Manual

NUT TIGHTENING
CAUTION
■ Use an Angle Wrench when specifed to.
■ Apply grease to the contact areas prior to tightening. This will prevent any damages to the contact
areas, so that the correct torque specs can be obtained.
② Follow the numerical order as shown on the left.
(1) 1st time Torque to 29.4N・m (3.0kgm).
(2) 2nd time, turn 45° with an Angle Wrench.
[Apply Heatproof Lubricant]
Surface
Thread
⑭
⑩
⑥
②
④
⑧
⑫
⑬ ⑨⑤① ③⑦⑪
7
SPECIFICATIONS
STUD BOLT (Short)
MATERIAL SNCM439 SNCM439 SCM435
WEIGHT 59g 54g 8g
M10xP1.5 L122SIZE M10xP1.5 L110 M10x1.5 (Suits 14mm Tool)
STRENGTH 157kg/m㎡ 157kg/m㎡ －
STUD BOLT (Long) NUT
⑭
⑩
⑥
②
④
⑧
⑫
7