User Manual
EN - 34
SETTING THE DISHWASHER
SWITCHING THE DISHWASHER ON AND OFF
• Switch the dishwasher on by pressing the button (1).
• Press the (2) to select the appropriate washing programme, the programme indicator will be lit.
• Press the -knop (3) to start the program. The indicator light of the selected program will blink.
When the machine has nished a buzzer will sound for 8 seconds. The indicator light of the used program stops blinking.
• Switch the dishwasher o with the button (1).
NOTE! You can slightly open the door and wait a few minutes before unloading the dishwasher. The dishes and
cutlery will sll be very hot and may break as a result of the heat. Moreover, the dishes dry beer when allowed
to stand for a few minutes.
CHANGING OR PAUSING A PROGRAM
A programme can only be changed if it has been running only for a short period of me, otherwise the detergent may have
already been released or the the washing water with detergent has already been drained. If this is the case, the dishwasher
must be reset and the detergent dispenser must be relled.
If you would like to change a program while a washing cycle is already running.
• Press during 3 seconds the buon (3). Select another program and switch the dishwasher on again.
1. Press the -buon (3) to pause the program.
2. Carefully open the door a lile.
3. Wait unl the spray arm stops turning and than open the door completely.
4. Place the forgoen dishes in the dishwasher.
5. Close the door.
6. Press the -buon (3) to restart the program. The program will resume aer 10 seconds.
1 2 3