Owner manual

Specifications Subject To Change Without Notice Rev 08-12 ©Toner Cable Equipment, Inc.
Heavy Duty Utility Racks
969 Horsham Road
l
Horsham, Pennsylvania 19044 USA
l
Phone: [phone] Fax: [phone]
l
[e-mail]
l
Made of No. 12 gauge
(.104) steel on EIA spacings
(
5
/8-
5
/8-
1
/2) both front and
rear.
l
Uprights 8
1
/8" deep.
l
Panels fit into
1
/2" recess.
Either flat or formed panels
may be used.
l
Vertical members and top
cross piece are welded
together.
l
The base and rear supports
are shipped knocked down.
l
Finished in any Premier
standard color.
FOR 19" WIDE PANELS
Cat No. Width Panel Shpg. Height
Space Wt. Lbs.
RR-2173 21
1
/16" 70 x 19" 90 73
1
/4"
RR-2180 21
1
/16" 77 x 19" 95 80
1
/4"
RR-2100
Series
CHANNEL RELAY RACKS
l
Rigidly constructed of #12 gauge
cold rolled sheet and finished in
any Premier standard color
l
Vertical members and top cross-
brace are welded together.
l
Panel mounting holes are on
E.I.A. spacings (
5
/8-
5
/8-
1
/2).
l
Racks are shipped knocked
down with all necessary bolts for
easy assembly.
l
Base punched to accommodate
CA-4 (2") and CA-5 (3") casters.
TABLE TYPE RELAY RACKS
l
Rigidly constructed of #16
gauge cold rolled sheet steel
and finished in any Premier
standard color.
l
Base constructed of one piece,
similar to a chassis.
l
Panel mounting holes are
tapped for 10/32 machine
screws on E.I.A. spacings (
5
/8-
5
/8-
1
/2).
l
Racks are shipped knocked
down with all necessary bolts
for easy assembly.
Panel Shpg.
Cat No. H. W. D. Space Wt. Lbs.
RR-800 39
1
/4" 20" 18
3
/8" 36
3
/4 x 19" 40
RR-801 74
1
/4" 20" 20
7
/8" 71
3
/4 x 19" 55
RR-802 79
1
/2" 20" 20
7
/8" 77 x 19" 60
RR-803 69" 20" 20
7
/8" 66
1
/2 x 19" 50
RR Series TR Series
Panel Shpg.
Cat No. H. W. D. Space Wt. Lbs.
TR-2119 25" 21" 12" 21 x 19" 17
TR-2819 32" 21" 12" 28 x 19" 20
FOR 24" WIDE PANELS
Cat No. Width Panel Shpg. Height
Space Wt. Lbs.
RR-2673 26
1
/16" 70 x 24" 105 73
1
/4"
RR-2680 26
1
/16" 77 x 24" 105 80
1
/4"