User's Manual

These symbols are used to show the status of QuickGPSfix:
QuickGPSfix on your camera is up-to-date.
QuickGPSfix on your camera is out-of-date. If the QuickGPSfix
information on your camera is out-of-date, your camera still works as
usual. It may, however, take longer to get a GPS fix when you want to
or
start an activity.
If you see this icon, you are using a very old version of the software and
should update your camera as soon as possible.
 Version - the software version number of your camera. You may need this information if you
contact Customer Support. Every time you connect your camera to your computer, TomTom
MySports Connect checks if a software update is available for your camera.
 Serial number - The serial number of your Action Camera.
Sensors built in to your camera
Your Action Camera has the following sensors built-in to the camera:
 3D accelerometer
 Rate-gyro
 Compass
 GPS
 Barometer
 Temperature
The sensors are used for action metrics to show you full details of your activities on your videos and
photos. The data is stored with your videos and photos.
You can also use peripheral sensors, for example a heart-rate monitor, to enhance your action
metrics.
An optional external mono microphone can also be connected to your camera.
Switching on and off
Your Action Camera can be on, off, or in standby. You can only switch the camera on and off using the
buttons on the camera.
Switching on your Action Camera
Press the START button at the back of the camera for 2 seconds to switch your camera on. If no SD card
is inserted into the battery stick, you are asked to insert one so that the camera can switch on.
The camera stays on for any of the following conditions:
1. The camera is recording a video or you are taking photos.
2. You are using the screen to set-up the camera.
3. You are operating the camera from your mobile phone using Wi-Fi or Bluetooth.
Switching off your Action Camera
Press the STOP button (button 1) at the front of the camera for 2 seconds to switch off the camera.
The camera can also be off in any of the following conditions:
1. No battery is installed in the camera.
2. The battery is empty. If the camera is in on or in standby mode, it will switch itself off if the
battery level becomes too low.
21