TomTom
1. Before you start Before you start Switching on Follow the instructions at the start of this manual to dock your TomTom in your car stereo. Your TomTom can also be used without docking it in your car stereo. A mount is available as an accessory so that you can use your TomTom in other cars. The first time you switch on your TomTom, it may take up to 20 seconds to start. To switch off your TomTom, press and hold the On/Off button for 2 seconds.
It is important to take care of your TomTom. • Your TomTom is not designed for use in extreme temperatures and any such exposure may cause permanent damage. • Do not open the casing of your TomTom under any circumstances. Doing so may be dangerous and will invalidate the warranty. • Wipe or dry the screen of your TomTom using a soft cloth. Do not use any liquid cleaners.
2. Driving View Driving View When your TomTom starts, you are shown the Driving View along with detailed information about your current location. Tap the center of the screen at any time to open the Main Menu. Note: The Driving View is shown in black and white until your TomTom locates your current position. A Tap + and - to zoom in and out. B Quick menu - swich this on in the Preferences menu. C Your current position. D The name of the next major road or road sign information, if applicable.
3. Making your first trip Making your first trip Planning a route with your TomTom is easy. To plan your first route, follow the steps below. Important: You should always plan your journey before you start driving. It is dangerous to plan a route while driving. 1. Tap the screen to bring up the main menu. Note: The buttons on your TomTom are shown in full color unless a button is currently unavailable. For example, the button named Find alternative...
• Cross street or intersection - tap this button to set your destination as the point where two streets meet. • Spoken address - tap this button to set your destination by announcing the address to your TomTom. In this example, we will enter an exact address. 4. Tap Street and house number. Note: When planning a trip for the first time your TomTom asks you to choose a country. Your choice is saved and used for all routes you plan. You can change this setting at any time by tapping the country flag.
8. Your TomTom asks if you need to arrive at a particular time. For this exercise, tap NO. The route is calculated by your TomTom. 9. When the route has been calculated, tap Done. Your TomTom will immediately begin to guide you to your destination, using both spoken instructions and on-screen directions. Arrival times When you plan a route, your TomTom asks you if you need to arrive at a particular time. Tap YES to enter a preferred arrival time.
Tap Status bar preferences in the Preferences menu, to enable or disable arrival time notifications. Status bar preferences Select the required options on the first menu screen and then tap Done. To enable arrival time notifications, select Show leeway to arrival time. What are the other navigation options? When you tap Navigate to..., you can set your destination in many ways, not just by entering the address. The other options are listed below: Tap this button to navigate to your Home location.
Tap this button to select the last recorded position where your TomTom navigation device was docked, as your destination. Last docked Planning a route in advance You can also use your TomTom to plan trips in advance by selecting both your starting point and your destination. You could, for example, do the following: • Find out how long a trip is going to take before you start. • Check the route of a trip you are planning.
Tap this button to see each turn in the trip. Tap the right and left arrows to move forwards and backwards through the trip. Browse as images Tap the screen to turn off the 3D display and view the map from above. Tap this button to see an overview of the route using the map browser. Browse map of route Tap this button to watch a demo of the trip. You can interrupt the demo at any time by tapping the screen. Show route demo Tap this button to open the route summary screen.
4. Finding alternative routes Finding alternative routes Once you have planned a route, you may want to change something about the route, without changing your destination. Why change the route? Maybe for one of these reasons: • You can see a roadblock or a line of traffic ahead. • You want to travel via a particular location, to pick someone up, stop for lunch or fill up with gas. • You want to avoid a difficult intersection or a road you don’t like. Tap Find alternative...
Tap this button to change your route so that it passes a particular location, perhaps to pick someone up on the way. Travel via... You choose the location you want to pass in the same way as you choose a destination. So you can select from all the same options: for example, Address, Favorite, Point of Interest and Point on map. Your TomTom will calculate a new route to your destination that passes the location you chose.
5. Menus Menus Main menu Tap the screen at any time when TomTom displays the Driving View to open the Main Menu. • Navigate to... Tap this button to start planning a route. • Find alternative... Tap this button if you want to avoid part of your route, travel via a specific location or calculate an alternative route. • Help me! Help me! provides an easy way for you to find and contact emergency service centers and other special services. • Mobile phone This button opens the mobile phone menu.
Hidden buttons and features When you first start using your TomTom, not all the buttons will be shown in the menu. Many buttons and some more advanced features are hidden because you will not need these features very often. To show all buttons and features, tap Show ALL menu options in the Preferences menu. To hide these buttons again, tap Show fewer menu options in the Preferences menu.
