TG2000i Operations Manual

MAINTENANCE
Cleaning the Air Filter
The air filter must be cleaned after every 50 hours
of use or 3 months (frequency should be increased
if generator is operated in a dusty environment).
1. Turn off the generator and let it cool for several
minutes if running.
2. Move the generator to a flat, level surface.
3. Unclip the clips on the top and bottom of the air
filter cover and remove the air filter cover.
Remove the gray fine inside air filte
4. Remove the black coarse outside air filter
5. Remove the gray fine inside the air filter
6. Wash the foam air filter elements by
submerging the elements in a
solution of household detergent soap
and warm water. Slowly squeeze the
foam to thoroughly clean.
NOTICE
NEVER twist or tear the foam air filter element
during cleaning or drying. Only apply slow but firm
squeezing action.
7. Rinse in clean water by submerging the air filter
elements in fresh water and applying a slow
squeezing action.
NOTICE
Never dispose of soap cleaning solution used to
clean the air filter by dumping the solution into
a sewer, on the ground, or into groundwater or
waterways. Always be environmentally responsible.
Follow the guidelines of the EPA or other
governmental agencies for proper disposal of
hazardous materials. Consult local authorities or
reclamation facility.
8. Dispose of used soap cleaning solution properly.