User's Manual
Use these settings to select the general options for your camera, such as language and units.
Language
Select
LANGUAGE
to set the language used for menus and messages on your camera.
Units
Select
UNITS
to set the units to
KM
(metric) or
Miles
(imperial).
REVIEW QUESTION: NO nautical miles for this release?
Sound
Select
SOUND
to switch the buzzer sound on the camera
ON
or
OFF
.
When the camera is out of your sight, for example when mounted on your helmet, the buzzer tells you
when the camera has started and stopped recording, when the power is switched on or off, and if a
camera notification arrives.
You may wish to turn the buzzer off if you need silence when recording, for example, when riding
through a landscape with wildlife.
Note
: This setting does not control the audio recordings made while videoing.
Light
Select
LIGHT
to switch the LED lights on the camera
ON
or
OFF
.
Tip
: Switching the LEDs off will save battery power.
Reset
Select
RESET
to reset your camera to the factory settings.
Note
: A reset does not delete your photos and videos stored on the memory card.
Storage
Using the
STORAGE
settings you can delete items from the memory card and format the memory card.
Deleting
the
last
file
1.
From the Camera Status screen on your camera, move down to open the
SETTINGS
screen.
2.
Select
GENERAL
then select
STORAGE
.
3.
Select
DELETE
LAST
.
This selection deletes only the last file that was stored on the memory card.
Deleting
all
photos
and
videos
1.
From the Camera Status screen on your camera, move down to open the
SETTINGS
screen.
2.
Select
GENERAL
then select
STORAGE
.
3.
Select
DELETE
ALL
.
This selection deletes all the photos and videos you made with your Action Camera from the
memory card.
Formatting
the
memory
card
1.
From the Camera Status screen on your camera, move down to open the
SETTINGS
screen.
2.
Select
GENERAL
then select
STORAGE
.
3.
Select
FORMAT
SD
.
This selection formats your memory card.
38