Mazda NB1 Reference Guide
Contents Read me first 7 Switching on and off ..........................................................................................................................7 Setting up............................................................................................................................................7 GPS reception .....................................................................................................................................7 Device not starting ...................
The Driving View 26 About the Driving View ....................................................................................................................26 The Driving View ..............................................................................................................................26 Driving View Symbols ......................................................................................................................27 Advanced Lane Guidance 28 About lane guidance ...........
Keyboard...........................................................................................................................................45 Make your own menu ......................................................................................................................45 Map colours ......................................................................................................................................45 Manage POIs..............................................................
Traffic 63 About traffic information ..................................................................................................................63 About TomTom Traffic .....................................................................................................................63 Safety Notice ....................................................................................................................................63 Using traffic information ........................................
Customer support 85 Getting help to use your navigation device ....................................................................................85 Status & information .........................................................................................................................85 Addendum 86 Copyright notices 89 Copyright notices .............................................................................................................................
Read me first Switching on and off Your Mazda NB1 switches on when your car engine starts and switches off automatically when you turn off your car's engine. Until a connection has been established between the car and the Mazda NB1, the screen shows audio-related information and the NAV button on the main display is inactive. In some situations when you start the car, the navigation device may restart. If this happens, press the NAV button.
Take care of your device It is important to take care of your device as follows: Your device is not designed for use in extreme temperatures and any such exposure may cause permanent damage. Do not open the casing of your device under any circumstances. Doing so may be dangerous and will invalidate the warranty. Important: If you sell your car, you should remove all personal information from your navigation device first.
The memory card About your memory card A memory card is supplied with your navigation system. It includes a map of your group of countries. Updates are regularly produced by TomTom, particularly for maps and services like speed cameras. These updates are only available for download by inserting your navigation system's memory card into a computer that is connected to the internet.
Tip: We recommend using a broadband internet connection whenever you connect to HOME. Installing TomTom HOME The steps below refer to Internet Explorer on Windows XP. If you're using another browser or operating system, visit tomtom.com/support for more information. To install TomTom HOME on your computer, do the following: 1. Connect your computer to the internet. 2. Click the link below to download the latest version of TomTom HOME: tomtom.com/getstarted 3.
2. Wait for TomTom HOME to start. 3. If HOME does not automatically check for updates, click Update my device in the HOME menu. Note: if you would like to install an application you downloaded previously, click Add Traffic, Voices, Safety Cameras etc. and then click Items on my computer. 4. If a new application is available, it is listed on the next screen. 5. Make sure the new application is selected, then click Download updates. HOME downloads the selected items. 6.
Safety Notice Some navigation devices contain a GSM/GPRS module which can interfere with electrical devices such as cardiac pacemakers, hearing aids and aviation equipment. Interference with these devices may endanger the health or life of you or others. If your device includes a GSM/GPRS module, do not use it near unprotected electrical units or in areas where the use of mobile telephones is prohibited, such as hospitals and aircraft.
The commander About the commander The commander is an input device located near the arm rest of your car in the central console. It has a central stick that you can move in the following ways: Push. Rotate left or right. Tilt up or down. Tilt left or right. The commander also has six buttons around the central stick. These are: AUDIO, NAV, PHONE, SETUP and (BACK). AUDIO, NAV, PHONE, SETUP have the same function as the buttons on the radio unit.
When focused on the map in the Driving View, tilt left to access the quick menu and the voice control microphone button. When focused on the map in the Driving View, tilt down to access the volume control in the centre panel of the status bar. To access the Driving View from the Main menu, tilt the stick down until you are focused on the Done button, then push in. To move between letters on the keyboard screen, tilt left or right. Use tilt up or down to move to the letter above or below.
Planning a route Planning a route Important: In the interest of safety and to reduce distractions while you are driving, you should always plan a route before you start driving. To plan a route on your Mazda NB1, do the following: 1. Tap the screen to open the Main Menu. 2. Tap Navigate to or Drive to. 3. Tap Address. You can change the country or state setting by tapping the flag before you select a city. 4. Enter the town or city name, or the postcode.
