Operating Instructions

Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and

the time difference in hours and half hours in the arrival information panel. The estimated

time of arrival is the local time at your destination.

Tip: You can add a stop to a route that you have already planned.

Tip: You can save a route using My Routes.

Planning a route using coordinates

Important: In the interest of safety and to avoid distractions while you are driving, you should

always plan a route before you start driving.

To plan a route using a pair of coordinates, do the following:

1. Select the Main Menu button to open the Main Menu.

2. Select Search.

The search screen opens with the keyboard showing.

3. Select the type of search button to the right of the search box.

4. Select Latitude Longitude.

5. Type in your pair of coordinates. You can enter any of these coordinate types:

 Decimal values, for example:

N 40.75773, W 73.985708

40.75773, -73.985708

Tip: For decimal values you don't have to use a letter to indicate the latitude and longi-

tude. For locations west of the 0 meridian and locations south of the equator, use a minus

sign (-) before the coordinate.

 Degrees, minutes and seconds, for example:

N 40°45′28″ W 73°59′09″

 GPS standard coordinates, for example:

N 40 45.46 W 73 59.15

Note: The bar below the coordinates turns red if you enter coordinates that are not recognized

by your TomTom navigation app.

6. As you type in the coordinates, suggestions are shown based on what you have entered. You can

continue typing or select a suggestion.

Towns and roads are shown on the left; POIs are shown on the right.

Tip: To see more results, hide the keyboard or swipe the results list to scroll it.