TomTom Rider User Manual 16.
Contents Welcome to navigation with TomTom 7 What's new 8 New in this release ................................................................................................ 8 TomTom videos .................................................................................................... 8 Using your Rider 10 Mounting on a motorcycle ...................................................................................... 10 Using the anti-theft solution ..............................................
What's on the screen 34 The map view..................................................................................................... 34 The guidance view ............................................................................................... 35 The route bar ..................................................................................................... 37 Distances and the route bar ............................................................................... 38 The quick menu .......
Planning a route to a POI using search ....................................................................... 70 Planning a route to a POI using online search .............................................................. 72 Planning a route using the map ............................................................................... 74 Planning a route using My Places ............................................................................. 75 Planning a route using coordinates .......................
Creating a map change report from a marked location .................................................. 106 Types of map change ........................................................................................... 107 Speed Cameras 109 About speed cameras .......................................................................................... 109 Crossing into another area or country ...................................................................... 109 Speed camera warnings ..................
Addendum 129 Copyright notices 134 6
Welcome to navigation with TomTom This Reference Guide explains all you need to know about your new TomTom Rider. If you want a quick read of the essentials, we recommend that you read the Using your Rider chapter. This covers installation, planning a thrilling ride and all the main features of your device. Get going covers switching on, setting up and charging. After that, you will probably want to connect to TomTom services and you can read all about that in the Connecting to TomTom services chapter.
What's new New in this release Version 16.1 Rider 40, Rider 400, Rider 410 Make and receive calls hands-free As well as receiving incoming calls, you can now make calls to contacts in your smartphone's contacts list and to recent contacts from your TomTom Rider. When you connect your phone to your Rider using Bluetooth, your contacts are shown on your Rider. To learn more go to Connecting and disconnecting a phone and Hands-free calling in this guide.
Using MyDrive UK English: www.youtube.com/watch?v=PIs5tGFhQIA French (France): www.youtube.com/watch?v=lYpPDxxXSwk Spanish (Spain): www.youtube.com/watch?v=HkZqdD5MkHI German: www.youtube.com/watch?v=Skg6PWMbRxI Italian: www.youtube.com/watch?v=AybGRzpgu1s USA ONLY - Getting traffic on a smartphone-connected device us.support.tomtom.com/app/content/name/Connect/page/3 New products TomTom Bandit (English): www.youtube.
Using your Rider Mounting on a motorcycle 1. Attach the RAM™ mount kit to your motorcycle. 2. Fix the holder to the mount and connect the wires to your motorcycle's wiring system. Important: The red POS (+) contact needs to be connected to the motorcycle's wiring loom at a point between the ignition and the +12V battery supply. The black NEG (-) wire needs to be connected to the motorcycle's wiring loom at a point between the ignition and the -(GND) battery supply.
Do not overtighten nuts and screws. You may crack parts of the mount kit or damage your handlebars if you overtighten nuts or screws. If you are using the u-bolt, don’t forget to put the rubber caps provided over the exposed threads. Important: Damage due to modifications, improper installation, road hazards or accident, are not covered. Neither RAM nor TomTom shall be liable for any injury, loss, or damage, direct or con-sequential, arising out of improper installation, or inability to use product.
A RAM lock for the mount. This lock prevents the unscrewing of the RAM arm from the motorcycle. A lock for the TomTom Rider itself. This lock prevents the disconnection of the TomTom Rider from the dock. Important: Both locks have keys so you need to make sure that you keep these two extra keys with you at all times! To use the anti-theft solution, do the following: 1. Lock the RAM mount to your motorcycle as shown below. Note: Make sure you use the longer screws provided with your Rider lock.
2. Lock your TomTom Rider to prevent removal from the mount. Unscrew the wingnut from the RAM arm and attach the RAM lock. Installing in your car If your box contains a car mount, use the supplied mount to install your TomTom Rider in your vehicle. Read the instructions about positioning your device before you install your Rider. If your box contains a car mount, install your Rider by doing the following: 1. Connect the supplied USB cable to the mount.
5. Press the suction cup of the mount firmly against your windscreen. 6. Turn the grip near the base of the mount in a clockwise direction until you feel it lock. 7. Place your Rider in the mount, making sure that it clicks into place. Tip: With the High-Speed Dual Charger you can charge your TomTom Rider and smartphone at the same time. Bluetooth Connections Your TomTom Rider use Bluetooth to connect to your smartphone and headset. Select Settings in the Main Menu, then select Bluetooth Connections.
Hands-free calling Use hands-free calling to receive incoming calls using your device. Select Hands-free calling, then select Search for phone and follow the instructions. See also: Receiving hands-free calls. Network Connect your device to TomTom services using a Bluetooth connection on your smartphone. Select Network, then select a phone or search for a phone and follow the instructions. See also: Connecting to TomTom services.
3. From the Main Menu, select Settings. 4. Select Bluetooth Connections. 5. Select Headset, then select Search for Headset and follow the instructions to establish the connection. 6. Attach your headset to your helmet. Make sure you position the microphone correctly. For best results, don’t position the microphone directly in front of your mouth, position it just to the side of your mouth. An image of the parts of a typical headset is shown below: 1. 2. 3. 4. 5. 6. 7.
3. Select Bluetooth Connections. 4. Select Hands-free calling. 5. If you have not yet connected a headset, select Search for Headset and follow the instructions to establish the connection. 6. Select Search for Phone and follow the instructions to establish the connection. When your phone is connected, your Rider imports your call history and phone contacts. Disconnecting your phone You can disconnect your phone in the following ways: Switch off Bluetooth on your phone.