Streets with similar names are shown in the list while you type. When the correct street name appears in the list, tap the name to select the destination. 6. Enter the house number, then tap Done. 7. The location is shown on the map. Tap Select to continue or tap Back to enter another address. Tip: If you want your final destination to be a car park, tap Car park and select a location from the list of car parks close to your general destination. 8. When the new route is shown, tap Done.
To change your route, for example, to travel via a particular location or to select a new destination, tap Change route. Your device starts to guide you to your destination, using spoken instructions and on-screen directions. Route summary The route summary shows an overview of your route, the remaining distance to your destination and the remaining estimated journey time.
To view LIVE summary information, tap the LIVE tab on the route summary screen. Tap any of the panels for more detailed information. The LIVE tab panels show the following information: Traffic on route - tap this panel to view detailed information about traffic delays and other incidents on your route. Speed cameras or danger zones - tap this panel to open the Speed Cameras or Danger Zones menu. You can then report a speed camera or danger zone or change your settings for warnings.
Using arrival times You can set your Mazda NB1 device to ask you if you need to arrive at a particular time when you plan a route. Tap Status bar in the Settings menu, to enable or disable arrival time notifications. To enable arrival time notifications, select Leeway. Status bar After planning a route, tap YES to enter a preferred arrival time. Your device calculates your arrival time and shows you whether you will arrive on time. You can also use this information to work out when you need to leave.
Tap this button to select your destination from a list of places you have recently used as destinations. Recent destination Tap this button to navigate to a Point of Interest (POI). Point of Interest Tap this button to select a point on the map as your destination using the map browser. Point on map Tap this button to enter a destination using latitude and longitude values.
This button is shown while there is no planned route on your Mazda NB1. 3. Select the starting point for your journey in the same way that you would select your destination. 4. Set the destination for your journey. 5. If Route planning settings are set to Ask me every time I plan, select the type of route you want to plan: Fastest route - the route which takes the least time. Eco route - the most fuel-efficient route for your journey.
Tap this button to see all the traffic incidents on your route. Show traffic on route Note: This button is only shown if your device has either a traffic subscription or an RDS-TMC Receiver. Traffic information is not available in all countries or regions. For more information about TomTom traffic information services, go to tomtom.com/services.
Voice control Voice control There are two types of voice control. The first type is provided by Mazda and you can read about it in the guide that came with your car. The second type is provided by your navigation device and you can use it to plan routes and control other features of your navigation device. You do this by initially tapping the screen on the navigation device. About navigation device voice control Note: Voice control is not supported on all devices or in all languages.
A green bar means the device can hear your voice. A red bar means your voice is too loud for the device to recognise individual words. A grey bar means your voice is too quiet for the device to recognise individual words. For some phrases, your Mazda NB1 repeats what you say and asks for confirmation. Tip: For the best recognition of what you say, speak normally without trying to articulate words in an unnatural way.
Tip: Your device has either Navigate to or Drive to on the button in the Main Menu. When planning a route to an address using speech, say "Navigate to address" if the button shows Navigate to or "Drive to address" if the button shows Drive to. 3. Say the full address for your destination, for example, 112 James Street, London. Numbers can be pronounced naturally or one at a time. For example, 357 can be pronounced as "Three fifty seven" or "Three, five, seven". Your Mazda NB1 tells you what it heard. 4.
The Driving View About the Driving View When your Mazda NB1 navigation device starts for the first time, you are shown the Driving View along with detailed information about your current position. Tap the centre of the screen at any time to open the Main Menu. The Driving View 1. Zoom button - tap the magnifying glass to show buttons for zooming in and out. 2. Quick menu - to enable the quick menu, tap Make your own menu in the Settings menu. 3. Your current position. 4.
9. Navigation instruction for the road ahead and the distance to next instruction. If the second instruction is less that 150m after the first instruction, you see it shown immediately instead of the distance. Tap this part of the status bar to repeat the last voice instruction and to change the volume. You can also tap here to mute the sound. 10. The remaining journey time, the remaining distance and your estimated arrival time. Tap this part of the status bar to open the Route Summary screen.
Advanced Lane Guidance About lane guidance Note: Lane guidance is not available for all junctions or in all countries. Your Mazda NB1 navigation device helps you prepare for motorway exits and junctions by showing the correct driving lane for your planned route. As you approach an exit or junction, the lane you need is shown on the screen. Using lane guidance There are two types of lane guidance: Lane images To turn lane images off, tap Settings in the Main menu, then tap Advanced settings.
