Advanced Car Kit CK-7W User Guide Installation Guide 9310692 Issue 5 EN
DECLARATION OF CONFORMITY Hereby, NOKIA CORPORATION, declares that this HF-5 product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The product is in conformity with the limits defined in Directive 2004/104/EC (amending Directive 72/245/ EEC), Annex I, paragraph 6.5, 6.6, 6.8 and 6.9. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/declaration_of_conformity/. 0434 Copyright © 2007 Nokia. All rights reserved.
Contents For your safety......................... 4 Introduction ............................. 5 Your Nokia Advanced Car Kit CK-7W ...................................................... 5 Bluetooth wireless technology .......... 6 Bluetooth passcode............................... 6 1. Getting started..................... 7 Overview .................................................. Use of enhancements........................... Phone holder ....................................... Antenna coupler...........
For your safety For your safety Read these simple guidelines. Breaking the rules may be dangerous or illegal. Further detailed information is given in this user guide. Keep all miniature SIM cards and accessories out of the reach of small children. ROAD SAFETY COMES FIRST Remember that the safety of operating a motor vehicle in traffic requires the full attention of all motorists.
Introduction Introduction ■ Your Nokia Advanced Car Kit CK-7W Advanced Car Kit equipment installation in the cockpit The Nokia Advanced Car Kit was developed for installation in motor vehicles to enable handsfree operation of mobile phones and use of individual phone features. A special emphasis was placed on quick and easy installation. A mobile phone can be connected to the Advanced Car Kit in one of two ways: using an optional phone holder with a cable or over a Bluetooth wireless connection.
Introduction ■ Bluetooth wireless technology Bluetooth wirteless technology is an international standard for shortrange wireless communication. It allows you to establish a wireless connection within a range of 10 metres between your Advanced Car Kit and a compatible device. The Advanced Car Kit is intended for use with any mobile phone that supports the Bluetooth Handsfree Profile (Bluetooth HFP).
Getting started 1. Getting started ■ Overview The Advanced Car Kit includes the components shown above. • 1 Handsfree unit HF-5 with mounting plate MK-2 • 2 Remote control button CU-7 • 3 Loudspeaker HFS-12 • 4 Microphone MP-2 • 5 Cable set PCU-4 • 6 Data cable CA-27 • 7 Charger cable CA-116 ■ Use of enhancements Depending on the setup, a variety of optional enhancements are available to extend your Advanced Car Kit.
Getting started best suit your needs. Use only approved enhancements. Ensure that only compatible products are connected to your Advanced Car Kit. Phone holder You will need a phone holder designed for a compatible mobile phone if the mobile phone is to be connected direct to the handsfree unit using the data cable. Antenna coupler An antenna coupler is required to connect an external antenna. A range of antenna couplers are commercially available for the mobile phones and phone holders on the market.
Installation 2. Installation ■ Safety information The basic safety guidelines set out below are to be observed when installing the Advanced Car Kit . Note: • Only qualified personnel should service the Advanced Car Kit or install it in a vehicle. Faulty installation or service may be dangerous and may invalidate any warranty which may apply to the unit. • The Advanced Car Kit may only be installed by a qualified service technician using the approved original Nokia parts supplied in the sales package.
Installation of the system. If you have any concerns, contact your car dealer before any installation work is done. • Do not wire Advanced Car Kit equipment to the highvoltage lines of the ignition system. • All equipment must be mounted so that it does not interfere with the operation of the vehicle. • Your service technician may be able to provide you with information on alternatives for mounting the equipment suitably in your vehicle without requiring boreholes.
Installation ■ Configuration In principle, the Advanced Car Kit offers two different basic configurations for installation: Connecting a mobile phone using Bluetooth wireless technology To be able to establish a connection from a compatible mobile phone to the handsfree unit, both devices first have to be paired. A compatible mobile phone supporting Bluetooth wireless technology is required for this setup.
