User manual

54
3. Click More in the top right hand corner of the screen.
4. Click COPY TO TRAILS.
The trail then appears in the trails list of the PLANNING section.
5. Connect your watch to your computer. Your trail is automatically uploaded to your watch when a
synchronisation is done.
Using breadcrumb trails
Note: Available for all GPS-based activities: Run/Cycle/Freestyle (Runner3 and Spark3) and Trail
running/Hiking/Skiing/Snowboarding (TomTom Adventurer)
Your TomTom GPS Watch can draw a breadcrumb trail for all activities that use GPS. Breadcrumb
trails allow you to see an overview of your route and understand the steps necessary to get back to
your starting point.
Breadcrumb trails show the following information:
 Your current GPS position is shown with a chevron in the centre of the screen.
 Your starting point is shown with a home icon.
 The arrow tells you which direction you are facing when standing still and which direction you are
headed when moving.
 The breadcrumb trail is shown in a North-up view.
 You can switch between a detailed view and an overview depending on the total length of the
breadcrumb trail.
Important: If you are using your watch for the first time, you need to calibrate the compass.
To use a breadcrumb trail, do the following :
1. From the Clock screen, press right and choose an activity that uses GPS, for example, running.