User's Manual

62
The track route is shown on the map view.
3. Select the track, then select the pop-up menu.
4. Select Drive to Starting Point.
The starting point of the track is converted to your first stop and then the route is planned.
Guidance to your destination begins from your current location. As soon as you start driving, the
guidance view is shown automatically.
Note: You see two different colours on the map for your route and track. You see one colour for
the route from your curent location to the starting point, and another second colour for the
track.
Tip: There are two other ways to navigate using a saved route:
Select the starting point of the route. When the pop-up menu opens, select Drive to Starting
Point.
Alternatively, select Drive to Starting Point or Ride to Route in the Current Track menu.
Navigating to a stop on a saved route
You can navigate from your current location to a stop on your saved route instead of to the start of the
saved route. The stop is changed to the start of your route. Your new starting point might be one
closer to your current location, or you might just want to make your route shorter.
Note: The route from the original starting point up to the new starting point is removed from the
route.
Note: Your original route in My Routes is not changed. If you want to see the whole route, select the
route again in My Routes.
1. In the Main Menu, select My Routes.
2. Select a route from your list.