Instruction Manual

REQUIRED TOOLS

These tools are the bare minimum required for the job.

CAUTION

■ This product is designed to be used for off road competition purposes only.

■ This product is to be installed by a qualified professional in a fully equipped workshop.

■ This product was designed specifically for the application specified. If attempt was made to use

this product on another engine/car, other than specified, then you will risk damaging this kit and or

the engine, or components related with it.

■ This product is to be installed with the appropriate tools and equipment to prevent any engine failures ,

injuries or bodily harm.

WARNING

■ This product is to be installed, when both the engine and engine bay is cold.

■ Please be sure that all parts are fitted correctly to avoid any possible fire risk hazards.

1. REMOVAL OF THE STOCK EXHAUST MUFFLER

This manual only provides the simple instructions. For more details please refer to the vehicles

official service manual.

<TYPE-60R/60S/80 Related Parts>

1. Disconnect the cars negative terminal battery.

2. Remove the exhaust main muffler.

3. Remove the center exhaust pipe.

<TYPE-60R>

4. Remove the 2 hangers of the main muffler from the right side of the vehicle, remove 1 from the front

left side hanger.

<TYPE-60S>

4. Remove the 2 main muffler hangers from the left side of the vehicle.

<TYPE-80>

4. Remove the 2 hangers of the main muffler from the right side of the vehicle.

At the same time, remove the gasket from the catalyst side.

・Gener al Engi ne Mai nt enanc e Tool s ・ Tor que Wr enc h ・Wor kshop Ser vi ce Manual .