Tip: If no lane guidance is shown in the status bar and all lanes are highlighted, you can use any lane.
Changing your route Making changes to your route After you plan a route, you may want to change the route or even the destination. There are various ways to change your route without the need to completely replan the entire journey. To change the current route, tap Change route in the Main menu: Tap this button to change the current route. This button is only shown while there is a planned route on your device.
traffic information services, go to tomtom.com/services. Tap this button to change the current destination. Change destination When you change the destination, you are shown the same options and asked to enter the new address in the same way as when you plan a new route. Tap this button to avoid part of the current route. Avoid part of route You are shown a list of the street names on your route. When you tap one of the street names, your device calculates a detour to avoid the selected street.
3. Tap Travel via. Tip: You can also tap View map and then tap Travel via in the cursor menu. If your device supports Voice control, you also speak commands to add waypoints. 4. Choose the location for your waypoint from a choice of Home, Favourite, Address, Recent destination, POI, point on map, longitude/latitude, position of last stop or you can perform a search. On the route summary screen, a message confirms that the route is being recalculated to include the waypoint.
Your waypoint changes its position in the list and you are immediately returned to your list of waypoints. Tip: You cannot move an unvisited waypoint into a list of already visited waypoints. Deleting a waypoint To delete a waypoint, do the following: 1. Tap the screen to bring up the Main Menu. 2. Tap Change route. 3. Tap Travel via. You see a list of your waypoints. 4. Tap the waypoint you want to delete. You see a screen with the name of your waypoint at the top. 5. Tap Delete.
The waypoint is deleted and reinserted into the list of waypoints that haven't yet been visited.
View map About viewing the map You can view the map in the same way as you might look at a traditional paper map. The map shows your current location and many other locations such as Favourites and POIs. To view the map in this way, tap View map or View route in the Main menu. You view different locations on the map by moving the map across the screen. To move the map, touch the screen and drag your finger across the screen. To select a location on the map, tap the location on the map.
Tap a marker to centre the map on the location pointed to by the marker. You can also set your own marker. Tap the cursor button, then tap Set marker position to place a green marker at the cursor position. To turn markers off, tap Options, then Advanced and clear the Markers checkbox. 4. Options button 5. The cursor with street name balloon Tap the button in the street name balloon to open the cursor menu.
Position the cursor on a location on the map, then tap the arrow and then tap one of the following buttons: Tap this button to plan a route to the cursor position on the map. Navigate there Tap this button to view information about the location on the map such as the address. View location Tap this button to create your own green marker and place it at the cursor position. If a green marker exists, this button changes to Delete marker.
Map corrections About Map Share Map Share helps you correct map errors. You can correct several types of map error. To make corrections to your own map, tap Map corrections in the Services menu. Note: Map Share is not available in all regions. For more information, go to tomtom.com/mapshare. Correcting a map error Important: For safety reasons, do not enter the full details of a map correction while you are driving. Mark the location of the map error instead and enter the full details later.
on the map. 3. Select the street or section of a street you want to correct by tapping it on the map. The street you select is highlighted and the cursor shows the name of the street. 4. Tap Done. Your device shows the street and whether the traffic is blocked or allowed in each direction. Important: Not all features on this screen can be controlled using the commander. Use the touchscreen instead. 5. Tap one of the direction buttons to block or unblock the flow of traffic in that direction. 6. Tap Done.
Tap this button to change and report incorrect road turn restrictions. Change turn restrictions Tap this button to change and report the road speed limit. Change road speed Tap this button to add or remove a roundabout. Add or remove roundabout Tap this button to add a new Point of Interest (POI). For example to add a new restaurant near to your current location: 1. Tap Add missing POI. Add missing POI 2. Tap Restaurant in the list of POI categories. 3. Tap Near you. 4.
Correct house number Tap this button to correct the location of a house number. Enter the address that you wish to correct and then indicate on the map the correct location of that house number. Tap this button to edit an existing street. Once you have selected the street, you can select an error to report. You can select more than one type of error for a street. Existing street Tap this button to report a missing street. You have to select the start and end points of the missing street.
