User's Manual

Taking photos
About photo modes
You can use your Action Camera to take photos in the following modes:
 Single - A single photo is taken.
 Burst - A series of photos are taken in a very short time.
 Continuous - A series of photos are taken at a pre-set interval (also called photo logging).
Photo Mode Summary
Mode Resolution Capture rate Field of view
Single 16MP 1 per sec Wide
5 per sec
Burst 16MP
Burst 8MP
10 per sec Wide
5 per sec
10 per sec Wide
1 per sec
1 every 5 sec
Continuous 16MP
1 every 10 sec
1 every 15 sec
Wide
1 every 30 sec
1 every 60 sec
Photos are saved in the JPEG/Exif format.
Taking single photos
1. Go left from the Hub screen and select Photo . Go right back to the Hub screen.
Tip : To change settings for the selected mode, move down from the Hub screen to Settings, then
move left to the settings for that mode.
2. Aim the camera at the subject.
3. Press the START button to take a photo.
Taking burst photos
1. Go left from the Hub screen and select Photo . Go right back to the Hub screen.
Tip : To change settings for the selected mode, move down from the Hub screen to Settings, then
move left to the settings for that mode.
2. Aim the camera at the subject.
3. Press the START button to take a photo burst.
The screen shows the number of photos taken.
Taking continuous photos
1. Go left from the Hub screen and select Photo . Go right back to the Hub screen.
Tip : To change settings for the selected mode, move down from the Hub screen to Settings, then
move left to the settings for that mode.
2. Aim the camera at the subject.
3. Press the START button to take continuous photos.
33