Making a hands-free call to a recent contact 1. In the Main Menu select Phone. Your recent contacts list is shown on your Rider. 2. Select a recent contact from the list. Your contact and the phone number are shown on your Rider. 3. Select the telephone button to call your contact. 4. Select the red button to end the call. Making a hands-free call to a contact 1. In the Main Menu select Phone. Your phone contacts list is shown on your Rider. 2.
Plan a Thrill Select this button to plan a thrilling ride for a roundtrip or to a destination. My Routes Select this button to show your saved routes, recorded routes and imported routes. Add Home Select this button to ride to your home location. If this button is not included in your main menu, go to My Places to set up your home location. Ride Home Add Work Select this button to ride to your work location.
Start Recording My Places Parking Petrol Station Connected Services Trip Statistics Select this button to start or stop recording a track. Select this button to show your saved places. Select this button to find car parks. Select this button to find petrol stations. Select this button to see the status of your connection to the internet. Select this button to see trip statistics about how far you've been riding, how long you've been riding, and also at what speed.
1. To select the first letter "p", tap the "pqrs" key once. Tip: To select another letter from the same key, for example, "p" followed by "r", you need to wait for half a second in between selecting letters. 2. To select the second letter, for example "q", tap the "pqrs" key twice in rapid succession. 3. To select the third letter, for example, "r", tap the "pqrs" key three times in rapid succession. 4. To select the fourth letter "s", tap the "pqrs" key four times in rapid succession.
A thrilling route is a trip that includes interesting or challenging roads and uses as few motorways as possible. You can choose the level of turns included in your ride, and also the degree of hilliness. Tip: As Plan a Thrill is for creating instant routes, thrilling routes cannot be saved in My Routes. Tip: Thrilling routes are round trips by default but you can plan a route to a destination if you choose.
Your Rider plans a thrilling round trip route through your chosen stops. Tip: Select the pop-up menu button to reorder your stops. 6. Select the level of turns and the degree of hilliness for your thrilling route. Select this button to choose one of three settings for turns. Select this button to choose one of three settings for hilliness. Your Rider plans a thrilling round trip route with turns and hills through your chosen stops. 7. When you have planned your thrilling route, select Ride.
3. Select a location by pressing and holding the screen for about one second. 4. Select the destination button. Your Rider plans a thrilling route to your chosen destination. 5. If you want to add more stops to your route, move the map and select more stops. Your Rider plans a thrilling route through your chosen stops to your destination. Tip: Select the pop-up menu button to reorder your stops. 6. Select the level of turns and the degree of hilliness for your thrilling route.
Select one of the three tabs to see statistics for today's riding, for your current trip and for all-time. Tip: All-Time are the statistics that have been collected since the device was purchased and first switched on. Tip: A dot is included in large distances, for example, 20047,64 kilometres is shown as 20.047,6 km. Statistics for your current trip To see statistics for the trip you are riding now, select the Since --/--/-- tab.
You see the screen shown below with large buttons and a volume control: Tip: When wearing gloves, select the plus (+) and minus (-) buttons underneath the volume slider to change the volume, instead of trying to move the slider with gloves on. Installing Tyre Pro You can use Tyre Pro® to search, create and edit routes on your computer before you upload them to your TomTom Rider. To get free access to Tyre Pro®, follow the steps below: 1. Go to tomtom.com/getstarted and select your country. 2.
Settings Bluetooth Connections Select Settings in the Main Menu, then select Bluetooth Connections. Your Rider can use the following Bluetooth connections: Headset - Connect a Bluetooth headset to hear spoken instructions and warning sounds, and for hands-free calling. Hands-free calling - Connect a Bluetooth headset and your smartphone so you make hands-free calls using your phone. Network - Connect your Rider to your smartphone's internet connection so you can get TomTom Services.
Get going Positioning the device Be careful where you install your Rider. The Rider shouldn't block or interfere with any of the following: Your view of the road. The controls in your vehicle. Your rear-view mirrors. The airbags. You should be able to reach your Rider easily without leaning or stretching. In a car, you can attach your Rider to the windscreen or side window or you can use a Dashboard Mount Disk to attach the mount to your dashboard.
Setting up Note: The language you choose will be used for all text on the screen. You can always change the language later in Language and Units in the Settings menu. When you first switch on your TomTom Rider, you have to answer a few questions to set it up. Answer the questions by touching the screen. GPS reception When you first start your TomTom Rider, it may need a few minutes to determine your position. In future, your position will be found much faster.
Device not starting In rare cases, your TomTom Rider may not start correctly or may stop responding to your taps. First, check that the battery is charged. To charge the battery, connect your Rider to the car charger. It can take 3 - 5 hours to fully charge the battery depending on the type of device. If this does not solve the problem, you can perform a reset. To do this, press and hold the On/Off button until your Rider begins to restart.
Connecting to TomTom services About TomTom services TomTom services give you real-time information about traffic and speed cameras on your route. Smartphone Connected devices use your existing smartphone data plan to access TomTom Traffic as well as other services like TomTom Speed Cameras by connecting to your smartphone using Bluetooth®. Check tomtom.com/connect for more information. To get TomTom services on your Rider, you need the following items: Any Rider.
Note: Some mobile service providers don't allow their users to use a PAN. If your phone doesn't have the PAN function, you should contact your service provider for more information. Please check the user guide for your phone if you are having trouble finding the settings. For more help, go to tomtom.com/connect. Connect to TomTom services using your smartphone To connect your Rider to your phone, do the following: 1. Select TomTom Services in the Main Menu. 2. Select Network status. 3.