6. Sounds and voices Sounds and voices The sound on your TomTom is used for features such as: • Spoken instructions • Hands-free calls • Warnings How do I change the volume level? You can change the volume in three ways: • Tap the bottom left hand area of the Driving View. The last spoken instruction is repeated and the volume level is shown. Move the volume slider to adjust the volume. • In the Main Menu, tap Change preferences, then tap Volume preferences. Tap Test to check your changes.
Selecting a voice To change the voice being used by your TomTom, tap Voice preferences in the Preferences menu, then tap Change voice. Select a voice from the list. Your TomTom has two different kinds of voices: Voice preferences • Computer voices These are generated by your TomTom. They provide spoken instructions while you are driving and can pronounce street names and announce messages, traffic reports, weather reports, tips and tutorials. • Human voices These are recorded by an actor.
7. Using the car stereo Using the car stereo The car stereo uses the TomTom navigation device to display information, play videos, and show controls. Through your TomTom navigation device, you can control the following: • The radio • The audio CD/CD-ROM/DVD player • An iPod • Music stored on a USB stick For full details, see the owner’s manual included with the car stereo.
When you connect an iPod® or USB storage device and select one of these as the audio input source, your car stereo starts to play the first song on the iPod® or USB storage device. To select your iPod® or USB storage device, press the Source button on your car stereo until iPod or USB is shown on the display on your car stereo. To select the song to play, tap Select. You can then choose the songs you want to listen to. • Playlist - tap this button to select a playlist.
8. Browse map Browse map To look at the map in the same way as you might look at a traditional paper map, tap Browse map in the Main Menu. You can move the map by touching the screen and moving your finger across the screen. A The scale bar B Your current position. C GPS button Tap this button to center the map on your current position. D Options E The cursor F The Find button Tap this button to find specific addresses.
Position the cursor over a location on the map, then tap one of the following buttons: Tap this button to navigate to the cursor position. Your TomTom will calculate the route. Navigate there Tap this button to find a POI near the cursor position. For example, if you have found a restaurant to go to, you can search for a parking garage nearby. Find POI nearby Tap this button to call the location at the cursor position. This button is only available if your TomTom has the phone number for the location.
9. TomTom Map Share TomTom Map Share TomTom Map ShareTM is a free service that lets you make updates to your map and share those updates with other members of the TomTom Map Share community. If you find a street that has recently been blocked by traffic, you can use Map Share to update your map and then share the update with other Map Share members. You can use Map Share to send and receive map updates during the first year after the map’s release date.
• Updates that are reported to TomTom to be shown on the map after they are verified. These include, missing streets, errors in freeway entrances and exits and missing rotaries. This type of update is investigated by TomTom and once verified, is included in the next map release. These updates are therefore not shared with the Map Share community. Tip: If you cannot see the Map corrections button in the Main Menu, tap Show ALL menu options in the Preferences menu. Making a map update 1.
Receiving the latest map updates When you connect your TomTom to your computer, TomTom HOME automatically downloads any available map updates and sends any changes you have made, to the Map Share community. Changing my preferences for map updates Open Correction preferences to change the settings for TomTom Map Share. You can change the following settings: • Choose what types of updates you want to use on your maps. • Decide if you want to share your updates with others.
To make an update to your map, tap Map corrections in the Main Menu then tap Correct a map error. The following types of updates are shown. Tap this button to block or unblock a street. You can block or unblock the street in one or both directions. (Un)block street For example, to correct a street near to your current location, do the following: 1. Tap (Un)block street. 2. Tap Near you to select a street near your current location.
Tap this button to change the name of a street on your map. vabckc sdn vk fbks sdjv Edit street name For example, to rename a street near to your current location: 1. Tap Edit street name. 2. Tap Near you. 3. Select the street or section of a street you want to correct by tapping it on the map. The street you select is highlighted and the cursor shows the name of the street. 4. Tap Done. 5. Type the correct street name. 6. Tap Done. Tap this button to add a new Point of Interest (POI).
10. Help me! Help me! Help me! provides an easy way to navigate to emergency services centers and other specialist services and contact them by phone. For example, if you are involved in a car accident, you could use Help me! to call the nearest hospital and tell them your exact location. Tip: If you do not see the Help me! button in the Main Menu, tap Show ALL menu options in the Preferences menu.