Sounds and voices About sounds and voices Your Mazda NB1 device uses sound for some or all of the following: Driving directions and other route instructions Traffic information Note: To use a TomTom traffic information service, you may need a subscription or a receiver. Traffic services are not supported in all countries or regions. For more information, visit tomtom.com/services.
Settings About Settings You can change the way your Mazda NB1 device looks and behaves. Most of the settings on your device can be accessed by tapping Settings in the Main menu. Note: Not all settings described here are available on all devices. 2D/3D settings Tap this button to set the default view of the map. To switch between 2D and 3D views while driving, tap the left side of the status bar in the Driving View.
Enable automatic zooming in 3D view - when this setting is selected, you see a wider view when you are on motorways and a major roads. You then zoom in automatically as you approach junctions. Show lane images - when this setting is selected, a graphical view of the road ahead shows which lane you need when you approach a junction or motorway exit. You can choose to see a split-screen lane image, a full-screen lane image or you can switch off lane images altogether.
To view or change an existing Favourite, tap one of the items in the list. To see more Favourites on the map, tap the left or right buttons. Keyboard Tap this button to select the keyboards that will be available for your use and the layout of the Latin keyboard. Keyboard You use the keyboard to enter names and addresses, such as when you plan a route or search for the name of a town or a local restaurant. Make your own menu Tap this button to add up to six buttons to your own personalised menu.
Add POI - tap this button to add a location to one of your own POI categories. Warn when near POI - tap this button to set your device to warn you when you are near selected POIs. Delete POI - tap this button to delete a POI. Edit POI - tap this button to edit one of your own POIs. Add POI category - tap this button to create a new POI category. Delete POI category - tap this button to delete one of your own POI categories.
Replanning settings Note: This setting is only available if your device has either a traffic subscription or an RDS-TMC Receiver. Traffic information is not available in all countries or regions. For more information about TomTom traffic information services, go to tomtom.com/services. Set whether you want your Mazda NB1 to replan the current route if a faster route is found while you are driving. This is useful if traffic builds up or clears further ahead on your route.
Tap Search and use the keyboard to search for a category name. 3. Select whether you want POIs to be shown in 2D or 3D views of the map. 4. Tap Done. Point of Interest locations are shown on the map as symbols. Status bar Note: Not all options may be available. Tap this button to select the information you want to see on the status bar: Status bar Horizontal - show the status bar at the bottom of the Driving view. Vertical - show the status bar on the right-hand side of the Driving view.
Tap this button to switch on voice guidance and hear spoken route instructions. Turn on Voice guidance Units Tap this button to set the units used on your device for features such as route planning. Units Version information Tap this button to find technical information on your device, such as the device serial number, application version and the map version. Version information You can also view the current status for GPS reception and your LIVE Services, if you have a subscription.
Points of Interest About Points of Interest Points of Interest or POIs are useful places on the map. Here are some examples: Restaurants Hotels Museums Parking garages Petrol stations Creating POIs Tip: For help on managing third party POIs, search for "Third party POIs" at: tomtom.com/support. 1. Tap the screen to open the Main menu. 2. Tap Settings. 3. Tap Manage POIs. 4.
Tap this button to create a POI from a Favourite. Favourite You might want to create a POI from a Favourite because you can only create a limited number of Favourites. If you want to create more Favourites you need to delete some Favourites. To avoid losing a Favourite, save the location as a POI before you delete the Favourite. Tap this button to enter an address as a new POI. When you enter an address, you can choose from four options.
Using POIs to plan a route When you plan a route, you can use a POI for the destination. The following example shows how to plan a route to a car park in a city: 1. Tap Navigate to or Drive to in the Main menu. 2. Tap Point of Interest. 3. Tap POI in city. Tip: The last POI you viewed on your Mazda NB1 device is also shown in the menu. 4. Enter the name of the town or city and select it when it is shown in the list. 5. Tap the arrow button to expand the list of POI categories.