Bluetooth connected. Your device is connected to your phone. If you want to connect using another phone, you must turn on Personal Area Network (PAN) and Bluetooth on that phone, then let your device search for the phone. Connect to TomTom services using a different smartphone 1. Follow the instructions on your device about switching on a Personal Area Network on your phone. 2. Switch on Bluetooth on your phone. 3. Select Bluetooth Connections in the Settings Menu. 4. Select Network. 5.
What's on the screen The map view The map view is shown when you have no planned route. Your actual location is shown as soon as your Rider has found your GPS location. You can use map view in the same way as you might look at a traditional paper map. You can move around the map using gestures, and zoom using the zoom buttons.
1. Back button. This button returns the map to an overview of your whole route or, if no route is planned, moves the map to put your current location at the centre. 2. Switch view button. Select the switch view button to change between the map view and the guidance view. When in map view, if you are driving, the small arrow rotates to indicate your direction of travel relative to north, with north being up. 3. Zoom buttons. Select the zoom buttons to zoom in and out. 4. Current location.
The guidance view is normally in 3D. To show a 2D map with the map moving in your direction of travel, change the 2D and 3D default settings. Tip: When you have planned a route and the 3D guidance view is shown, select the switch view button to change to the map view and use the interactive features. When your Rider starts after sleeping and you have a route planned, you are shown the guidance view with your current location. 1. Switch view button.
6. Speed panel. This panel shows the following information: The speed limit at your location. Your current speed. If you drive more than 5 km/h or 3 mph over the speed limit the speed panel turns red. If you drive less than 5 km/h or 3 mph over the speed limit the speed panel turns orange. The name of the street you are driving on. 7. Current location. This symbol shows your current location. Select the symbol or the speed panel to open the quick menu.
type of incident and the delay in minutes. Select a symbol to see more information about a stop, an incident or a speed camera. If a symbol is shown on top of another symbol, selecting the symbols zooms in on the route bar to show each symbol separately. You can then select a symbol. The total time delay due to traffic jams, weather, and other incidents on your route, including information provided by IQ Routes, is shown above the symbols. For a complete list of incident types, see Traffic incidents.
The following buttons and symbols are available in the Main Menu screen, in addition to the navigation buttons: Select this button to open the Settings Menu. Select this button to open the Help Menu. The Help Menu contains help about using your Rider, together with other information about your device, for example, map version, device serial number and legal information. Select this button to reorder the buttons in the Main Menu. Select this button to return to the previous screen.
This button shows that you will not hear voice instructions. Select this button to switch on voice instructions. This button shows that the display is using day colours. Select the button to reduce the brightness of the screen and display the map in darker colours. When driving at night or when driving through a dark tunnel, it is easier to view the screen and less distracting for the driver if the brightness of the screen is dimmed.
Flick Flick the tip of a single finger across the screen. Example of when to use this: Scrolling a big distance on the map. Tip: Flick isn't available on all devices. Press and hold Put one finger on the screen for more than 0.5 second. Example of when to use this: Opening the pop-up menu for a place on the map. Pinch to zoom Touch the screen with your thumb and a finger. Move them apart to zoom in or move them together to zoom out. Example of when to use this: Zooming in and out on the map.
Traffic About TomTom Traffic TomTom Traffic is a TomTom service providing real-time traffic information. In combination with IQ Routes, TomTom Traffic helps you plan the optimum route to your destination taking into account the current local traffic conditions and the weather. Your TomTom Rider regularly receives information about the changing traffic conditions.
Tip: To quickly remove a stop, select it in the route bar and use the menu. Petrol stations that are directly on your route. TomTom Traffic including heavy rain or snow. TomTom Speed Cameras and Danger Zones. Rest stops directly on your route. You can choose the information you see on your route. The symbols are in the order that they occur on your route. For traffic incidents, the symbol for each incident alternates between showing the type of incident and the delay in minutes.
Tip: Select an incident on the map to see more detailed information. 1. Traffic incident that affects your route in your direction of travel. A symbol or number at the start of the incident shows the type of incident or the delay in minutes, for example 5 minutes. The colour of the incident indicates the speed of traffic relative to the maximum allowed speed at that location, with red being the slowest. The stripes on the traffic jam are also animated to show the speed of the traffic, where appropriate.
To get more information about an incident, select an incident in the route bar. The map opens zoomed in on the incident and an information panel opens showing detailed information about the traffic incident. The information shown includes: The type of traffic incident - general, accident, road works, lane closure or weather such as heavy rain or snow. The severity of the incident - slow traffic, queuing traffic or stationary traffic. The delay time. The length of the incident.
Weather symbols: Wind Rain Fog Snow Ice Approaching a traffic jam warning A warning is given as you approach a traffic jam. You are warned in several ways: A warning symbol is shown in the route bar. The route bar zooms in to the start of the traffic jam. Your distance to the start of the traffic jam is shown in the route bar. The colour of the road on the route bar changes to orange or red, depending on the severity of the traffic jam.
A new route is found that avoids the traffic jam. Avoiding a traffic jam using the map 1. On the map view, zoom in and select the traffic jam that is on your route. The traffic jam with an information panel is shown on the map. 2. Select the pop-up menu button. 3. Select Avoid. A new route is found that avoids the traffic jam. Advanced Lane Guidance Note: Lane guidance is not available for all junctions or in all countries.