Options Use your TomTom to find the location of a service and the contact details. • Emergency services Phone for help • Emergency breakdown services • Nearest police station • Nearest doctor • Nearest hospital • Nearest public transport • Nearest car repair services • Nearest dentist • Nearest pharmacy • Nearest vet Note: In some countries, information may not be available for all services. Use your TomTom to navigate your way by road to a service center.
Tap this button to read the British Red Cross First Aid guide. First Aid Guide Tap this button to read a selection of useful guides.
11. Favorites Favorites What are Favorites? Favorites are places that you often visit. You can create Favorites so that you don’t have to enter the address every time you want to navigate there. They don’t have to be places you especially like, just useful addresses. How can I create a Favorite? From the Main Menu, tap Add Favorite. Note: The button Add Favorite may not be shown on the first page of the Main Menu. Tap the arrow to open other pages in the Main Menu.
Select a Favorite location from a list of places you have recently used as destinations. Recent destination You can add a Point of Interest (POI) as a Favorite. Does it make sense to do this? Point of Interest If you visit a POI you particularly like, for example a restaurant, you can add it as a Favorite. To add a POI as a Favorite, tap this button, then do the following: 1. Narrow your choice of POIs by selecting the area where the POI is.
How can I use a Favorite? You will normally use a Favorite as a way of navigating to a place without having to enter the address. To navigate to a Favorite, do the following: 1. Tap the screen to bring up the main menu. 2. Tap Navigate to... 3. Tap Favorite. 4. Select a Favorite from the list. Your TomTom calculates the route for you. 5. When the route is calculated, tap Done. Your TomTom will immediately start guiding you to your destination with spoken instructions and visual instructions on the screen.
12. Points of Interest Points of Interest Points of Interest or POIs are useful places on the map. Here are some examples: • Restaurants • Hotels • Museums • Parking garages • Gas stations Showing POIs on the map 1. Tap Show POIs on map in the Preferences menu. Show POI on map 2. Select the POI categories to display on the map. Tap Find to search for a POI by name. 3. Tap Done. The POIs you have selected are shown as symbols on the map. Calling a POI Your TomTom knows the phone numbers for many POIs.
You can select one of these options: • POI near you - to choose from a list of POIs near to your current location. • POI in city - to find a POI in a particular town or city. • POI near Home - to choose from a list of POIs near to your Home location. You can select from a list of POIs which are along your route or close to your destination. Choose from one of these options: • POI along route • POI near destination Note: The last POI you viewed is also shown so that you can plan a route there more quickly.
Managing POIs Tap Manage POIs from the Preferences menu. Manage POIs Note: The Manage POIs button is only available when all menu buttons are shown. To show all menu buttons, tap Show ALL menu options in the Preferences menu. You can, for example, do the following: • Create your own POI categories and add POIs to them. • Set warnings when you get close to POIs.
Tap this button to add a POI. Add POI 7. You are asked to name the POI. 8. Select the POI category in which you want to add the POI. 9. Select the location of your POI from the list below. You can set your Home location as a POI. If you want to change your Home location, you can create a POI of the Home location before you change it. Home You can create a POI from a Favorite. Favorite 1 22 3 Address You can only create a limited number of Favorites.
Tap this button to create a POI by entering latitude and longitude values. Latitude Longitude Tap this button to make a POI of the current position of a TomTom Buddy. TomTom Buddy How can I set warnings for POIs? 1. Tap the screen to bring up the main menu. 2. Tap Change preferences. 3. Tap Manage POIs. Note: The Manage POIs button is only available when all menu buttons are shown. To show all menu buttons, tap Show ALL menu options in the Preferences menu. 4. Tap Warn when near POI.
13. Itinerary Planning Itinerary Planning What is an Itinerary? An Itinerary is a plan for a trip including more locations than your final destination. An Itinerary can include the following items: • Destination - a location on your trip where you want to stop. • Waypoint - a location on your trip you want to travel through without stopping. Here’s an example of an Itinerary: Destinations are shown using this symbol. Waypoints are shown using this symbol.
The Itinerary planning screen opens. At first, there are no items on the Itinerary. Itinerary planning Note: This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. 3. Tap Add and select a location. Tip: You can add items to your Itinerary in any order and rearrange the order later. Following an Itinerary When you use an Itinerary to navigate, the route will be calculated to the first destination on the Itinerary.
