Operation Manual

51
Note: if you do not use the remote
control for 20 seconds, it will switch to
power saving mode.
If you do not use the remote control for
20 minutes, it switches off completely.
Press any button to switch your remote
control on.
REMOTE CONTROL: batteries
When the LED on the remote control
flashes red and a message appears on
the screen, change the batteries in your
remote control.
Hold the sides of the remote control and
press latch A on the back of the device.
The keypad lifts out from the back of
the device.
Note: take care not to drop the keypad.
Place the batteries (type: AAA/LR3/
UM4 (1.5V)) in the remote control.
Make sure you put the batteries in the
correct way round, as shown on the
remote control.
Replace the battery cover and press
any button to switch on the remote con-
trol.
Your remote control connects to your
navigation system automatically.
Do not throw away your used batteries; give them to an organisation responsible
for collecting and recycling batteries.
A
A