Syncing using TomTom MyDrive About TomTom MyDrive TomTom MyDrive is the easy way to set a destination, share locations and favourites, and save your personal navigation information. MyDrive synchronises your TomTom Rider using your TomTom account. You can use MyDrive in a web browser on a computer or as a mobile app on a smartphone or tablet. Important: To use TomTom MyDrive you need a compatible navigation device.
Setting a destination using MyDrive When you are logged in to MyDrive using a web browser or the MyDrive app, you can select your destination on the map and send it to your navigation device. When your navigation device is logged in to your TomTom account, your device syncs with MyDrive and receives the destination. 1. In a web browser or using the MyDrive app, log in to your TomTom account. 2. On the map, select a destination.
2. Move your cursor left until it changes into a hand symbol. 3. Click and drag each stop or the destination to the order you want to drive them. Each time move a stop or destination, your route is recalculated with the stops in the changed order. The last stop on the list becomes your destination. Showing a planned destination in MyDrive When you plan a route on your Rider, the destination is synced with your TomTom account.
Finding and syncing locations using MyDrive When you are logged in to TomTom MyDrive, you can find locations in MyDrive and sync them with your Rider My Places locations. 1. In a web browser or using the MyDrive app, log in to your TomTom account. 2. On the map, select a destination. Tip: You can search for a destination or you can move the map and select a destination. You can also select a destination from your My Places list. 3.
To delete a POI list, do the following: 1. 2. 3. 4. In a web browser, log in to your TomTom account. In the My Places menu, select POI Files . Select the POI file you want to delete, then select Delete. Make sure you are logged in to MyDrive on your Rider. The POI list is removed from your My Places list. Importing a track GPX file GPX files (GPS exchange format) GPX files contain a very detailed recording of a route, including any off-road locations.
Saving and restoring your personal navigation information When you are logged in to MyDrive on your Rider, your personal navigation information is continuously and automatically saved to your TomTom account. If you reset your Rider, or log in to MyDrive on a different device, your saved personal navigation information is restored to your Rider or the different device. The following personal navigation information is saved to your TomTom account: MyDrive destinations.
Using Quick Search About search You use search to find a wide range of places and then navigate to them. You can search for the following: A specific address, for example, type in 123 Oxford Street, London. A partial address, for example, type in Oxford st Lon. A type of place, for example, type in petrol station or restaurant. A place by name, for example, type in Starbucks. A postcode, for example, type in W1D 1LL for Oxford Street, London.
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alternatively, you can search for a specific POI, for example "Rosie's Pizzeria". Note: When searching, the whole map is searched.
6. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address and email. 7. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
3. Use the keyboard to enter the name of the POI you want to find, then press the Search button on the keyboard. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alternatively, you can search for a specific POI, for example "Rosie's Pizzeria".
A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a add a stop to a route that you have already planned. Tip: You can save a route using My Routes.
Whole map Select this option to search the whole of your current map with no limit to the search radius. Your current location is the centre of the search. The results are ranked by exact match. Near me Select this option to search with your current GPS location as the search centre. The results are ranked by distance. In town or city Select this option to use a town or city as the centre for your search. You need to enter the town or city name using the keyboard.
Tip: To see more results, hide the keyboard or scroll down the results list. Tip: You can switch between seeing the results on the map or in a list by selecting the list/map button: When you select an address from the list of search results, you can choose to show it on the map, add a crossroad or plan a route to that chosen location. To get an exact address you can add the house number. If you show the result on the map, you can use the pop-up menu to add the location to My Places.
Note: The best search results are shown on the map. When you zoom in, the lower ranked search results are gradually shown. About postcodes When searching using a postcode, your results depend on the type of postcode used in the country that you are searching in. The following types of postcodes are used: Postcodes that navigate you to a street or part of a street.
Court house Cash dispenser Legal - Solicitors Financial institution Legal - other services Food services Convenience store Fast food restaurant Restaurant Chinese restaurant Accommodation Hotel or motel Luxury hotel Camping ground Economy chain hotel Emergency services Hospital or polyclinic Dentist Police station Veterinarian Doctor Fire station Car-related services Outside parking Petrol station Parking garage Car wash Car dealer Vehicle inspection centre 62
Rental car facility Electrical car charging point(s) Rental car parking Car repair facility Other services Embassy Pet services Government office Telecommunication Company Community service Post office Pharmacy Shopping centre Beauty services Tourist information office Shop College or university School Library Convention centre Casino Winery Theatre Tourist attraction Cinema Zoo Education Leisure 63
Concert hall Amusement park Museum Exhibition centre Opera Cultural centre Nightlife Leisure centre Children's Farm Sport Playing field Swimming pool Mountain peak Water sports Beach Tennis court Park or recreation area Ice skating rink Yacht basin or marina Sports centre Stadium Golf course Church Place of worship Railway station Mountain pass Religion Travel 64
Airport Scenic or panoramic view Ferry terminal Postcode Note: Not used in all countries.
Planning a route Using suggested destinations What are suggested destinations? Your TomTom Rider can learn your daily driving habits to saved favourite Places and it can also suggest destinations when you start the device from sleep mode, for example, when driving to Work in the morning. Getting ready for suggested destinations Before you get your first suggested destination, your device needs some time to learn about your habits.
1. Select the Main Menu button to open the Main Menu. 2. Select Search. The search screen opens with the keyboard showing. 3. Use the keyboard to enter the name of the place you want to plan a route to. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for an address, town, city, postcode or mapcode.