Tap this button to repeat part of your Itinerary. Your TomTom will navigate you to this item followed by the rest of the items in the Itinerary. This button is only shown if you have already visited this item. Mark ‘to visit’ Tap this button to move the item up the Itinerary. This button is unavailable if the item is at the top of the Itinerary. Move item up Tap this button to move the item down the Itinerary. This button is unavailable if the item is at the bottom of the Itinerary.
14. Hands-free calling Hands-free calling If you have a mobile phone with Bluetooth®, you can use your TomTom to make phone calls and send and receive messages. Note: Not all phones are supported or compatible with all features. For more information, go to www.tomtom.com/phones/compatibility. Connecting to Your Phone First you must establish a connection between your mobile phone and your TomTom. Tap Mobile phone in the Main Menu and then follow the instructions on the screen.
Not all phones can transfer their phonebook to your TomTom. For more information, visit www.tomtom.com/phones/compatibility. Making a Call Once you have established a connection with your phone, you can start making calls. 1. Tap Mobile phone in the Main Menu. 2. Tap Call. Note: Make sure that your phone is currently selected. The current phone is shown at the bottom of the screen. 3. Tap Number to enter a number to call. 4. Do one of the following: • Tap Home to call your Home location.
Mobile phone menu The available buttons are listed below: Tap this button to redial a telephone number using your mobile phone. REDIAL Tap this button to read or write a message. Read/Write message Tap this button to configre how your TomTom communicates with your mobile phone. Phone preferences Tap this button to dial a telephone number using your mobile phone. Call... Tap this button to load the contacts and phone numbers from your mobile phone onto your TomTom.
15. Preferences Preferences Hidden buttons and features When you first start using your TomTom, all the buttons are shown in the menu. The buttons for the more advanced features can be hidden. This is a useful option because you are unlikely to use certain features very often. Tap this button in the Preferences menu, to reduce the number of buttons that are shown. You might want to do this so that only frequently used buttons are shown.
Show POI on map Tap this button to set which categories for the Points of Interest (POIs) should be shown on the map: 1. Tap Show POIs on map in the Preferences menu. Show POI on map 2. Select the POI categories to display on the map. Tap Find to search for a POI category. 3. Tap Done. The POIs you have selected are shown as symbols on the map.
Voice preferences Tap Voice preferences to manage your TomTom voices. The following options are available: Voice preferences • Change voice - tap this button to change the voice that gives you instructions. A wide range of recorded human voices and computer voices are available. • Disable voice - tap this button to disable the use of voices. To enable voices, tap Enable. • Speech preferences - tap this button to set the situations when your TomTom will read instructions or warnings aloud.
Manage Favorites Tap this button to rename or delete Favorites. To find a Favorite quickly, tap Find, then start to type the name of the Favorite. As soon as the Favorite is shown in the list, you can select it. Manage Favorites Change Home location Tap this button to set or change your Home location. Change Home location Do I need to use my actual home address for the Home location? No. Your Home location can be a place you go often, for example, your office.
Manage POIs This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. Tap this button to do the following: • Set alerts for when you are near POIs. Manage POIs For example, your TomTom can tell you when there is a gas station nearby. • Create your own POI categories and add POIs to them. For example, you could create a category of POIs called “Friends”, and add all your friends’ addresses as POIs in the category.
Compass preferences This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. Tap this button to configure the compass. The following options are available: • None - the compass is not shown. Compass preferences • One with arrow pointing north - the arrow always points towards north and the direction you are moving is shown at the top of the compass.
Brightness preferences This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. Tap this button to set the brightness of the screen. Move the sliders to set the brightness separately for day map colors and for night map colors. Brightness preferences You can also set these options: • Turn brightness down when dark - your TomTom uses a light sensor to detect the background light level.
Status bar preferences This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. Tap this button to select the information shown on the status bar: • Remaining time - the estimated time left until you reach your destination. Status bar preferences • Remaining distance - the distance left until you reach your destination. • Current time • Arrival time - your estimated arrival time.
Quick menu preferences This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. Tap this button to choose up to six buttons to be used in the Quick menu. The Quick menu button enables easy access for your most commonly used buttons. Quick menu preferences The buttons you assign for use with the Quick menu, are shown in the Driving View. Guided tours This button may only be available if all menu options are shown.
Set units This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. Tap this button to set the type of units that will be shown for the following: • Distance Set units • Time • Latitude and longitude • Temperature • Air pressure Operate left-handed / Operate right-handed This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu.
Planning preferences This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. Tap this button to set the kind of route planned when you select a destination.
