Operation Manual

MP1045

3. Settings sub-menu

You might need to change some default setting as you desired in settings menu before you start to use the

player.

To change setting, from main interface menu, tap “Settings” icon, a settings interface menu appear to use.

Setting Interface Menu

a. Music menu

There are four options in this music menu, including Repeat Mode, Play Mode, EQ Select and User EQ Set.

Repeat Mode

• In Repeat mode, tap “Once / Repeat one / Folder Once / Folder Repeat / All Once / All Repeat /

Intro” as you desired.

Play Mode

• In Play Mode, tap “Order / Shuffle” as you desired.

EQ Select

• In EQ Mode, tap “Normal / 3D / Rock / Pop / Class / Bass / Jazz / User EQ” as you desired.

User EQ Set

• In User EQ set, there are five frequencies and every frequency has six grades available for adjust.

• Tap on “60Hz / 300Hz / 1Khz / 3KHz / 6KHz” center button, then the selected frequency button will

highlight in yellow.

• Then tap “Up” and “Down” arrow to adjust the levels as you desired.

b. Record menu

Record Quality

• Tap “High Quality / Normal Quality” as you desired. (64kbps / 32kbps)

REC Volume

• Tap “+1 / +2 / +3 / +4 / +5” as you desired. The higher the number is the higher the volume is.

c. Display menu

BLight Time (Backlight Time)Tap “5 / 10 / 15 / 20 / 30 Seconds / Always On” as you desired.

Lum (Luminance)

• Tap “1 / 2 / 3 / 4 / 5” as you desired. The higher the number is the higher brightness is.

Blight Mode (Backlight Mode)

• Tap “Normal / Power Saving” as you desired. Choose power saving will increase the player battery

performance.