User Guide

welcome

this is your wi-ﬁ router guide

setting up your wi-ﬁ router

Connect your ﬁbre box (the wall unit) to

the red WAN port on your router using

the cable provided

Plug in the power cable

Press the power button

power supply ﬁbre box

power supply

your wi-ﬁ router lights

symbol activity description

power

green light

ﬂashing red

red light

router is working normally

router is booting (up to 10 mins)

router has failed to start up properly

connection green light connected to toob’s full-ﬁbre network

internet green light connected to the internet

wi-ﬁ

green light

slow ﬂashing

fast ﬂashing (2 secs)

o

wi-ﬁ is active (2.4GHz and/or 5GHz)

WPS is in pairing mode

WPS connection successful

disabled

LAN green light external device connected via ethernet cable

engineer installed

PAGE 1
welcome this is your wi-fi router guide setting up your wi-fi router Connect your fibre box (the wall unit) to the red WAN port on your router using the cable provided Plug in the power cable Press the power button engineer installed power supply power supply fibre box your wi-fi router lights symbol activity description power green light flashing red red light router is working normally router is booting (up to 10 mins) router has failed to start up properly connection green light connected to
PAGE 2
connecting to your wi-fi router Connect using wi-fi: use the wi-fi name and password on the back of the router and the wi-fi reference card to connect. Alternatively, scan the QR code on the router and reference card to connect your devices automatically. Connect using wi-fi protected setup (WPS): press the wi-fi pairing button to activate WPS on the router. Then follow the instructions for WPS setup on your device.