5. Select an address suggestion. 6. Enter the house number if you have one and haven't entered it already. Tip: If you enter a house number that is not found, then the number appears red. The nearest house number that is found is shown in the Drive button. You can enter a new house number, or you can select Drive/Ride to drive to the nearest house number. 7. Select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins.
2. Select Search. The search screen opens with the keyboard showing. 3. Use the keyboard to enter the name of the city or town you want to plan a route to. You can search for a town, city, or postcode. Tip: To search for a specific city you can use the city's postcode or the country. For example, searching for Essen will return many results. If you search for Essen 2910 or Essen Belgium then that city will be at the top of the results. You can then search in the city.
6. Select the city centre POI. The city centre location is shown on the map. 7. Select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel.
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alternatively, you can search for a specific POI, for example "Rosie's Pizzeria". Note: When searching, the whole map is searched.
6. To see more information about the POI, select the POI on the map and then select the pop-up menu button. Select More Information on the pop-up menu. You see more information about the POI such as the phone number, full address and email. 7. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically.
3. Use the keyboard to enter the name of the POI you want to find, then press the Search button on the keyboard. Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they are available. For example, press and hold the letter "e" to access characters 3 e è é ê ë and more. You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alternatively, you can search for a specific POI, for example "Rosie's Pizzeria".
A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a add a stop to a route that you have already planned. Tip: You can save a route using My Routes.
Tip: You can use the location you selected in other ways, such as adding it to My Places, by selecting the pop-up menu button. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel. The estimated time of arrival is the local time at your destination. Tip: You can add a stop to a route that you have already planned. Tip: You can save a route using My Routes.
Your chosen Place is shown on the map with a pop-up menu. 4. To plan a route to this destination, select Drive/Ride depending on which device you are using. A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the time difference in hours and half hours in the arrival information panel.
Tip: For decimal values you don't have to use a letter to indicate the latitude and longitude. For locations west of the 0 meridian and locations south of the equator, use a minus sign (-) before the coordinate. Degrees, minutes and seconds, for example: N 51°30′31″ W 0°08′34″ GPS standard coordinates, for example: N 51 30.525 W 0 08.569 Note: The bar below the coordinates goes red if you enter coordinates that are not recognised by your Rider. 6.
International, for example, WH6SL.TR10. Country-specific, for example, GBR 8MH.51. Alternative country-specific, for example, GBR 28.Y6VH or GBR LDGZ.VXR. Tip: All the mapcodes in this example are for the same location - Edinburgh Castle in the UK. See About mapcodes for information on how to get a mapcode for a location. 4. As you type in the mapcode, suggestions are shown based on what you have entered. You can continue typing or select a suggestion.
Tip: Information from the Lifetime Traffic service is used when calculating alternative routes. Any route that is 50% longer in time than the original route is not shown. 5. Select your chosen route by tapping on the time balloon. Guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Note: There are two other ways of finding alternative routes: 1. Select Current Route in the Main Menu, followed by Find Alternative. 2.
A pop-up menu shows a list of options. 7. Select Use as Starting Point. 8. Repeat the search steps to choose your destination, and then select Drive/Ride in the pop-up menu. Your route is planned using your chosen starting point and destination. The estimated journey time is shown at the top of the route bar. Tip: Stops, POIs, Places and the destination can all be selected as starting points using their pop-up menus. Tip: You can save the route in My Routes. 9.
A pop-up menu shows a list of options. 3. Select Change to a Stop. Your route is replanned with the starting point changed into a stop. Finding a car park Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To find a car park, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Parking. The map opens showing the locations of car parks.
You can change the screen to show a list of car parks by pressing this button: You can select a car park from the list to locate it on the map. Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. If you want to change how the search is done, select the button to the right of the search box. You can then change where the search is carried out, for example, to search near you or the whole map. 3. Select a car park from the map or the list.
A route is planned and then guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: You can add a car park as a stop on your route by using the pop-up menu. Finding a petrol station Important: In the interest of safety and to avoid distractions while you are driving, you should always plan a route before you start driving. To find a petrol station, do the following: 1. Select the Main Menu button to open the Main Menu. 2. Select Petrol Station.
Tip: You can scroll down the list of results using the scroll bar on the right side of the screen. If you want to change how the search is done, select the button to the right of the search box. You can then change where the search is carried out, for example, to search near you or the whole map. 3. Select a petrol station from the map or the list. A pop-up menu opens on the map showing the name of the petrol station. 4. Select Drive/Ride depending on which device you are using.
Changing your route The Current Route menu When you have planned a route or track, select the Current Route or Current Track button in the Main Menu to open the Current Route or Current Track Menu. The following buttons are available in the menu: Clear Route / Clear Track Skip Next Stop Find Alternative Select this button to clear the currently planned route or track. The Current Route Menu closes and you return to the map view. Select this button to skip the next stop on your route.
Show Instructions Select this button to see a list of turn-by-turn text instructions for your planned route. The instructions include the following: Your current location. Street names. Up to two road numbers shown in road shields whenever available. An instruction arrow. An instruction description. The distance between two consecutive instructions. Exit number. The full addresses of stops on your route.
Drive to Route or Track Select Drive to Route to plan a route from your current location to the starting point of a My Route. The starting point is converted to a stop. Drive to Track plans a route to the nearest point of the track from your current position. Drive to Starting Point On the Current Track menu, select this button to plan a route to the starting point of the track. The starting point is converted to a stop. For more information, see Navigating using a track.
