TG7000 Operations Manual

UNPACKING
UNPACKING THE
GENERATOR
Tools required – box cutter or similar device.
1. Carefully cut the packing tape on top of the carton.
2. Fold back top flaps to reveal the manual.
3. Remove the Wheel Kit Accessories cardboard box.
4. Carefully cut two sides of the carton to remove the
generator.
WHEEL KIT ACCESSORIES
BOX
Open the Wheel Kit Accessories box and verify the
contents against the list below. The wheel kit is optional
for the WHL2500 model and is not available for the
WHL1000 model. If any parts are missing, please
locate an authorized Tomahawk Generator dealer at
[phone]
Figure 3 – Wheel Kit Hardware
Components:
Wheels (2)
Handles with Grips (2)
Tool Bag (1)
Spark Plug Socket
Wrench (1)
Mounting Foot (1)
1 - Clevis Pin
55 x 8 mm
(2 used)
2 - Flange Bolt
M8 x 16 mm
(2 used)
3 - Wheel Axle Pin -
3250 Series Only
16 mm x 95 mm
(2 used)
Wheel Axle Pin -
5500 to 7500
Series Only
16 mm x 100 mm
(2 used)
4 - Locking Flange
Nut M8 (2 used)
5 - Hairpin Cotter
(2 used)
!
CAUTION
Always have assistance when lifting
the generator. The generator is heavy;
lifting it could cause bodily harm.
Avoid cutting on or near staples to
!
prevent personal injury.