User manual

16
As you walk the hole towards the pin, your current distance from the first L200 marker on the
right-hand side of the watch screen decreases.
When you reach a layup marker, the layup marker disappears from the screen.
The default distances for the layup markers are 100, 150, 200.
Note: Keep moving Up to cycle through the Hazards, Layup or Green view screen, depending
on which are applicable for the current hole. Green view is always present.
Tip: If poor or a loss of signal occurs, the range values gray and display the last values that
were deemed to be good or accurate.
See also: Layup and green views
Layup and green views
As you approach the green, move Up or Down to swap between the layup screen and the green
view as shown below.
Once you have passed the last layup marker, the watch automatically shows only the view of the
green.
See also: Approaching the green using your watch