1. Select the Main Menu button to open the Main Menu. 2. Select Current Route. 3. Select Avoid Part of Route. A screen opens showing a list of the sections that comprise your current route. 4. Select the section of the route that you want to avoid. A preview shows you the section you have chosen on the map. 5. Select Avoid. A new route is found that avoids your chosen route section. The new route is shown on the map view.
Ferries and car shuttle trains Carpool Lanes Unpaved Roads Note: Carpool lanes are sometimes known as High Occupancy Vehicle Lanes (HOV lanes) and are not present in every country. To travel on these lanes, you may need to have more than one person in the car, for example, or the car may need to use environmentally-friendly fuel. If you choose to avoid a route feature, a new route is planned.
Your route is recalculated to include your stop. Deleting a stop from your route 1. Press the switch view button to show the map. Your complete route is shown on the map. 2. In the route bar, press the stop you want to delete. The map zooms in to the stop and shows a pop-up menu. Tip: If you select the wrong stop press the back button to return to the map. 3. Select Delete This Stop. The stop is deleted and your route is recalculated.
My Routes About My Routes My Routes provides an easy way to save and retrieve routes and tracks. You may want to use My Routes in one or more of the following situations: While working - Your job involves driving several routes with multiple stops on a daily basis. Your routes can change and you need to be flexible and be able to change the order of your stops or change the planned route. While on holiday - You are going on holiday and want to plan and save a route.
Use a tool such as Tyre Pro to view your track file. Export to a memory card or directly to your computer, then use your computer to view the file using software such as Google Earth. Note: While viewing your recording, you may notice that the recorded GPS locations do not always correspond with the roads. This can happen for several reasons. Firstly, your device tries to keep the files small and this can cause a slight loss of data precision.
7. Select Add to save your route in the My Routes list. Tip: You can also save a route using the Add to My Routes button in the Current Route menu. Navigating using a saved route To navigate using a previously saved route, do the following: 1. In the Main Menu, select My Routes. 2. Select a route from your list. The route is shown on the map view. 3. To navigate to the start of the saved route, select Drive/Ride depending on which device you are using.
Note: Your original route in My Routes is not changed. If you want to see the whole route, select the route again in My Routes. 1. In the Main Menu, select My Routes. 2. Select a route from your list. The route is shown on the map view. 3. Select the stop that you want to use as your starting point, then select the pop-up menu button to open the menu. 4. Select Start Route From Here. Your route is calculated from the new starting point. 5. Select Drive/Ride.
The starting point of your route is converted to your first stop and then the route is planned from your current location. Guidance to your destination begins. As soon as you start driving, the guidance view is shown automatically. Tip: There are two other ways to navigate using a saved route: Select the starting point of the route. When the pop-up menu opens, select Change to a Stop. Alternatively, select Drive to Route or Ride to Route in the Current Route menu.
Tip: To update the saved route in your My Routes list with the changes, select the route om the map then select Save Changes to Route in the pop-up menu. Recording a track You can record a track while you drive, with or without a route planned. After recording, you can then export your track so that you can share it with others or view it using tools such as Tyre Pro. To record a track, do the following: 1. In the Main Menu, select Start Recording.
3. Select the track, then select the pop-up menu. 4. Select Drive to Starting Point. The starting point of the track is converted to your first stop and then the route is planned. Guidance to your destination begins from your current location. As soon as you start driving, the guidance view is shown automatically. Note: You see two different colours on the map for your route and track.
5. When you see a message that your tracks have been exported successfully, remove your memory card to share your tracks with other users. Note: Each exported route is saved as a GPX file in the TomTom Routes folder on your memory card. Importing routes and tracks from a memory card You can import two types of files from a memory card: GPX files - these become tracks after import. ITN files - these become routes after import. ITN files are TomTom itinerary files.
Note: Each exported route is saved as a GPX file in the Bluetooth folder on the receiving device. Importing routes and tracks using Bluetooth You can import two types of files from a Bluetooth-enabled device to your TomTom Rider: GPX files - these become tracks after import. ITN files - these become routes after import. Tip: ITN files are TomTom itinerary files. Friends may share itinerary files with you or you can download both ITN and GPX files from Tyre Pro.
Tip: You can paste your routes into the root directory or the Internal Storage folder. If you have a memory card in your Rider, you can also copy your routes to the SD Card folder. 5. On your Rider, select Done. Your Rider shows the routes you copied. 6. Select one or more routes to import, then select Import. You see the message Importing routes. 7. When you see the message Import Completed, select OK then disconnect your Rider. 8. To view your imported routes and tracks, select My Routes in the Main Menu.
My Places About My Places My Places provides an easy way to select a location without the need to search for the location each time. You can use My Places to create a collection of useful or favourite addresses. Tip: The terms "favourite" and "place" mean the same thing - favourites are places that you go to often. The following items are always in My Places: Home - Your home location can be your home address or somewhere you often visit. This feature provides an easy way to navigate there.
Zoom in on the map at the location you want to select. Press and hold to select the location, then select the home or work location symbol. Select the Search button and search for a location. Select a location to set as home or work. Select Set home location or Set work location. Setting your home or work location using the map 1. In the Map View, move the map and zoom in until you can see your home or work location. 2. Select the location by pressing and holding the screen for about one second.
1. Open the pop-up menu and select Add to My Places. 2. In the name bar, enter the name "Home". Note: "Home" must have a capital letter H. 3. Select Add. Your home location is changed to the new location. Adding a location from My Places 1. In the Main Menu, select My Places. 2. Select Add a new place. 3. To select a location, do one of the following: Zoom in on the map at the location you want to select. Press and hold to select the location, then select the add location symbol. Search for a location.
