User's Manual

Using the universal camera mount
Hi, Claire-
We can use:
Universal Mount
Bike Mount
Adhesive discs (FYI: used with Universal Mount)
You can mount your camera in many places, for example on your helmet or on the handlebars using the
optional bike mount. Once mounted you can move your camera in the following ways:
 You can lift it up and down by 90 degrees, known as the pitch.
 You can twist it around by 360 degrees, know as yaw.
 You can roll the whole camera by 100 degrees to the left or right.
Using a disc adapter to mount your camera
The disc adapter kit lets you mount your camera on a helmet or other flat or slightly curved surface.
The kit contains 2 adhesive discs and a universal adapter.
1. Attach the adhesive disc to your chosen surface. Firmly press it into place to ensure full contact
over its entire surface.
Follow these tips to make sure that the adhesive disc is secure:
 Apply the adhesive disc only to a clean and dry surface. Wax, oil, dirt and moisture reduce
adhesion, which can result in a weak bond.
 Attach the adhesive disc in dry, room-temperature conditions. The adhesive disc won't be
secure if you attach it in damp and cold conditions.
 Attach the adhesive disc only to a smooth and hard surface. The adhesive disc won't securely
attach to porous, textured or soft surfaces.
 When you attach the adhesive disc, Regularly check the security of the adhesive disc.
8