MSDS

Toner Plastics PLA 3D Printer Filament Page 2 of 7 Rev. 01/01/2015
Reactivity: 0
Special: Not determined
HMIS classification:
Health: 1
Flammability: 1
Reactivity: 0
Personal Protective Equipment: Not determined
3. COMPOSITION/INFORMATION ON INGREDIENTS
Chemical name: Polylactide resin 9051-89-2
Weight %: >98
OSHA Exposure Limits: None
ACGIH Exposure Limits: None
All ingredients in quantities > 1.0% (0.1% for carcinogens) that are potentially
hazardous per OSHA definitions.
Other Standards: N/A
4. FIRST AID MEASURES
Emergency telephone numbers (24 hours a day): [phone]
Eye contact: Rinse immediately with plenty of water, also under the eyelids, for at
least 15 minutes. Call a physician immediately.
Skin contact: Rinse immediately with plenty of water for at least 15 minutes. If
skin irritation persists, call a physician. Cool skin rapidly with cold water after
contact with hot polymer.
Inhalation: Move to fresh air. Call a physician immediately.
Ingestion: Drink water as a precaution. Never give anything by mouth to an
unconscious person. Do not induce vomiting without medical advice. Call a
physician immediately.
Notes to physician: Treat symptomatically.
5. FIRE FIGHTING MEASURES
Flammability:
Autoignition temperature: 388C
Flammability Limits in Air:
Flammable limits in air - lower (%): Not applicable
Flammable limits in air - upper (%): Not applicable