Adding a location to My Places using search 1. 2. 3. 4. In the Main Menu, select Search. Search for a location. Select the location then select Show on map. When the map view shows the location, select the pop-up menu button. 5. Select Add to My Places. The name of the location appears in the edit screen. 6. Edit the name of the location so you can easily recognise it. 7. Select Done to save your location in the My Places list.
Map Share About Map Share You can report map changes using Map Share. These map changes are then shared with other TomTom device users when they receive a map update. There are two ways to report a map change: Select a location on the map and create the change report immediately. Mark a location and create the change report later. To send your map change reports to TomTom, you must connect your Rider to your computer and use MyDrive Connect. All map changes are verified by TomTom.
5. Note: If you want to report a map correction of a type not shown in the menu, use the Map Share Reporter at tomtom.com. 6. Follow the instructions for your chosen type of map correction. 7. Select Report. 8. Connect your Rider to MyDrive to send your map correction report to TomTom and receive map corrections from other TomTom users. Creating a map change report from a marked location If you see a map inconsistency while you are driving, you can mark the location so you can report the change later.
Note: If you want to report a map change of a type not shown in the menu, use the Map Share Reporter at tomtom.com. 7. Follow the instructions for your chosen type of map change. 8. Select Report. The marker for the marked location is removed from the map. 9. Connect your Rider to MyDrive Connect to send your map change report to TomTom and receive map changes from other TomTom users. Types of map change There are several types of map change available.
Turn Restriction Select this option to report incorrect road turn restrictions. 1. 2. 3. 4. 5. 6. Press and hold to select the location of the map change on the map view. Select the pop-up menu button to open the menu. Select Report Map Error from the pop-up menu. Select Turn Restriction. If the incorrect junction is shown, select Select another junction. Select the approach direction. The map rotates so that the direction you are coming from is shown at the bottom of the screen. 7.
Speed Cameras About speed cameras The Speed Cameras service warns you about the following camera locations: Fixed speed camera locations. Mobile speed camera locations. Mobile speed camera hotspots. Average speed camera locations. Speed enforcement zones. Red light camera locations. Traffic restriction cameras. The Speed Cameras service also warns you about the following safety hazards: Accident blackspot locations.
Symbol shown on map Symbol shown in route bar Description Fixed speed camera - this type of camera checks the speed of passing vehicles and is fixed in one place. Mobile speed camera - this type of camera checks the speed of passing vehicles and can be moved to different locations. Mobile speed camera hotspots - this type of warning shows places where mobile cameras are often used. Average speed cameras - these types of cameras measure your average speed between two points.
Changing the way you are warned To change the way you are warned about speed cameras, select the Sounds and Warnings button in the Settings menu. You can then set how you want to be warned for the different types of cameras and safety hazards. You can change settings for whether you want to be warned, never warned or warned only if you are speeding. For example, to change how you are warned when you approach a fixed speed camera, do the following: 1. 2. 3. 4. Select Sounds & Warnings in the Settings Menu.
2. Select Report Speed Camera. You see a message thanking you for adding the camera. Tip: If you make a mistake when reporting a camera, select Cancel in the message. The speed camera is saved on your Rider automatically and also sent to other users. Confirm or remove a mobile speed camera You can confirm the presence of a mobile speed camera or remove a mobile speed camera if it is no longer present. Just after you pass a mobile speed camera, in the route bar you are asked if the camera was still there.
Danger Zones About danger zones and risk zones The Danger Zones service warns you about danger zones and risk zones on your route when you are in France. Since 3rd January 2012, it has been illegal to receive warnings about the position of fixed or mobile speed cameras when you are driving in France. To be compliant with this change in French law, speed camera locations are no longer reported but instead areas of danger are indicated as danger zones and risk zones.
A symbol is shown in the route bar and on your route on the map. Your distance to the start of the zone is shown in the route bar. You hear a warning sound as you get near the start of the zone. While you are approaching a zone or driving in a zone, your speed is monitored. If you drive more than 5 km/h or 3 mph over the speed limit the route bar turns red. If you drive less than 5 km/h or 3 mph over the speed limit the route bar turns orange.
If a new temporary risk zone is reported directly before or after an existing risk or danger zone, then the new zone is added to the existing zone. If enough Danger Zones users report a new risk zone, that zone may become a danger zone and be available for all subscribers. You can report a risk zone in two ways: Using the quick menu to report a risk zone 1. Select the current location symbol or the speed panel in the guidance view. 2. Select Report Risk Zone from the pop-up menu.
Settings Appearance Select Settings in the Main Menu, then select Appearance. On this screen, you can change these settings: Display Select Display to change the appearance of the display. Route bar Select Route bar to change the information you see in the route bar. Guidance view Select Guidance view to change the information you see in the guidance view. Automatic zoom Select Automatic Zoom to change how you view a junction as you drive.
Night brightness Move the slider to adjust the brightness level of the screen during the night. Select Switch to night colours when dark to automatically switch to night colours when it gets dark. Size of text and buttons Select Size of text and buttons to change the size of the text and the buttons you see on the screen. Note: This feature is only available on devices with a 6 inch / 15 cm or larger screen.
Arrival information Select Arrival information to change the following settings: Show remaining distance Select this setting to show the remaining distance left to travel in the arrival information panel during navigation. Show remaining time Select this setting to show the remaining time left to travel in the arrival information panel during navigation.
