User's Manual

Tone Commander 6210/6220 User Manual 31
From the Installation Options menu, select KEYS.
(Setup → INSTL → KEYS)
The status indicator for each key will indicate the current
setting.
Green – Call Appearance or DSS.
Red – Feature Activator.
Off – Unused or Speed Dial.
On the phone or expansion module, press the multifunction
key to be programmed.
The selected key’s indicator will alternately flash red and
green.
Select CA/DN (Call Appearance /Directory Number), FA
(Feature Activator), DSS (Direct Station Select), SPDIAL
(Speed Dial), or UNUSED from the menu.
Programming procedures for each key type are described
below.
Call Appearance / Directory Number Keys
These “line” keys are used to place and answer calls. If you have
BASIC service, each directory number key is assigned a unique
directory number. If you have CACH EKTS service, one directory
number may be assigned to multiple Call Appearance keys; multiple
calls can be handled on one directory number.
Enter the assigned directory number with the dial pad.
If you need to make corrections while entering numbers,
select
Å BKSP (backspace) to delete the previous digit.
You can press the Done key to return to key selection.
12=CA/DN# 555-789-4251
|BKSP ORIG RESERV
12=CA/DN \
CA/DN FA DSS SPDIAL
12=CA/DN \
UNUSED