Set owner This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. Tap this button to enter your name and address as the owner of your TomTom and to change or delete a 4-digit password for your TomTom. Set owner Note: You can only change or delete a 4-digit password on your TomTom. You can create a 4-digit password for your TomTom using TomTom HOME: 1.
Start-up preferences This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. Tap this button to select what happens when your TomTom starts. The following options are available: Start-up preferences • Continue where I left off - your TomTom starts and shows the last screen that was shown when you turned off the device. • Show the Driving View - your TomTom starts and shows the Driving View.
Disable wireless data / Enable wireless data This button may only be available if all menu options are shown. To show all menu options, tap Show ALL menu options in the Preferences menu. Tap this button to block the reception of wireless data. You will still be connected to your mobile phone via Bluetooth and will still be able to receive and make hands-free calls. You will not be able to receive any data that uses a wireless data connection, such as TomTom Traffic.
Change language Tap this button to change the language used for all the buttons and messages you see on your TomTom. Change language You can choose from a wide range of languages. When you change the language, you are also given the opportunity to change the voice. Set clock Tap this button to select the type of clock that is shown and set the time. The easiest way to set the time is by tapping the Sync button. Your TomTom will then take the time from GPS information.
16. TomTom Traffic TomTom Traffic TomTom Traffic is a TomTom Service for receiving up-to-date traffic information. TomTom Traffic requires a wireless data connection (GPRS, EDGE, UMTS, CDMA). TomTom Traffic uses the most up-to-date information from the best local sources. For more information about subscribing see tomtom.com/services Setting up TomTom Traffic To use TomTom Traffic, you need to establish a connection between your mobile phone and your TomTom device.
Traffic information has not been updated for at least 15 minutes. Traffic information has not been updated for at least 30 minutes. Traffic information has not been updated for at least 45 minutes. Traffic information has not been updated for at least one hour. No connection is available between your TomTom device and the TomTom Traffic server.
Changing traffic preferences Use the Change Traffic preferences button to choose how traffic information works on your device. To change your traffic preferences, do the following: 1. Tap the TomTom Traffic button in the Main Menu on your device. Change Traffic preferences 2. Tap Change Traffic preferences.
In the example, the Traffic sidebar shows you that there are two incidents ahead. Both incidents are traffic jams, the first is 15km ahead and is expected to delay you by at least 51 minutes. To re-plan your route to avoid these incidents, tap the Traffic sidebar to open the TomTom traffic menu, then tap Minimize traffic delays. Making commuting to work easier The Home to work or Work to home buttons in the Traffic menu lets you check your route to and from work with one tap of a button.
To see if there is a quicker way home, you could now tap the Find alternative button and then tap Minimize traffic delays. Tip: You can let your device automatically look for alternative routes by selecting Automatically minimize delays after every traffic update in your Traffic preferences. Note: It is possible that the alternative route could be longer than your original one (even with its delays). If this is the case, you could always try using the Find alternative button again.
Traffic incident symbols and their meaning are shown below: Accident Road closed Road works Traffic incident One or more lanes closed Traffic jam Weather related symbols and their meaning are shown below: Fog Ice Rain Snow Wind Note: The incident avoided symbol is shown for any traffic incident that you avoid using TomTom Traffic. Traffic menu Either, tap the Traffic sidebar in the Driving View or tap TomTom Traffic in the Main Menu to open the Traffic menu.
Tap this button to get the latest traffic information straight away rather than waiting for an automatic update. Update traffic info Tap this button to disable TomTom Traffic. Disable Traffic Tap this button to view the guided tour on how to use TomTom Traffic. Help Tap this button to browse the map and see the traffic information displayed on the map. Browse map Tap this button to change your preferences for how TomTom Traffic works on your device.
17. Traffic information using RDS-TMC Traffic information using RDS-TMC The Traffic Message Channel (TMC) Information from the Traffic Message Channel (TMC) is used by your TomTom navigation device when your device is docked in the car stereo. The Traffic Message Channel (TMC) is not a TomTom Service. FM radio stations in several countries broadcast TMC information as part of their programming. TMC is also known as RDS-TMC traffic information.
To change your traffic preferences, do the following: 1. Tap the TomTom Traffic button in the Main Menu on your device. Change Traffic preferences 2. Tap Change Traffic preferences. You can change the following preferences: • Automatically minimize delays after every traffic update - if you select this option, your device automatically recalculates when new delays occur on your route.
