User Manual
Table Of Contents
- Welcome to navigation with TomTom
- What's new
- Installing your Rider
- Connecting a headset
- TomTom services
- Connecting a smartphone
- Wi-Fi connection
- Using your Rider
- What's on the screen
- Calls and smartphone notifications
- Traffic
- TomTom MyDrive
- About TomTom MyDrive
- Logging into TomTom MyDrive
- Road Trips collection – sending a route to your device
- Road Trips collection - planning a route to a stop
- Setting a destination using MyDrive
- Planning a route with stops using MyDrive
- Choosing where you want to start driving a route
- Showing a planned destination in MyDrive
- Clearing a MyDrive destination
- Deleting a MyDrive destination from My Places
- Set a phone contact as your destination using the MyDrive app
- Finding and syncing locations using MyDrive
- Syncing My Places locations with MyDrive
- Importing a community POI list
- Deleting a community POI list
- Importing a track GPX file
- Deleting a track GPX file
- Saving and restoring your personal navigation information
- Quick search
- Choosing which search to use
- Using quick search
- Planning a route using quick search
- Using destination prediction
- Planning a route to an address
- Planning a route to a city center
- Planning a route to a POI
- Planning a route to a POI using online search
- Planning a route using the map
- Planning a route using My Places
- Planning a route using coordinates
- Planning a route using a mapcode
- Planning a route in advance
- Finding a parking lot
- Finding a gas station
- Step by step search
- Choosing which search to use
- Using step-by-step search
- Planning a route using step-by-step search
- Using destination prediction
- Planning a route to an address
- Planning a route to a city center
- Planning a route to a POI
- Planning a route to a POI using online search
- Planning a route using the map
- Planning a route using My Places
- Planning a route using coordinates using step-by-step search
- Planning a route in advance
- Finding a parking lot
- Finding a gas station
- Changing your route
- The Current Route menu
- Avoiding a blocked road
- Avoiding part of a route
- Finding an alternative route
- Types of route
- Avoiding features on a route
- Avoiding an incident or route feature using the route bar
- Adding a stop to your route from the current route menu
- Adding a stop to your route using the map
- Deleting a stop from your route
- Skipping the next stop on your route
- Reordering stops on a route
- My Routes
- About My Routes
- About GPX and ITN files
- Adding to My Routes using MyDrive
- Saving a route
- Navigating using a saved route
- Navigating to a stop on a saved route
- Adding a stop to a saved route using the map
- Recording a track
- Navigating using a track
- Deleting a route or a track from My Routes
- Exporting tracks to a memory card
- Importing routes and tracks from a memory card
- Importing routes from your computer using USB
- My Places
- About My Places
- Setting your home or work location
- Changing your home location
- Adding a location from My Places
- Add a location to My Places from the map
- Adding a location to My Places using search
- Adding a location to My Places by marking
- Deleting a recent destination from My Places
- Deleting a location from My Places
- Using community POI lists
- Map Share
- Safety Cameras
- Settings
- Getting Help
- UsingTomTom MyDrive Connect
- Addendum
- Copyright notices
10
Mounting on a motorcycle
Important: TomTom and RAM assume no responsibility or liability in connection to damages suffered
due to modifications, improper installation, road hazards, or accidents. Neither RAM nor TomTom
shall be liable for any loss or damage, direct, indirect, or consequential, arising out of the improper
installation, or inability to use and/or mount the product. Before use, the user shall determine the
suitability of the product for its intended use. The user assumes all risk and liability, as far as
permitted by law, in connection with the mounting of the product.
1. Attach the RAM™ mount kit to your motorcycle.
2. Fix the holder to the mount and connect the wires to your motorcycle's wiring system.
Important: The red POS (+) contact needs to be connected to the motorcycle's wiring loom at
a point between the ignition and the +12V battery supply. The black NEG (-) wire needs to be
connected to the motorcycle's wiring loom at a point between the ignition and the -(GND)
battery supply. Attach to a 12V point that can be switched off by the ignition such as the light
circuit.
When you are attaching the mount kit to your motorcycle, follow these guidelines:
If you are unsure about attaching the mount kit yourself, ask a professional to fit it for you.
Installing your Rider