Manual

Cable Pro RTC 360 and F-Conn Connectors

Telephone: Nationwide: Fax: E-mail: Internet:

215-675-2053 800-523-5947 215-675-7543 info@tonercable.com http://www.tonercable.com

12/00

969 Horsham Road

Horsham, Pennsylvania 19044 USA

Cable Pro RTC 360

A True 360°

Round Crimp

• High Quality Stainless Steel Tool

• Makes Standard F-Connector

Universal (Works with F-Conn,

Gilbert, LRC, Pyramid and others)

• 360° Electrical Integrity

• Water-tight Crimp

(Passes SCTE-IPS #TP013)

• Greater Pull-out Strength

(Exceeds minimum pull out of

SCTE-IPS #TP-400)

• Soon Available for RG7 & 11

Cable. Call for details

• Reduces Radiation Leakage

• Also Available with Ratchet

Mechanism

• By reducing the outside and inside diameters by an average of .72 thousandths we achieve the same

reduction in area as you get using a .360 Hex Crimp Tool and a universal connector. This reduction

in area is for the full 360° circumference of the connector (NOT JUST 6 POINTS). The results are an

excellent water and radiation seal while providing a strong connection with improved electrical proper-

ties that maintains a 75 ohm impedance.

• The RTC 360 Crimp Tool is made of hardened stainless steel and utilizes a die to extrude the F-

Fitting into a 360° true round tapered crimp.

• RG-6 cable uses a .342 I.D. connector with a .370 to .375 O.D. This crimp is universal from quad-

shield down to 60% braid.

• RG-59 cable uses a .312 I.D. connector with a .370 to .375 O.D. (Ringed connectors work very well).

This crimp is universal from quad-shield down to 53% braid.

See back for connector ordering information.

PAGE 1
Cable Pro RTC 360 969 Horsham Road Horsham, Pennsylvania 19044 USA A True 360° Round Crimp • High Quality Stainless Steel Tool • Makes Standard F-Connector Universal (Works with F-Conn, Gilbert, LRC, Pyramid and others) • 360° Electrical Integrity • Water-tight Crimp (Passes SCTE-IPS #TP013) • Greater Pull-out Strength (Exceeds minimum pull out of SCTE-IPS #TP-400) • Soon Available for RG7 & 11 Cable. Call for details • Also Available with Ratchet Mechanism See back for connector ordering information.
PAGE 2
FC F-C CONN INDUSTRIES RG-6 6 & RG-5 59 F CONNECTORS FEATURES 1. Internal Rings are drawn into smaller rings around the outer jacket. This forms two small, half O-Rings out of the cable’s outer jacket (see Figure 1). 2. The internal post is extended to provide a larger surface area at the crimp point (See Figure 2). 3. This reduction provides space for the braid to be folded back. The braid cannot reach the crimp area (Figure 1), and therefore the O-Ring seal is preserved.