For example, you can search for a cinema, call to book a ticket and then plan a route to the cinema. 1. Tap Navigate to or Drive to in the Main menu. 2. Tap Point of Interest. 3. Select how you want to search for the POI. For example, if you want to search for a POI on your route, tap POI along route. 4. Tap the type of POI you want to navigate to. For example, if you want to call a cinema to reserve a ticket, tap Cinema and then select the name of the cinema you want to call.
This means you can, for example, create a new POI category called Friends. You could then add all your friends' addresses as POIs in this new category. Tap the following buttons to create and maintain your own POIs: Add POI - tap this button to add a location to one of your own POI categories. Warn when near POI - tap this button to set your device to warn you when you are near selected POIs. Delete POI - tap this button to delete one of your own POI categories.
Help About getting help Tap Help in the Main menu to navigate to emergency services centres and other specialist services. For example, if you are involved in a car accident, you could use the Help menu to find the contact details for the nearest hospital, call them using a phone and tell them your exact location. Tip: If you do not see the Help button in the Main menu, tap Settings and then Safety settings. Clear the checkbox for Show only essential menu options while driving.
Tap this button to read a selection of guides, including a First Aid guide. Safety and other guides Tap this button to read a selection of guides relating to your navigation device.
Favourites About Favourites Favourites provide an easy way to select a location without the need to enter the address. They do not need to be favourite places, they can simply be seen as a collection of useful addresses. Creating a Favourite To create a Favourite, do the following: 1. Tap the screen to bring up the Main menu. 2. Tap Settings to open the Settings menu. 3. Tap Favourites. 4. Tap Add.
If you visit a POI you particularly like, for example a restaurant, you can add it as a Favourite. Point of Interest Tap this button to add your current location as a Favourite. For example, if you stop somewhere interesting, while you are there you can tap this button to create the Favourite. My location Tap this button to create a Favourite using the Map Browser. Select the location of the Favourite using the cursor, then tap Done.
Your device immediately starts guiding you to your destination with spoken instructions and visual instructions on the screen. Changing the name of a Favourite To change the name of a Favourite, do the following: 1. Tap the screen to bring up the Main menu. 2. Tap Settings to open the Settings menu. 3. Tap Favourites. 4. Tap the Favourite you want to rename. Tip: Use the left and right arrows to choose another Favourite from your list. 5. Tap Rename. 6. Type in the new name and then tap Done. 7. Tap Done.
Services About LIVE Services Note: LIVE Services are not available in all countries or regions, and not all LIVE Services are available in all countries or regions. You may be able to use LIVE Services when travelling abroad. For more information on available services, go to tomtom.com/services. The following LIVE Services may be available for your device. LIVE Services are subscription-based.
LIVE Services subscriptions Checking your LIVE Services subscription You can check the status of your subscriptions at any time. In the Main Menu, tap Services and then tap My Services. Your Mazda NB1 also warns you when your LIVE Services subscription is approaching the renewal date. For more information about LIVE Services subscription and payment terms, go to tomtom.com/services. Renewing your LIVE Services subscription using your device 1. In the Main Menu, tap Services and then tap My Services.
Using local search To find a location using local search and plan a route there, follow the steps below. In this example, you search for a supermarket near to your current position. 1. Tap the screen to bring up the Main Menu, then tap Navigate to or Drive to. Tip: You can also set up a quick menu button for local search by tapping Settings and then Make your own menu. Select Navigate to local search address or Drive to local search address. 2. Tap the Local Search button. 3. Tap Search near you. 4.
Traffic About traffic information You can receive traffic information in two ways: TomTom Traffic. Traffic Message Channel (RDS-TMC). Using traffic information, your Mazda NB1 device can automatically adjust your route to minimise any delays. Note: LIVE Services are not available in all countries or regions, and not all LIVE Services are available in all countries or regions. You may be able to use LIVE Services when travelling abroad. For more information on available services, go to tomtom.
The top of the traffic sidebar represents your destination and shows the total time delay due to traffic jams and other incidents on your route. The central section of the traffic sidebar shows individual traffic incidents in the order they occur on your route. The bottom of the traffic sidebar represents your current location and shows the distance to the next incident on your route. To make the traffic sidebar more readable some incidents may not be shown.
