Owner manual

7
1. REMOVING THE STOCK MUFFLER
This manual only provides the simple instructions. For more details please refer to the vehicles
official service manual.
1. Disconnect the cars negative terminal battery.
2. Remove the exhaust main muffler.
3. Remove the center exhaust pipe.
4 Remove the muffler hanger of the exhausts main muffler from the left side of the cars body.
2. TOMEI TITANIUM MUFFLER INSTALLATION
【Illustration of the mounting position of each parts】
The installation of the included parts in the kit is shown below.
* Stock gaskets & Springs are reused for JDM model installations.
① Main Pipe A
② Main Pipe B
③
Silencer ASSY
④ Gasket (t=4mm)
④ ※1 Gasket (t=2mm)
⑤ Bolt L=55mm
⑤ ※1 Bolt M8 L=35mm
⑤ ※2 Bolt M10 L=35mm
⑥ Nut M8 〔20.0～28.0N・m(2.0～2.9kgf-m)〕
⑥ ※1
Nut M10 〔34.0～39.0N・m(3.5～4.0kgf-m)〕
⑦ Clamp Band 〔25.0N・m(2.6kgf-m)〕
⑧ Spring
⑨ Silencer Band
⑩ Silencer Band Rubber
⑪ Bolt M8
⑫ Nut M8 〔20.0～28.0N・m(2.0～2.9kgf-m)〕
⑬ Sound Reducer
⑭ Button Bolt M6 〔8.0～12.0N・m(0.8～1.2kgf-m)〕
* Apply the bolt smooth paste that is supplied in the kit to
prevent metal burns and seizures to the bolts and nuts.
①
②
③
④
⑤
⑤
⑭
⑬
⑨
⑥※
⑥※
⑧
⑦
⑩
⑫
＜Kit contents torque specs＞
⑪
⑦
⑧
⑧
⑧