Installation Connecting a mobile phone using the data cable and a phone holder When connected via the data cable, the compatible mobile phone is ready for operation with the Advanced Car Kit when placed into the phone holder. Depending on your mobile phone and your vehicle equipment, enhancements such as a phone holder, antenna coupler or external antenna may be required. ■ Installing the Advanced Car Kit See “Introduction,” p. 5 for an example of a suitable installation of the Advanced Car Kit equipment.
Installation Handsfree unit When installing the handsfree unit, ensure that the cables for the microphone and loudspeaker will reach the places you intend to mount these components. Take care not to mount the handsfree unit inside a closed metal housing or in a place in the car where it would be shielded from radio waves as this may impair the use of the Bluetooth feature.
Installation To mount the remote control button, use the hook and loop tape provided. First detach the two parts of the pads from each other. Attach the pad with the loops first: peel off the protective sheet from the adhesive side (A) and attach the pad to the desired location in your car (B). Make sure that the surface where you intend to attach the pad is dry and free from dirt and dust.
Installation Take care to mount the microphone so that it is not exposed to air streams from the vents. Do not lay the microphone cable in the heating, ventilation or AC system. Use the double-sided adhesive tape supplied to fix the microphone as this will prevent noise from the car body being transmitted into the interior. Insert the plug into the "MIC" socket in the handsfree unit and turn it clockwise to lock it firmly.
Installation Some vehicles do not come with an IGNS connection. This line is not necessary for operation of the Advanced Car Kit; the blue wire can be left unconnected. However, in this case, the Advanced Car Kit does not switch off automatically when the ignition is turned off. To prevent accidental draining of the car battery, the Advanced Car Kit automatically switches off after two minutes unless a mobile phone is connected over Bluetooth wireless technology or the data cable.
Putting the Advanced Car Kit into service 3. Putting the Advanced Car Kit into service A compatible mobile phone can be connected to the Advanced Car Kit in one of two ways: over a Bluetooth wireless connection or using a compatible phone holder with a cable.
Putting the Advanced Car Kit into service 7. The mobile phone has now been paired with the Advanced Car Kit and is ready for operation. Note: The Advanced Car Kit can only establish a Bluetooth wireless connection to one compatible mobile phone. Therefore, you may need to end or break an existing Bluetooth wireless connection. Automatic pairing with a compatible mobile phone 1.
Operation 4. Operation The Advanced Car Kit can be controlled with the remote control button or operated using the keypad of a compatible mobile phone. ■ Remote control button 1 The button can be used as follows: • Press • Press and hold (approx.
Operation ■ Switching the Advanced Car Kit on/off When you turn on the ignition of your car, you automatically switch on the Advanced Car Kit. The indicator light goes on to show that the Advanced Car Kit is activated. When you turn off the car ignition, you deactivate the Advanced Car Kit and the indicator light goes off.
Operation Redialling To redial a number that you have recently called, press the button twice briefly. Voice dialling You can use voice tags that you have saved in your mobile phone: 1. To start voice dialling, press and hold the button until you hear a tone. 2. Say the voice tag. 3. The mobile phone plays the voice tag and dials the corresponding phone number. For details on using voice dialling, see the user guide of your mobile phone.
Operation The list of paired Bluetooth devices can be erased. To erase the list, the Advanced Car Kit must be switched off (indicator light goes off): Press and hold the button until a signal tone indicates that the list has been erased. Switching from handsfree mode to the mobile phone • If you have connected a compatible mobile phone to the Advanced Car Kit using the data cable, take the phone out of the holder to switch operation from handsfree mode over to the mobile phone.
Care and maintenance Care and maintenance Your Advanced Car Kit is a product of superior design and craftmanship and should be treated with care. The suggestions below will help you to fulfil any warranty obligations and to enjoy this product for many years. • Keep all enhancements out of the reach of small children. • Keep the Advanced Car Kit dry. Precipitation, humidity and all types of liquids or moisture can contain minerals that will corrode electronic circuits.