When you use either of these buttons, your device plans a route between your home and work locations and checks the route for possible delays. The first time you use Home to work, you must set your traffic home and work locations by doing the following: 1. Tap the traffic sidebar to open the Traffic menu. Note: If you already have a route planned, a summary of traffic incidents on your route is shown. Tap Options to open the Traffic menu. 2. Tap Show home-work traffic. 3.
The total includes any delays due to traffic incidents and those due to busy roads, with information provided by IQ Routes. Tap Minimise delays to check if you can reduce the delay. Tap Options to open the Traffic menu. Note: You can also access the Show traffic on route screen by tapping the traffic area of the LIVE Route summary tab. Tap the left and right arrow buttons to move through each incident in turn, viewing the details of each one.
The map shows traffic incidents in the area. 4. Tap on any traffic incident to get more information. A screen is shown that gives you detailed information about the incident you chose. To display information about surrounding incidents use the left and right arrows at the bottom of this screen. Changing traffic settings Use the Traffic settings button to choose how traffic information works on your navigation device. 1. Tap the traffic sidebar then tap Options to open the Traffic menu. 2.
Symbols shown in a red triangle are weather related. Your device does not replan to avoid these warnings. Traffic incident symbols: Accident Road works One or more lanes closed Road closed Traffic incident Traffic jam Weather related symbols: Fog Rain Wind Ice Snow Note: The incident avoided symbol is shown for any traffic incident that you avoid using a traffic service.
Tap this button to re-plan your route based on the latest traffic information. Minimise traffic delays Tap this button to calculate the quickest route from your home location to your place of work and back. Show home-work traffic Tap this button for an overview of traffic incidents along your route. Tap the left and right buttons for more detailed information about each incident. Show traffic on route Tap Minimise delays to replan your route and avoid the traffic incidents that are shown on the map.
Speed Cameras Important Important: If you hear beeps and see no message on your screen, this is because you are in radio mode and the beeps are coming from your navigation device. The beeps are warning sounds given by the Speed Camera service to warn you of the presence of a speed camera. About Speed Cameras Note: LIVE Services are not available in all countries or regions, and not all LIVE Services are available in all countries or regions. You may be able to use LIVE Services when travelling abroad.
Changing the way you are warned To change the way your Mazda NB1 warns you about speed cameras, tap the Alert settings button. Alert settings You can then set how close you want to be to a speed camera before you are warned and what type of sound will be played. For example, to change the sound that is played when you approach a fixed speed camera, do the following: 1. Tap Services in the Main Menu. 2. Tap Speed Cameras. 3. Tap Alert settings. A list of speed camera types is displayed.
Restricted road camera - located on a minor road that reduces traffic on a larger road Other camera Mobile camera hotspot Average speed check Accident black spot Bi-directional speed camera Ungated railway crossing Mobile speed camera Report button To show the report button in the Driving View, do the following: 1. Tap Services in the Main Menu. 2. Tap Speed Cameras. 3. Tap Show report button. 4. Tap Back.
Tip: To hide the report button, tap Hide report button in the Speed Cameras menu. Reporting a new speed camera while on the move To report a speed camera on the move, do the following: 1. Tap the report button shown in the Driving View or in the quick menu to record the location of the camera. If you tap the report button within 20 seconds of receiving a speed camera warning, you get the option to add a camera or remove a camera. Tap Add camera. 2.
These are the different types of fixed speed camera: This type of speed camera checks the speed of passing vehicles. Speed camera This type of camera checks for vehicles breaking traffic rules at traffic lights. Traffic light camera This type of camera monitors traffic at toll road barriers. Toll road camera This type of speed camera checks the average speed of vehicles between two fixed points. Average speed check This type of camera checks traffic on roads where access is restricted.
Intermediate warning - type 1 Once in the speed check zone, if you are not speeding and have already received a start of zone warning, you see a visual warning in the Driving View. This reminds you that you are still in the speed check zone. Intermediate warning - type 2 Once in the speed check zone, if you are driving faster than the permitted speed and have already received a start of zone warning, you see a visual warning in the Driving View indicating the maximum permitted speed.
Tap this button to enable the report button. The report button is shown in the Driving View or in the quick menu. Show report button When the report button is shown in the Driving View, this button changes to Hide report button.