2. Tap Show home-work traffic. 3. Tap Work to home. The route summary screen is shown, with the expected delay shown after the trip time. To see if there is a quicker way home, tap Find alternative then tap Minimize traffic delays. Tip: You can let your device automatically look for alternative routes by selecting Automatically minimize delays after every traffic update in the Traffic preferences. Checking traffic incidents in your area Get an overview of the traffic situation in your area, using the map.
• The estimated delay to the next traffic incident on your route. • The distance from your current location to the next incident on your route. An example of a Traffic sidebar is shown below. In the example, the Traffic sidebar shows you that there are two incidents ahead. Both incidents are traffic jams, the first is 15km ahead and is expected to delay you by at least 51 minutes.
Traffic menu Tap the Traffic sidebar in the Driving View to open the Traffic menu. The following buttons are available: Replans your route based on the latest traffic information. Minimize traffic delays Checks the traffic along your Home to Work route. Show homework traffic Tap this button to show areas of traffic congestion along your current route. Show traffic on route Shows an overview of traffic incidents on the map. Browse map Changes the settings for Traffic services.
18. Introducing TomTom HOME Introducing TomTom HOME TomTom HOME is a free application for your computer that helps you manage the contents of your TomTom device. Connect to HOME frequently to get the latest updates for your device. You can, for example, do the following: • Manage maps, voices, POIs and more. • Buy TomTom services and manage your subscriptions. • Update your TomTom with the latest software and services automatically. • Make and restore backups. • Read the full version of the user manual.
19. Addendum Addendum Important Safety Notices and Warnings Global Positioning System The Global Positioning System (GPS) is a satellite-based system that provides location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the Government of the United States of America, which is responsible for its availability and accuracy. Any changes in GPS availability and accuracy, or in environmental conditions, may impact the operation of your TomTom device.
SPECIAL NOTE REGARDING DRIVING IN CALIFORNIA AND MINNESOTA California Vehicle Code Section 26708 (a) (1) provides that “No persons shall drive any motor vehicle with an object or material placed, displayed, installed, affixed or applied upon the windshield or side or rear windows.” Drivers in California should not use a suction mount on their windshield, side or rear windows. Note: this section of the California Vehicle Code applies to anyone driving in California, not just California residents.
Important This equipment was tested for FCC compliance under conditions that included the use of shielded cables and connectors between it and the peripherals. It is important that you use shielded cables and connectors to reduce the possibility of causing radio and television interference. Shielded cables suitable for the product range can be obtained from an authorised dealer.
municipal waste. Please dispose of this product by returning it to the point of sale or to your local municipal collection point for recycling. C-tick N14644 Z468 This product displays the C-tick to show it complies with relevant Australian and New Zealand regulations. This Document Great care was taken in preparing this manual. Constant product development may mean that some information is not entirely up-to-date. The information in this document is subject to change without notice.
20. Copyright notices Copyright notices © 2008 TomTom International BV, The Netherlands. TomTom™ and the "two hands" logo are among the trademarks, applications or registered trademarks owned by TomTom International B.V. Our limited warranty and end user license agreement for embedded software apply to this product; you can review both at www.tomtom.com/legal © 2008 TomTom International BV, Niederlande.
comerciais registadas cuja proprietária é a TomTom International B.V. A nossa garantia limitada e contrato de licença de utilizador final relativas ao software incorporado dizem respeito a este produto; pode consultar ambos em www.tomtom.com/legal © 2008 TomTom International BV, Holland. TomTom™ og logoet med "de to hænder" er blandt de varemærker, produkter og registrerede varemærker, der tilhører TomTom International B.V.
alkalmazások és bejegyzett védjegyek közé tartozik. A korlátozott garancia és a benne foglalt szoftver végfelhasználói licencszerződése érvényes erre a termékre; melyeket a következő helyen tekinthet át: www.tomtom.com/legal © 2008 TomTom International BV, Holland. TomTom™ ja "kahe käe" logo kuuluvad nende kaubamärkide, rakenduste või registreeritud kaubamärkide hulka, mille omanikuks on TomTom International B.V.
© Swisstopo. © BEV, GZ 1368/2008. © Geonext/DeAgostini. © Norwegian Mapping Authority, Public Roads Administration / © Mapsolutions. © DAV. This product includes mapping data licensed from Ordnance Survey with the permission of the Controller of Her Majesty’s Stationery Office. © Crown copyright and/or database right 2008. All rights reserved. Licence number 100026920. Data Source © 1984 – 2008 Tele Atlas North America. Inc. All rights reserved. Canadian Data © DMTI Spatial.
