Operation Manual

45
“Start-up preferences”
This menu allows you to change the
system start-up and to change the
start-up page by customising it with a
photo of your choice.
“Enable compass”
This menu allows you to activate or de-
activate the compass during navigation.
“Set clock”
When the clocks change in summer
or winter, or when you are travelling
abroad, you will need to adjust the time
on your system.
Select “Set clock”; the system offers
you three display modes. Select the
desired mode, then “Done” using the
soft button. Set the clock, then select
“Done”.
SYSTEM SETTINGS (5/6)
Preferences 4 of 5
Planning pref-
erences
Start-up prefer-
ences
Show compass Set clock
Show lane
images
“Show lane images”
When approaching a road change (on
major roads), the system may switch to
“Show lane images” mode: a 3D image
provides a close-up view of the junction
with a turn arrow and road signs.
You can deactivate this function by se-
lecting “Hide lane images”. To react-
ivate it. select “Show lane images”.
Clock synchronisation
The synchronisation option allows you
to set the time directly using GPS in-
formation.
Select this option by pressing the
lefthand “Sync” soft button.
Set units