Danger Zones About danger zones Since 3rd January 2012, it has been illegal to receive warnings about the position of fixed or mobile speed cameras when you are driving in France. To be compliant with this change in French law, all types of speed camera locations are no longer reported but instead, areas of danger are indicated as zones. In France, TomTom terminated the Speed Cameras service and introduced a new service called TomTom Danger Zones.
Report button Tap this button in the Driving View to report a danger zone. A confirmation screen appears. Tap Yes to confirm the danger zone. A Thank you icon is shown on the screen. The location is reported to TomTom and shared with other users. Note: It is not possible to remove a danger zone. Reporting a new danger zone while on the move To report a danger zone while on the move, do the following: 1.
Tap this button to enable the report button. The report button is shown in the Driving View or in the quick menu. Enable report button When the report button is shown in the Driving View, this button changes to Disable report button.
Weather About Weather Note: Only available on LIVE devices. The TomTom Weather service provides detailed weather reports and 5-day weather forecasts for towns and cities. The information is provided by local weather stations and is updated hourly. Note: For more information on available services, go to tomtom.com/services. Requesting a weather report To request a weather report for a specific location, such as the town or city for your final destination, do the following: 1. Tap Services in the Main Menu.
Tap this button to select a Favourite location. Favourite Tap this button to enter an address. Address Tap this button to select a location in a list of recently used destinations. Recent destination Tap this button to select a location using a local search with TomTom Places. Local search Tap this button to select a Point of Interest (POI). Point of Interest Tap this button to select your current location. My Location Tap this button to select a point on the map.
TomTom HOME About TomTom HOME Using TomTom HOME you can register and manage your Mazda NB1 to receive free updates and buy new services. It's a good idea to connect frequently to HOME so you can do the following: Download for free the most recent map available for your device, if you connect to TomTom HOME within 60 days of buying your device. Download for free updates for your device, including Map Share updates and other services included with your product.
Note: If you have more than one TomTom device, you need a separate MyTomTom account for each device. If you have a MyTomTom account, you can access the following benefits online using HOME or by using the MyTomTom section of tomtom.com: Services - click Services on the TomTom website to subscribe to services such as real-time traffic and safety camera information.
Introducing HOME help In the TomTom HOME Help topics you can find a lot more information about how HOME can help you to manage contents and services on your navigation device. You can also get help on the following: Initialising a memory card Using a card reader Updating your device-account combination The TomTom Route Planner Note: The TomTom Route Planner does not support the sending of planned routes to every model of TomTom navigation device.
Customer support Getting help to use your navigation device You can get further help by going to tomtom.com/support. For warranty information, go to tomtom.com/legal. Status & information Tap this button to open the Status & information menu. Status & Information fthTap this button to view technical information about your device, such as your serial number for your device and the version of the main TomTom application. Version information Tap this button to see the current status for GPS reception.
Addendum Important Safety Notices and Warnings Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) The Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) systems are satellite-based systems that provide location and timing information around the globe. GPS is operated and controlled under the sole responsibility of the Government of the United States of America, who are responsible for its availability and accuracy.
CE marking This equipment complies with the requirements for CE marking when used in a residential, commercial, vehicular or light industrial environment, achieving all the appropriate provisions of the relevant legislation in the EU. R&TTE directive Hereby, TomTom declares that TomTom products and accessories are in compliance with the essential requirements and other relevant provisions of the EU Directive 1999/5/EC. The declaration of conformity can be found here: tomtom.com/legal.
Exposure limits This device complies with radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation. This document Great care was taken in preparing this document. Constant product development may mean that some information is not entirely up to date. The information in this document is subject to change without notice.
Copyright notices 89
Copyright notices © 2013 TomTom N.V., The Netherlands. TomTom®, and the "two hands" logo, among others, are Trademarks owned by TomTom N.V. or one of its subsidiaries. Please see tomtom.com/legal for warranties as well end user license agreements applying to this product, as amended from time to time. Ordnance Survey © Crown Copyright Licence number 100026920. Data Source © 2013 TomTom All rights reserved. Some images are taken from NASA’s Earth Observatory.
The GPL/LGPL software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. You can obtain the complete corresponding source code from us for a period of at least three (3) years from delivery of the product. Upon request, we will send you a CD with the corresponding source code.