Automatic Zoom Select Settings in the Main Menu, then select Appearance. Select Automatic zoom to change settings for the automatic zoom in Guidance view when you approach a turn or a junction. Zooming in can make the turn or junction easier to drive. Zoom in to next turn All the turns and junctions on your route are shown zoomed in to the maximum level. Based on road type The turns and junctions on your route are shown zoomed in to the standard level for the type of road you are on.
Use this setting to control whether street names are read aloud as part of navigation instructions. For example, when street names are read aloud, you hear "Turn left Graham Road towards Hackney." Read aloud foreign street names Use this setting to control whether foreign street names are read aloud as part of navigation instructions, such as "Turn right Champs Élysées". For example, an English computer voice can read and pronounce French street names but pronunciation may not be completely accurate.
Shortest route - the shortest distance between the locations you set. This may not be the quickest route, especially if the shortest route is through a town or city. Most eco-friendly route - the most fuel-efficient route for your journey. Winding route - the route with the most turns. Note: Winding routes are only available for TomTom Rider navigation devices. Avoid motorways - this type of route avoids all motorways. Walking route - a route designed for making the journey on foot.
Cameras Select Settings in the Main Menu, then select Sounds & Warnings. Select Cameras to set how you want to be warned for the different types of cameras. You can set whether you want to be warned, never warned or warned only if you are speeding. Tip: When Speed camera warnings in Settings > Sounds & Warnings switched off then this option is not visible. Hazards Select Settings in the Main Menu, then select Sounds & Warnings. Select Safety warnings.
Language and Units Select Settings in the Main Menu, then select Language & Units. On this screen, you can change the following settings: Language You can see your currently selected language on this screen. Select this setting to change the language used for all buttons and messages that you see on your Rider. When you change the language setting, the voice automatically changes and units are set to automatic. Country You can see your currently selected country on this screen.
Traffic Download speed camera locations Quick Search Send speed camera reports Suggested destinations If you agree, your device suggests destinations. If you disagree at a later time, your historical route information is removed. This means that if you want to receive suggested destinations again at a later time, the feature has to relearn your driving patterns before it can start suggesting destinations. Battery settings Select this setting to control power saving options on your Rider.
Getting Help Help Select Help from the Main Menu or the Settings menu. On this screen, you can see the following information: Guided tour Select this option to get a short tutorial on how to use your navigation device. About See System. More help You can get further help by going to tomtom.com/support. For warranty and privacy information, go to tomtom.com/legal.
Product certification Finding product certification information on your device To find product certification information, such as the ICASA-approved certification number, do the following on your Rider: 1. Select Settings in the Main Menu. 2. Select System. 3. 4. 5. 6. Select About. Select Legal information. Select Certificates. You then see the relevant product certification information for your Rider, for example, ICASA.
Updating using MyDrive Connect About MyDrive Connect MyDrive Connect is a desktop-based application that helps you manage the content and services of your TomTom Rider. For example, you can use MyDrive Connect to get map updates, software updates or manage your TomTom account. It is a good idea to frequently connect your Rider to MyDrive Connect to ensure you always have the latest updates. Tip: We recommend using a broadband internet connection whenever you connect your Rider to MyDrive Connect.
Note: You should plug the USB cable directly into a USB port on your computer and not into a USB hub or USB port on a keyboard or monitor. 5. Enter the requested information for account creation, including your country. When set-up is complete, a TomTom account is created and your Rider is linked to that account. You can now access MyDrive Connect from the notification area on your desktop. MyDrive Connect starts automatically after the account is created.
Addendum Important Safety Notices and Warnings Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) The Global Positioning System (GPS) and Global Navigation Satellite System (GLONASS) systems are satellite-based systems that provide location and timing information around the globe. GPS is operated and controlled by the Government of the United States of America, which is solely responsible for its availability and accuracy.
Keep your seat belts on. Keep a safe distance from the vehicle in front. Before setting off on a motorbike, fasten your helmet correctly. When riding a motorbike, always wear protective clothing and equipment. When riding a motorbike, be extra vigilant and always ride defensively. Rating: DC5V, 1.2A How TomTom uses your information Information regarding the use of personal information can be found at tomtom.com/privacy. Battery This product uses a Lithium-Ion battery.
CE marking This equipment complies with the requirements for CE marking when used in a residential, commercial, vehicular or light industrial environment, achieving all the appropriate provisions of the relevant legislation in the EU. Model numbers: 4GE40 R&TTE directive Hereby, TomTom declares that TomTom products and accessories are in compliance with the essential requirements and other relevant provisions of the EU Directive 1999/5/EC. The declaration of conformity can be found here: tomtom.com/legal.
This GPS Navigation System is a radio transmitter and receiver. It is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Council of the European Union. The SAR limit recommended by The Council of the European Union is 2.0W/kg averaged over 10 grams of tissue for the body (4.0 W/kg averaged over 10 grams of tissue for the extremities - hands, wrists, ankles and feet).
Notice for New Zealand This product displays R-NZ to show it complies with relevant New Zealand regulations. Warning for Australia The user needs to switch off the device when exposed to areas with potentially explosive atmospheres such as petrol stations, chemical storage depots and blasting operations. Notice for Singapore IDA This product displays the Singapore IDA licence number to show that it complies with relevant Singapore regulations.
Copyright notices © 2016 TomTom. All rights reserved. TomTom and the "two hands" logo are registered trademarks of TomTom N.V. or one of its subsidiaries. Please see tomtom.com/legal for limited warranty and end user licence agreements applying to this product. © 2016 TomTom. All rights reserved. This material is proprietary and the subject of copyright protection and/or database rights protection and/or other intellectual property rights owned by TomTom or its suppliers.