241-9784 1.2A ROTARY TOOL Operator’s Manual SAVE THIS MANUAL You will need this manual for safety instructions, operating procedures and warranty. Put it and the original sales receipt in a safe dry place for future reference. For questions about this product, please call 1-866-915-8626 Or send email to: serviceusa@jumbotool.
GENERAL SAFETY RULES WARNING: When using electric tools, machines or equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock, and personal injury. ! 1. WARNING Read and understand all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. 2. Work Area a. Keep your work area clean and well lit. Cluttered benches and dark areas invite accidents. b.
IMPORTANT SAFETY INSTRUCTIONS 5. Tool Use and Care a. Use clamps or other practical ways to secure and support the workpiece to a stable platform. Holding the work by hand or against your body is unstable and may lead to loss of control. b. Do not force tool. Use the correct tools for your application. The correct tools will do the job better and safer at the rate for which it is designed. c. Do not use tools if switch does not turn it on or off.
SAFETY PRECAUTIONS FOR ROTARY TOOL KEEP THE CORD FROM CONTACTING THE TOOL’S MOVING PARTS DO NOT ATTACH WRENCHES TO THE TOOL. If they are attached by a cord or something similar, they could catch in the rotating mechanism and cause injury. GUARD AGAINST ELECTRIC SHOCK. When cutting wherever “live” electrical wires may be encountered, hold the tool only by the plastic gripping surface to prevent electric shock. DO NOT TOUCH ANY METAL PARTS OF THE TOOL.
OPERATING PROCEDURES BITS Your Rotary Tool is designed to accept standard 1/8” bits and accessories. Check to ensure that any attachments you use on this machine are designed for the speeds they will rotate at and the task. WARNING! Never use grinding wheels over 1” (25.4mm) in diameter. The tool’s high speed could cause them to fly apart causing injury. RUNNING THE TOOL 1. Ensure the accessory is securely clamped in the collet. 2. Plug in the tool. 3. Hold the tool firmly. Press the on / off switch.
ACCESSORIES Accessories: 11 pc. Kit A. 1pc Brush--for removing rust and corrosion, polishing metal surfaces B. 2pcs Collets (1/8" & 3/32" )--collets included for attaching accessories C. 1pc Sanding disc--for sanding wood and plastic surfaces D. 1pc Felt polishing wheel--for polishing metals and plastics E. 1pc Aluminum oxide grinding stone--for sharpening, deburring and general purpose grinding on most materials including stainless steel F.
SCHEMATIC DRAWING 1 ! 7 WARNING Repairs should be made by an authorized repair center. Do not open or disassemble this power tool . Contact 1-866-915-8626 for questions regarding this power tool.
TOOL SHOP® 1.2A ROTARY TOOL WARRANTY 1-YEAR LIMITED WARRANTY: This TOOL SHOP® brand power tool carries a 1-Year Limited Warranty to the original purchaser. If the tool fails within one (1) year from the date of purchase, simply bring this tool with your original sales receipt back to your nearest MENARDS® retail store.