Safety Data Sheet

Reference Number : MSDS-160308-01
Page 5 of 7
 Hazardous reactions occurring under specific conditions
 Conditions to avoid : When a battery cell is exposed to an external short-circuit, crushes, modification,
high temperature above 100 degree C, it will be the cause of heat generation and ignition. Direct
sunlight and high humidity.
 Materials to avoid : Conductive materials, water, seawater, strong oxidizers and strong acids.
 Hazardous decomposition products : Acrid or harmful gas is emitted during fire.
SECTION 11 TOXICOLOGICAL INFORMATION
None unless internal materials are exposed.
In case of exposure, these cells contain the chemicals listed below.
Components ACGIH
Lithium cobalt dioxide (LiCoO
2
) 0.02mg/m
3
as Co
Lithium hexafluorophosphate (LiPF
6
) 2.5 mg/m
3
as F
Ethylene carbonate (C
3
H
4
O
3
) Not Established
Chain carbonate (-) Not Established
Graphite (C) 2 mg/m
3
as dust
In case of internal has released or electrolyte spilled: Electrolyte containing LiPF
6
and organic Solvents has
a small amcunt of toxicity and may cause irritation of the skin or eyes. Released may also cause irritation of
skin or eyes.
None of the following substances will be exposed, leaked, or emitted during transportation, storage or any
operation and any temperature condition:
Chlorinated Fluorohydrocarbon (FCKW)
Acrylonitride
Styrol
Phenol
Benzol
Mercury of greater than 0.0001 wt% for alkaline battery
Mercury of greater than 0.0005 wt% for other battery
Cadmium, lead, and other harmful heavy metal
Lithium ion batteries containing no more than 1.5g/cell and 8g/battery pack
Lithium ion cell, a watt-hour rating is not more than 20Wh and for lithium ion battery is not more than
100Wh