lbs(136 Kg) 420mA@12VDC 210mA@24VDC 10001 Series 600 lbs(272 Kg) 500mA@12VDC 250mA@24VDC L-300, EM-10001L bracket for narrow door frames. LZ-300, LZ-300N, EM-10001LZ bracket for in-swinging doors. 10002,10002TD, 10005,10005TD EM-300 Series 600 lbs (272 Kg) 500mA@12VDC 250mA@24VDC EM-300L bracket for narrow door frames.
PAGE 2
Regular Installation 3 2 1 Tem pl ate Out-sw inging door Tem pl ate Fold the mounting template along Close the door, find a mounting Place the template against the door the dotted line to a 90-degree location on the door frame near the and frame. Drill two holes in the frame angle. upper free-moving corner of the door, and three holes in door as indicated as close to the corner of the door on the template. frame as possible.
PAGE 3
With LZ bracket for In-swinging doors The "X" value in the table below for each bracket to mount on the door frame, shows the minimum requirement width of the door frame for different electromagnetic lock model. X Model X in In-swing g In-swinging "X" value 300 lbs serial ------- 600 lbs serial 48mm 800 lbs serial 54mm 1200 lbs serial 76mm Installation Steps of LZ bracket for In-swinging doors 1 2 Find a mounting location on the door frame for the L bracket.
PAGE 4
Important Notes UPS Power Input Power Control Device In-swinging During the installation procedure, it is important to make sure that the working direction of the armature plate has to be facing toward the contact surface of the electromagnetic lock intend to have the maximum holding force. Be aware that it is better to install the electromagnet lock inside the house and hide the cable inside the door frame in order to against the unlawful entry.