Operation Manual

y bed and breakfast type environments;
PARTS IDENTIFICATION
1. Spray nozzle
2. Water inlet
3. Burst of steam button
4. Spray button
5. Steam control knob
6. Indicator light
7. Handle
8. Temperature regulator
9. Water tank
10. Soleplate
11. Self-clean button
BEFORE INITIAL USAGE
y Remove all packaging material.
y Clean the iron base (see cleaning and care).
y Open the cover of water fill-in opening and fill distilled water into the water. For this,
use the measuring cup. Do not use chemically de-calcified water.
y Insert the power plug into a designated outlet and set the temperature regulator on
the highest temperature setting. After the indicator light up, set the steam selection
switch to position and iron on an old piece of cloth to remove possible residue.
y With first use, these can be slight odour or smoke. But this is harmless and only of
short duration. Make sure there is adequate ventilation.
OPERATION
y Before selecting the temperature, read the instruction manual for the iron or the care
advice on the tag of the clothing.
y Note: If there is no care advice on the piece of clothing, then you should begin
ironing with the lowest temperature. With lower temperatures, there will be less
steam.
y Caution: Synthetic fabrics can melt.
Nylon Synthetic fabrics, such as nylon and polyester
.
Silk Silk
..
Wool Wool
…
Cotton Cotton
MAX Linen Linen
DRY IRONING
y Connect the iron to a suitable mains supply outlet.
y Ensure that the steam control knob is in position “ 0 “.
y Select the setting on the temperature regulator.